RaptorSource.com
Raptor 700 Information => 700 Motor Mods => Topic started by: preddy08 on October 20, 2011, 09:31:59 PM
-
First off I'd like to thank Chris for trusting me with his new practice bike.
I got the bike Wednesday and on first impressions its a little rough!!!! Pretty much every bearing and bushing is shot. It has some good parts to get a good XC bike going. With a little love it will be a stong runner that should be able to hold its own on any XC course. I did Gunny's bike and thought it turned out great, but this one is with in my realm of XC riding and will have some time to get some seat time on it. I'm really pretty excited to do a XC build. I plan on taking it out for a couple of rides to see how the bike does, then totally take it down and hang some good parts on it. Chris expressed some intrest in doing a motor build on this one. I'm going to get on the horn to see what everyone thinks a good XC motor should be. I think a good port, a mega cycle cam, single exhaust, MAYBE a FCI intake. I'd really like to build a motor that will mellow in the low end, but will scream on the top when needed. My first build of a 105 bore venom 14.1 piston, x-2 cam, Bo's tack head, FCI, single exhaust, and stock stroke. I thought it was PERFECT for the trails and owned everyone in the open fields.
I plan on keeping it simple, hanging the right parts, keeping the weight down, to make a good bike that Chris can hop on and beat on for years!
Few pictues of what I have to work with.
(http://i11.photobucket.com/albums/a195/preddy08/DSC00012.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00011.jpg)
-
I honestly don't think it gets any better than the x-2 in the trails... :thumbs:
-
So what's coming off of that and being replaced? Other than the obvious wear and tear items
-
and the blue/red plastics!
-
and the blue/red plastics!
thank you for saying that which I was thinking....the red hood on blue plastic.... :confused: but hey if hes buying it to practice...screw it :thumbs:
-
black hoods then sell the red ones :lol:
-
I've given Preddy a free pass to do whatever he thinks is right to this one. I only gave him an idea of what I want and let him go with it. So far it's kind of like he is reading my mind. Bo Port, X-cam. I'm liking it all so far. Shawn knows whats up.
Plastics were already going to be sold the second I bought the thing. Nerfs, suspension, grab bar, steering stem, wheels, a-arms, seat, handlebars FC, intake, exhaust, stock head, etc etc etc.......all gone in due time. :thumbs:
I'm lovin this! :clap:
-
If you want to donate any of the suspension parts, I'm game :lol:
-
I'd say use a 5050/RJ, you need a big cam nowadays :thumbs:
-
Is that two stick stabilizers I see? That will never do, puck all the way!
-
Donate them to peelzy? :lol:
-
please do ;) :thumbs:
-
the dual stabilizers are a joke! I cant believe someone rode this bike this way.
-
Peelzy doesn't ride his, so it'd be perfect :thumbs:
-
yeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeep! Ill take it
in my best storage wars voice :lol:
Hey if you have two, you can hook air lines and valves up to them and drive it remotely with pressure. :rofl: ultimate old man build....zero fatigue
-
First off I'd like to thank Chris for trusting me with his new practice bike.
I got the bike Wednesday and on first impressions its a little rough!!!! Pretty much every bearing and bushing is shot. It has some good parts to get a good XC bike going. With a little love it will be a stong runner that should be able to hold its own on any XC course. I did Gunny's bike and thought it turned out great, but this one is with in my realm of XC riding and will have some time to get some seat time on it. I'm really pretty excited to do a XC build. I plan on taking it out for a couple of rides to see how the bike does, then totally take it down and hang some good parts on it. Chris expressed some intrest in doing a motor build on this one. I'm going to get on the horn to see what everyone thinks a good XC motor should be. I think a good port, a mega cycle cam, single exhaust, MAYBE a FCI intake. I'd really like to build a motor that will mellow in the low end, but will scream on the top when needed. My first build of a 105 bore venom 14.1 piston, x-2 cam, Bo's tack head, FCI, single exhaust, and stock stroke. I thought it was PERFECT for the trails and owned everyone in the open fields.
