Alkire's Practice Bike................In The Works

Started by preddy08, October 20, 2011, 09:31:59 PM

Previous topic - Next topic

Alkire193

Quote from: preddy08 on October 09, 2012, 06:34:07 PM
I like the last one, but word of advice, leave out the frame sticker. You'll wear through that in the first race.

I was thinking of not using it because it will block the gunmetal, trimming it up to cover only the under thigh portion behind the fuel tank and leaving the area heading down to the sprocket just frame

dragonz

are we there yet?
How long till this thing runs?
I'm installing my 3-plug head tomorrow :P
2003 Raptor 660LE
719cc with Kenz 13.5:1 piston
X-4 cam & no decomp
39mm FCR's
HV ported head
Ferrea SS Valves
CT Sonic Exhaust
GYTR Clutch

ASR +3+1 A-Arms & Works Tripple Rates
450 Front Calipers
+2 Extended Swingarm
G-Force Axle & Hubs.
Pro Armour Skid Plate
Tusk Nerfs


Gonna be a fun ride now!

Alkire193

Nice. That three plug will be a pretty sweet add.


I'm not sure what's going on with the ol girl anymore. I know Preddy was getting to it, but I haven't heard any updates about what the hold up is

Krandall



Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

Peelz

Quote from: Alkire193 on October 17, 2012, 02:44:34 AM
Nice. That three plug will be a pretty sweet add.


I'm not sure what's going on with the ol girl anymore. I know Preddy was getting to it, but I haven't heard any updates about what the hold up is

he didnt tell you?

we sold that bitch and bought some fancy swords  :thumbs:
Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"


preddy08

Not much to report, nothing big went on last weekend. Finallly got some parts I needed from Cheap Cycle parts. Some more parts went off to the PC'er that I was up in the air about.

TQS +3 TB is finally here.
Just a little 81hp trail bike.


Alkire193

Quote from: preddy08 on October 17, 2012, 07:26:48 PM
Not much to report, nothing big went on last weekend. Finallly got some parts I needed from Cheap Cycle parts. Some more parts went off to the PC'er that I was up in the air about.

TQS +3 TB is finally here.

See guys......just some stragglers gumming up the works.

Krandall



Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

Alkire193

Quote from: Krandall on October 18, 2012, 01:31:28 PM
:thumbs:

When you back in the states, Chris?

Going to Russia in February, maybe i'll come to the states for a week. Then im home for good in July...maybe earlier if they pro-rate my annual bonus and I get my dream job in florida about an hour from campus. We do another LS Rally in 2013 and im there.

dragonz

Well, as predicted, I have my 3 plugger running, including making my own in-frame duals, & yours is still a large collection of bits!
Come on, lets get this puppy mobile!

A-Arms, I made my own.
Made my own mounting for a CCP Steering damper
Duals, made em,
etc,etc.

& I work 60+ hours per week, & am away from home for 3-4 weeks at a time for work (will work out at 8+ months total for this year away)

I'm not superman mind you (I'll leave wearing the underpants over the trousers to Aaron) but my point is that if you set your mind to it, you can achieve a lot, even given limited time & resources
2003 Raptor 660LE
719cc with Kenz 13.5:1 piston
X-4 cam & no decomp
39mm FCR's
HV ported head
Ferrea SS Valves
CT Sonic Exhaust
GYTR Clutch

ASR +3+1 A-Arms & Works Tripple Rates
450 Front Calipers
+2 Extended Swingarm
G-Force Axle & Hubs.
Pro Armour Skid Plate
Tusk Nerfs


Gonna be a fun ride now!

Peelz

Quote from: dragonz on October 22, 2012, 11:29:44 PM
Well, as predicted, I have my 3 plugger running, including making my own in-frame duals, & yours is still a large collection of bits!
Come on, lets get this puppy mobile!

A-Arms, I made my own.
Made my own mounting for a CCP Steering damper
Duals, made em,
etc,etc.

& I work 60+ hours per week, & am away from home for 3-4 weeks at a time for work (will work out at 8+ months total for this year away)

I'm not superman mind you (I'll leave wearing the underpants over the trousers to Aaron) but my point is that if you set your mind to it, you can achieve a lot, even given limited time & resources

yeah this is preddy08 we're talking about....he cant even be bothered to wash his hands, let alone find time to work on someone's quads.  :lol:
Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"


Alkire193

I miss my quad. I remember the day he took photos of it, before it was in containers. It was horrible, but at least it was a real quad!! Now   :cry: now it's just a bunch of random parts held together by screwdrivers. And what's worse! It's in Nebraska! She must be so frightened

Krandall



Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

Alkire193


Krandall

Quote from: Alkire193 on October 26, 2012, 04:25:44 PM
Quote from: Krandall on October 26, 2012, 11:54:28 AM
hears banjo's every night I bet :(

Probably runs on corn and meth now


Or just meth meth.... :( poor lil bugga

Probly got a confederate flag seat now too I bet.


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once