Went to get the 700 yesterday...

Started by Livingmylife93, July 02, 2008, 10:35:40 PM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

who else but rk

#15
July 07, 2008, 10:05:25 AM
Quote from: fire raptor on July 06, 2008, 11:00:37 PM
Pull the counter shaft cover and check the sprocket for wear. It is a good indication of how much and hard it has been ridden. Check the a-arms for sand blasting or dents and look under at the skid pan . Do a compression test. Look at the oil and see how dirty it is. Check the grips are they stock and how worn are they. Same for the tires. One of these thing may mean nothing but put them all together and it can give you some indication of how hard it has been used. Good luck and I hope it is a great deal. you will be rolling with the big boys!!
dont forget the scratces on the cases where your foot would be when shifting breaking
2008 KTM 250xc-f
pumpkin lover

Bert

#16
July 07, 2008, 06:56:12 PM
Quote from: fire raptor on July 06, 2008, 11:00:37 PM
Pull the counter shaft cover and check the sprocket for wear. It is a good indication of how much and hard it has been ridden. Check the a-arms for sand blasting or dents and look under at the skid pan . Do a compression test. Look at the oil and see how dirty it is. Check the grips are they stock and how worn are they. Same for the tires. One of these thing may mean nothing but put them all together and it can give you some indication of how hard it has been used. Good luck and I hope it is a great deal. you will be rolling with the big boys!!
Excellent post FR


Quote from: 11Raptor on July 07, 2008, 03:23:37 AM
Quote from: Bert on July 06, 2008, 09:12:02 PM
11Raptor
I don't think the manual says how often to grease the stem mount.
The stock mount doesn't have a zerk to grease but the OMI does  :)

Yeah I know it doesn't...but then I didn't know it needed to be greased so  :confused:

Michael
It would be nice if Yamaha would share that info  ;)

11Raptor

#17
July 07, 2008, 08:37:34 PM
Quote from: Bert on July 07, 2008, 06:56:12 PM
Quote from: 11Raptor on July 07, 2008, 03:23:37 AM
Quote from: Bert on July 06, 2008, 09:12:02 PM
11Raptor
I don't think the manual says how often to grease the stem mount.
The stock mount doesn't have a zerk to grease but the OMI does  :)

Yeah I know it doesn't...but then I didn't know it needed to be greased so  :confused:

Michael
It would be nice if Yamaha would share that info  ;)

Yeah it would....I guess I should grease mine  ???  :bash:

Michael
-2K7 Raptor700 SE2
-Houser +3/4 Blue Steering Stem
-Pro Taper Black SE bars
-ProArmor Kill Switch w/wrist teather
-ProArmor Skid Plates
-ProArmor FAT Peg Black Nerf's
-ITP Holeshot XCR's on ITP SS112's machined w/black
-Yoshi RS-2 Full Titanium Exhaust
-Quadbox FI Power Box
-2K5 2500 Dodge Cummins 4x4 QC w/35's
-EDGE w/Att.

kyledvor61

#18
July 07, 2008, 08:46:09 PM
check the rims make sure it hasnt slapped any curbs :thumbs:

fire raptor

#19
July 07, 2008, 09:53:27 PM
Quote from: kyledvor61 on July 07, 2008, 08:46:09 PM
check the rims make sure it hasnt slapped any curbs :thumbs:
Is RK selling this Quad?

kyledvor61

#20
July 07, 2008, 10:01:10 PM
Quote from: fire raptor on July 07, 2008, 09:53:27 PM
Quote from: kyledvor61 on July 07, 2008, 08:46:09 PM
check the rims make sure it hasnt slapped any curbs :thumbs:
Is RK selling this Quad?

its already sold :lol: :lol: :lol:

poor kid who bought it.... :rofl:
Print
Go Up Pages 1 2
User actions