I plan on keeping it simple, hanging the right parts, keeping the weight down, to make a good bike that Chris can hop on and beat on for years
My 12-1, +2 head, FCI 727 stroker was puuuuuurfect...and handed you your ass if I remember right ???
:lol:
-
He let you win Aaron...
-
He let you win Aaron...
You must have to then...Thanks for inflating my ego :thumbs:
:lol:
-
lmao! Everyone is fast til the fast guys show up :thumbs:
-
I think he forgot to mention it was a field of TRX400s...
-
Field of Dreams, wasn't that a movie?
-
if you build it, he will come.
-
Rear skid
http://www.quadzoneforums.com/forums/showthread.php?t=44323
-
I love that piece. Similar to the BRAAP TEC piece that they are still working on. They don't think they make it for the 700 though. I know the 450 sprocket guards fit the 700, but I don't know if that will.
-
There's this one, made for the 700, almost identical. http://www.lsracing.com/yamaha-raptor-700-stainless-steel-skid-plate-yamaha-raptor-700.309.13.atv-utv-racing
-
So what's wrong with the stock rear skid again? It's light, doesn't hang low, and takes a beating
-
It takes a beating along with your rotor and sprockets :lol:
-
It takes the impact away from the rotor and sprockets...if you bend a plastic skid, you can bend it back easy on the trails. Bend an aluminum skid and you're kinda fucked.
-
There is no plastic rear skid out there. I still like the Blingstar rotor guard and LSR outer sprocket guard for simplicity. Check them out on HSDRacing.com
-
http://www.utahsportcycle.com/store/page4.html
If I were running XC, I'd probably try these ricochet plates..
-
It takes the impact away from the rotor and sprockets...if you bend a plastic skid, you can bend it back easy on the trails. Bend an aluminum skid and you're kinda phucked.
Ya thats not going to happen, if you actually get some speed and hit a rock that flimsy plastic skid is as good as nothing there at all. If you are at a slow cruise it might help though.
-
slow cruise is where it's at. :thumbs:
:hefe1:
-
It takes the impact away from the rotor and sprockets...if you bend a plastic skid, you can bend it back easy on the trails. Bend an aluminum skid and you're kinda phucked.
Ya thats not going to happen, if you actually get some speed and hit a rock that flimsy plastic skid is as good as nothing there at all. If you are at a slow cruise it might help though.
Run taller tires and you won't have a problem :lol: Don't most XC guys run like a 23/22 anyways?
-
I dont think anyone runs 23/22, but either way your going to hit some rocks.
-
23/22 = :puke:
Raptors look so bad like that. Look like a 350, or a blaster... And those tires vibrate like a SOB at high speed
-
20/22. It will add height but the rear linkage, rotor and sprocket all need protection. But some races more than others. Snowshoe and Mountain Ridge will be the races to add the protection. But the things I will never need is aluminum frame guards, coolant tank guard and a-arm guards, those are just added weight. swinger, sprocket and belly guard are good enough
and that's 20" rear 22" front for your folks that were in the middle of creating a post to ask if I meant to set my quad up like a dragster.
-
Any updates?
-
Yeah we stole it and moved to mexico :thumbs:
-
I don't know who you are "Krandall's Hero" since I am Krandall's One and Only Hero and I can't send messages to myself
-
well we're even, for forcing me to look at the ridiculously huge sig every day! :rofl: :rofl: :rofl: :rofl:
-
disabled sigs ftmfw
-
Man sorry Chris I've been crazy busy. I had to go out of town for one last ride of the season. I got my new truck home, got the old one sold. I'm hoping to get the bike torn down this week.
-
All good, just sittin'. Mindin' my own. Chillin'. I can't get in touch with Kev so i'm starting to get nervous
-
and that's 20" rear 22" front for your folks that were in the middle of creating a post to ask if I meant to set my quad up like a dragster.
Awww, was soo looking forward to seeing the pics till you said that............... :(
-
Again, sorry for the delay. My life has finally settled down.
