stroke it?

[Krandall]

I would double check your wiring hook up.. If my memory serves me correctly, there's 2 plugs that have the same kind of connection. Possible you have them reversed?

[660limited]

ok ill check it out again. thanks for the help !!

[660limited]

ok so i just thought i would try uploading a map to the pc3 and my lap top recognizes it but the pc3 software says unable to connect. i tried to reset the pc3 and it still does nothing. so maybe for some whack reason it decided to cop out on me?
and i did double an triple check all connections and they are good and where they are supposed to be..

[Krandall]

hmmmmm,
I would give Jamie @ FuelMotoUSA a call.  877-729-4754
see if he has any ideas. he's a straight shooter and very easy to deal with.

[660limited]

thanks krandall!
ill give him a call an see what he has to say

[preddy08]

Just dont call dyno jet, they are no help at all.

[Krandall]

Any word from Jamie?

[660limited]

i didnt get to speak with jamie but i talked to keith and he pretty much told me i had it hooked up wrong.  so back to the shop tonight and hopefully get this  running

[Krandall]

you should try this then...

remove the pciii entirely.. you should be able to take the 9volt adapter. hook it up, and hook it up to your laptop w/ out issue.
if that doesn't work... sounds like it could be issues.

[660limited]

well keith was correct. i did have it hooked up wrong. the ground wire was hooked up to the starter relay instead of hte battery. i guess in the minute it took me to run from the computer back to the shop after lookin at the pictures on how to install i thought the 2 looked the same. and like you said krandall i hooked up the 9v to it an had a connection right away.
thanks for all thehelp in deciding which way to go with this beast, now time to go have some fun!

[Krandall]

Excellent!!!! Glad to hear it ended up being something simple at least!

[660limited]

i know eh! its always the little simple things that get ya!
either way thanks again !

[660limited]

so back on the trouble wagon. lol

the bike is overheating. or it seems to be gettin quite hot an the coolant starts to leak out.  we removed the thermostat thinkin it might have been bad or whatever. but not the case. is it possible something that there is a blockage somewhere in the system? the plug looks perfect so im pretty sure it not leaning itself out an gettin to hot.


im sure someone can help since you have helped with all my other questions!!

[Kenny]

so back on the trouble wagon. lol

the bike is overheating. or it seems to be gettin quite hot an the coolant starts to leak out.  we removed the thermostat thinkin it might have been bad or whatever. but not the case. is it possible something that there is a blockage somewhere in the system? the plug looks perfect so im pretty sure it not leaning itself out an gettin to hot.


im sure someone can help since you have helped with all my other questions!!

Give me a call as soon as you get a chance...... There is a good chance the head gasket never sealed up good.

[tonyrt44]

where is the coolant leaks from?