Rear Axle / Front End Question for Ice racing

[Bert]

   Sounds good but will it fit with a CCP Stabilizer?   

That would be a good question for Brad...

[SULLY0556]

  Ready for the final mounting.  Nutting took about an hour, pretty easy step.  I also included the nut # and description.  Nutting the studs not only holds them from backing out but adds rigidity to the knob/stud combo.  I couldn't nut the outside studs since there is more rubber to the outside so the studs are more burried.

  ****remember**** these nuts are for the new KK Kanadians which have a #12 shank.  The golds and KK standards have a #8 shank so would take a smaller nut.

[Krandall]

dang. those things are ready to rip!!!!

[SULLY0556]

   YEa, I can't wait till tomorrow to try it out.  Should be a good day.

[Krandall]

What size are the heads on your studs again?

[SULLY0556]

  1/4" head x 1/4" tall.  Standard are 1/4" x 3/16" tall.

[Krandall]

gotcha.

How long are your studs?

And could you take a look @ these 2? What's the difference?

http://www.denniskirk.com/jsp/tpl/product.jsp?store=Main&catId=108&leafCatId=10807&skuId=080511&productId=p080508&mmyId=

vs.

http://www.denniskirk.com/jsp/tpl/product.jsp?store=Main&catId=108&leafCatId=10807&skuId=080515&productId=p080512&mmyId=

[SULLY0556]

  My studs are 1" long.   Both of those look about the same.  Check Ebay for Kold Kutters, You may find a better deal.

http://cgi.ebay.com/ebaymotors/KOLD-KUTTER-ICE-RACING-SCREWS-1-1000-PACK_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1116QQitemZ390001679085QQptZMotorsQ5fATVQ5fPartsQ5fAccessories

[Bert]

Dennis Kirk has a price match guarantee. Shipping to Krandall would only be a day from DK 

[Peelz]

  Ready for the final mounting.  Nutting took about an hour, pretty easy step.  I also included the nut # and description.  Nutting the studs not only holds them from backing out but adds rigidity to the knob/stud combo.  I couldn't nut the outside studs since there is more rubber to the outside so the studs are more burried.

  ****remember**** these nuts are for the new KK Kanadians which have a #12 shank.  The golds and KK standards have a #8 shank so would take a smaller nut.

Dude, I can knock one out in 15-30 seconds. 

Thanks for the pics.

[Krandall]

Dennis Kirk has a price match guarantee. Shipping to Krandall would only be a day from DK 

Or a 10 min drive.

[SULLY0556]

Dennis Kirk has a price match guarantee. Shipping to Krandall would only be a day from DK 

Or a 10 min drive.

   I forget that not everyone lives in the U.P. which is 2-3 days from everywhere. 

[SULLY0556]

  We ran Saturday and the Rappy did pretty well.  I had a tire issue with one of my rears leaking bad around the bead.  I broke it down last night and re-mounted it and it's ok now.     The new tires hook up pretty well, the fronts are amazing and the rears seemed real good till the one went flat. 

[SULLY0556]

   I really need to find some warm riding gloves!  Any suggestions?  I need somethig that won't be too bulky but keep my wimpy hands warm for more than 5 minutes. 

[Krandall]

Look into Snowboarding gloves. 

I have a pair of Rome gloves. Forget which model. But, I've used them all winter riding the rappy, and haven't froze yet.