Made a bit of progress on the bike tonight. Thought I'd chronical the "fails" along the way :lol:
Few pics of what I've found.
Radiator is patch and bent all to hell!
(http://i11.photobucket.com/albums/a195/preddy08/DSC00026-1.jpg)
The sweet sweet new bumper mounts.
(http://i11.photobucket.com/albums/a195/preddy08/DSC00027-1.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00028.jpg)
She's a little dirty!
(http://i11.photobucket.com/albums/a195/preddy08/DSC00029.jpg)
A good example why yamah runs a gasket on the cover.
(http://i11.photobucket.com/albums/a195/preddy08/DSC00030.jpg)
Misc connector :lol: Found a couple like this.
(http://i11.photobucket.com/albums/a195/preddy08/DSC00031-1.jpg)
This looks a weeee bit scary.
(http://i11.photobucket.com/albums/a195/preddy08/DSC00032.jpg)
More sweetness. I thought I cleaned it good before.
(http://i11.photobucket.com/albums/a195/preddy08/DSC00033.jpg)
As it sits at the moment.
(http://i11.photobucket.com/albums/a195/preddy08/DSC00035.jpg)
-
just...wow
-
just...wow
LOL, I've been saying this all night! :rofl:
-
Well.....that sucks.
If it's damaged, replace it entirely. Already have the radiators (PRM and Fluidyne) with Kev so the stocker is scrap. If im seeing this right, that's water intrusion on the thumb throttle? no bueno :( Good thing it was getting changed anyway
I can order a whole new harness and frame, just say the word. No electrical or duct tape repairs on this thing.
Its getting a new axle anyway, but that doesn't make me smile. AND you were riding it that way! Haha
Thanks for the pics Shawn!
-
I like how I can see 3 tools in the pic.. a ratchet... Extension w/ a torx bit on it... and a BFH!!!!!!! :nod: :clap:
-
So when does the part out begin?
-
I've got a motto Randi. When in doubt, hammer it out! :lol:
-
Top end is off and it doesnt look to bad. It does have a new Weisco piston in it, but the cross hatching is LONG GONE! The Nic is starting to wear off also.
Few pics of what I've found.
(http://i11.photobucket.com/albums/a195/preddy08/DSC00036.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00037.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00038-1.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00039-1.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00041.jpg)
Looks like the skit coating is already wearing off.
(http://i11.photobucket.com/albums/a195/preddy08/DSC00045.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00049.jpg)
-
can't be a real raptor!
it only has 4 valves........... :nod:
-
4 valves > 5 valves
1 TB > 2 carbs
-
4 valves > 5 valves
1 TB > 2 carbs
2 carbs + 5 valves + 3 plugs ..................
-
4 valves > 5 valves
1 TB > 2 carbs
think I agree with this, sorry Dragoooonz. :lol:
-
4 valves > 5 valves.....One less to drop into the cylinder :lol:
-
4 valves > 5 valves
1 TB > 2 carbs
think I agree with this, sorry Dragoooonz. :lol:
The day I can afford to buy a willykiller 3-plug head we shall see the truth of this. :D
I kick 700 ass round home on my 660, so with the 719 I shall surely kick em even better. :thumbs:
& when (if) I put a 3-plugger on it................................... :jaw:
-
4 valves > 5 valves
1 TB > 2 carbs
think I agree with this, sorry Dragoooonz. :lol:
The day I can afford to buy a willykiller 3-plug head we shall see the truth of this. :D
I kick 700 ass round home on my 660, so with the 719 I shall surely kick em even better. :thumbs:
& when (if) I put a 3-plugger on it................................... :jaw:
I'll take that challenge with my lil 4 valve..... :clap:
-
4 valves > 5 valves
1 TB > 2 carbs
2 carbs + 5 valves + 3 plugs .................. = still slower than me.
-
Just don't send that motor to Racers Edge, you'll regret that shit!
-
Just don't send that motor to Racers Edge, you'll regret that shit!
Shawn's got this one so far. Racer goes to TRF
-
Why TRF?
-
Why TRF?
