Post up those 660's

Started by UncleBeaner, May 08, 2008, 09:22:14 PM

Previous topic - Next topic

Krandall

Awesome. Well done Phil!!!

Lookin forward to the pics w/ the trophy :)


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

dragonz

Even if I don't race next Sunday, I still can't lose.
However I'm just hanging out to really whip some ass.
Last race meet, I got the motor together at 12.30in the am
was up & riding it to run it in at 7am (my neighbours loved that.......NOT)
Trailered it to the race meet
Adjusted valve clearances & upped my jetting (while the first race for my class was running)
Took it easy for the first half of the 2nd race, then gave it a bit & got 6th.
next race was in a 3 way battle for 2nd on the last lap, got off line in last corner then would have cleaned them out in the drag to the line, but was wheelieing too much & heading off course so had to back off to get back to where I was supposed to be going so got 4th.
Last race, 4th into first corner, 2nd into next corner, just couldn't catch the guy in 1st (well modded YFZ450), but pleased with the result finishing 2nd by 2 turns, with over 1/2 lap back to 3rd.
Bike has an intermittent miss still.
Will be upping pilot jets to see if that helps,
have removed park brake cutout (not tested to see if any difference yet)
will do the reverse cotout eliminator
& then possibly replace coil (had a plug cap failure a while ago, so possibly damaged the coil)
If no missfires & I get good starts, no reason not to win a couple on sunday!
2003 Raptor 660LE
719cc with Kenz 13.5:1 piston
X-4 cam & no decomp
39mm FCR's
HV ported head
Ferrea SS Valves
CT Sonic Exhaust
GYTR Clutch

ASR +3+1 A-Arms & Works Tripple Rates
450 Front Calipers
+2 Extended Swingarm
G-Force Axle & Hubs.
Pro Armour Skid Plate
Tusk Nerfs


Gonna be a fun ride now!

Segkast

660 LOVE !!!! Kickass DragonZ !!! Racing sounds like a blast man, keep us posted !!
Oury grips & Yamalube

Krandall

Awesome phil.

Do you by chance have a helmet cam?

Would be great to see some footage from NZ! :clap:


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

dragonz

Well the bike ran like crap, wasn't enjoying it, so parked it up, & watched the others hammer themselves through a very dusty track.
Got my trophy, will post some pics when I can.

Still have major miss-firing problems, so will post in a new thread about that too.
Want to have it sorted by next weekend as I have a date with a dyno, so hope to get some good numbers out of it too :)
2003 Raptor 660LE
719cc with Kenz 13.5:1 piston
X-4 cam & no decomp
39mm FCR's
HV ported head
Ferrea SS Valves
CT Sonic Exhaust
GYTR Clutch

ASR +3+1 A-Arms & Works Tripple Rates
450 Front Calipers
+2 Extended Swingarm
G-Force Axle & Hubs.
Pro Armour Skid Plate
Tusk Nerfs


Gonna be a fun ride now!

dragonz

Still not sure if I have fixed the misfire, will know tomorrow for sure!
Here's some pics from Round 4 of the summer series I was racing in (when the bike first started to play up)
2003 Raptor 660LE
719cc with Kenz 13.5:1 piston
X-4 cam & no decomp
39mm FCR's
HV ported head
Ferrea SS Valves
CT Sonic Exhaust
GYTR Clutch

ASR +3+1 A-Arms & Works Tripple Rates
450 Front Calipers
+2 Extended Swingarm
G-Force Axle & Hubs.
Pro Armour Skid Plate
Tusk Nerfs


Gonna be a fun ride now!

Peelz

first pic is sweet! But...

losing to two suzukis? :door:

:lol: JK cool pics mano
Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"


dragonz

Quote from: PeelsSE2 on March 20, 2010, 07:54:51 AM
first pic is sweet! But...

losing to two suzukis? :door:

:lol: JK cool pics mano
That was at the start of the race. They weren't ahead of me by the end!
& I have the trophy, they don't! :P
2003 Raptor 660LE
719cc with Kenz 13.5:1 piston
X-4 cam & no decomp
39mm FCR's
HV ported head
Ferrea SS Valves
CT Sonic Exhaust
GYTR Clutch

ASR +3+1 A-Arms & Works Tripple Rates
450 Front Calipers
+2 Extended Swingarm
G-Force Axle & Hubs.
Pro Armour Skid Plate
Tusk Nerfs


Gonna be a fun ride now!

Segkast

Since MONTHS have gone by without a bump, here's a little taste :) Enjoy some more 660 love :cheers:

Oury grips & Yamalube

Spartan

Quote from: SegKast on August 19, 2010, 05:08:45 PM
Since MONTHS have gone by without a bump, here's a little taste :) Enjoy some more 660 love :cheers:



Daaaaammmmnnnn....I think this belongs in the NWS section :nod:

Segkast

LOL Almost... Thank Anthony for that pic... and maybe order a calendar, I did... http://www.sandsationscalendars.com/calendar_2011.html
Oury grips & Yamalube

Spartan

Nice...I'll check it out and prob place an order if most of the pics are like that :nod:

Krandall



Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

Segkast

Got my calendar last week, and all's I gotta say is DAMN... February's got a wicked ass !!!
Oury grips & Yamalube

dragonz

2003 Raptor 660LE
719cc with Kenz 13.5:1 piston
X-4 cam & no decomp
39mm FCR's
HV ported head
Ferrea SS Valves
CT Sonic Exhaust
GYTR Clutch

ASR +3+1 A-Arms & Works Tripple Rates
450 Front Calipers
+2 Extended Swingarm
G-Force Axle & Hubs.
Pro Armour Skid Plate
Tusk Nerfs


Gonna be a fun ride now!