Yeah, are you f'n high?!?!?!
-
I do spray my room with lots of Febreeze everyday then fall asleep in it, but im more brain damaged than high.
Whats wrong with TRF? I heard good things about them. Who else can build a quality 700r race motor to spec?
-
RE
-
RE
FERK RE!!! They'll put the motor back together all half ass.
-
The are only so many companies in this industry and most of the owners know each other so dont burn too many bridges or you may find yourself with cash in hand and no one wanting to take it..... Just sayin....
-
I would think any of the top shops would be able to build your motor however you want it. Barker, Kenz, RE...
-
The are only so many companies in this industry and most of the owners know each other so dont burn too many bridges or you may find yourself with cash in hand and no one wanting to take it..... Just sayin....
Forget burning it, I'll blow that shit up to smithereens!!!
-
Disclaimer: The person who owns the topic of this thread would like to say that he in no way intends this to be an RE bashing thread.
....Remember FDIC...
-
What does Federal Deposit Insurance Corporation have to do with it?
I'm sure Shawn doesn't want to deal with RE either so that would be out anyways if he is taking care of the motor work also. So how about Barker? They can get the same kind of parts and do good work as any of them
-
Ok, I think I have the motor hammered out. This is what I'm thinking. Chris, if you have anythoughts please chime in.
105 bore 10.75 CP piston.
Cylinder bored, and sleeved by Bo and cut down to get you back to about 11.1ish. (Still pump gas friendly)
Bo's megladon head.
50/50 cam that will be about -3 degrees to spread out the power.
Bottom end completely gone though. Can add a +5HR for almost nothing.
I can do a FCI kit with a box and double and tripple check that the mounting is 100% solid. Or do a CFM air box, of stick with a adapter style intake. Up to you.
Exahust, is still up in the air. Leaning twards a sparks, but would like to see what Monster is up to.
-
Link to CFM intake: http://www.cfmperformanceatv.com/raptor700propg.html
-
Also, Chris. If your board (and I know your are) please feel free to start buying any parts you want and have them shipped to my house. I'm about to that point were I can start hanging parts. The bottem end is hanging in the the frame with one loose bolt and the swing arm is just hangin there waiting for me to take it off.
Also, if you see a bumper for another type of quad that you really like I can make a custom mount to fit it.
-
Shawn has been busy :clap:
What do you mean "bottom end completely gone"? Like, the crank is toast? If we +5 the crank then we are talking 771. I loved my 771 in the trails, but do you really want to go that high? We can also just send the OEM to Falicon and have them do some nastiness to it. Maybe lighten it and replace the bearings. New Falicon rod and a cryo treatment or something like that depending on what their say is on it.
Lets do an OEM airbox with an EHS airbox lid. Does anyone make an aluminum intake hose that feeds into the OEM aribox?
Monsters new single exhaust is great. Lets do it! :thumbs:
If we are extending the stock swinger +1 or +2, that needs to be shipped off.
Please ask Bo to ring the cylinder, it just prevents the all to common HG issues everyone experiences. CP piston sounds great. Pump gas OK. Lets order the x-2 and the 50/50 and compare on a dyno. id like to see which has the power delivery for this build.
-
Do they not care about sound at GNCC races?
-
AMA rulings apply. Monster has a quiet core :thumbs:
-
Which suspension are you going with?
-
Shawn has been bouncing from Elka to Fox to Elka to Fox. I think we settled at Elka Stage 5's because $1000 more for Factory Shox wasn't worth it. Whatever he decides ill order them up
-
Who was doing the ring where it has the mating ring valley in the head? Was that Bo or Barker?
-
Bo does it. So does Woofers67. Woofers had a post on MR about welding and cutting the water ports to flow better as well as ringing the cylinder. I know and trust Bo though. One of the only guys on the forums i've sat down for a beer with. :thumbs:
-
Parts are in route :clap: Thanks to Steve @ TQS and Kenneth @ KBMotorsports. They had some of the best prices and selection for my quad!
Ordering more tonight :thumbs:
-
Why in the world do the Canadians get to have all the good parts ???
-
For tires I was thinking something like this.
http://www.rockymountainatvmc.com/productDetail.do?navType=type&priceRange=allPrices&navTitle=Tires+and+Wheels&webTypeId=138&webCatId=8&brandId=allBrands&prodFamilyId=26017
Or this
http://www.maxxis.com/MotorcycleATV/ATV-Sport/RS08-Razr-Xc-Rear.aspx
-
Those will be good for dry conditions. I already wanted the front quadcross tires, so id have to say yes. What about Holeshot HD's in dry conditions?
Semi-muddy ~ RAZR rears with RAZR 2 fronts
Mud ~ GBC afterburns (or similar) and RAZR 2's
Did you get a chance to talk to Kenz about the throttle body?
Kenneth can probably get us a Blue Houser stem, but its going to have to be built from scratch. The black ones are drop ship.
-
About 3/4 of the parts are ordered. :clap:
Does anyone have a good idea for an axle hub nut? The stocker and the one I had with my Durablue axle didn't hold up very well.
-
stock + gorilla tape.....
-
About 3/4 of the parts are ordered. :clap:
Does anyone have a good idea for an axle hub nut? The stocker and the one I had with my Durablue axle didn't hold up very well.
The RPM one is a very nice piece
-
About 3/4 of the parts are ordered. :clap:
Does anyone have a good idea for an axle hub nut? The stocker and the one I had with my Durablue axle didn't hold up very well.
The RPM one is a very nice piece
Are you referring to the threaded nut with two set screws?
-
yeah the main axle nut ....not the Hub nuts
-
yeah the main axle nut ....not the Hub nuts
Sorry, I misspoke. those set screw dont tear up the threads on the axle?
-
you remove the set screws before you thread it onto the axle, and there's a groove at the end of the threads that the set screw bites into.
Wheel hub nut wise, I haven't really seen any alternatives other than what comes on the aftermarket axles. that's what the hitch pin is for...
-
you remove the set screws before you thread it onto the axle, and there's a groove at the end of the threads that the set screw bites into.
Wheel hub nut wise, I haven't really seen any alternatives other than what comes on the aftermarket axles. that's what the hitch pin is for...
Thanks for the info DL and Spartan. ill see about getting one of those over to Preddy
-
Christmas at the Preddy house!
List of what I've got in my hands:
axle
stabilizer
sprocket hub
piston
both slingshots
precision clamps
-
could you get 2 of these kits coming also. I used 90% of the kit on Mikes bike and ran short.
http://www.rockymountainatvmc.com/productDetail.do?navType=type&webTypeId=117&navTitle=Tools%2FShop&webCatId=22&keyword=bolt+kit&prodFamilyId=16412
Really makes going back together alot easier and looks alot nicer!
-
I'm going to need a bumper pretty soon also. I'll need to weld on new tabs before the frame goes off to PC'er
-
Bumper is on its way, got the shipping invoice today. Think late this week or middle next week. That first KB order didn't take long and the bumper is coming from KB also.
Do you want to do some fancy pro bolt stuff or just the TUSK kits? If just the TUSK, ill order them after you respond to this.
What about the twin row carrier? Are you going to punch out the bearings or do you want me to just pick up a new carrier? Those bearings must be shot by now.
I'll also send a 34T honda rear today :thumbs:
LOTS more to come sir! :clap:
-
To quote the great Ice Cube... "today was a good day"
Looky what I came home to today!
(http://i11.photobucket.com/albums/a195/preddy08/photobucket-4255-1323992585245.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00327.jpg)
-
Ok so today I got
GYTR clutch basket
set of 4 XCR tires
HR +5 crank
Power mad dumbo ears
Pro Armor bumper & bumper
Black hood and tank topper
I think thats about it for today :lol:
-
OK Chris. I just took off the front a-arms and two of the bolts were stripped. If you want everything to be 100% good to go you should order ALL NEW OEM bolts, bushings and sleeves for the front end.
Sorry, I dont mean to be a stickler and mean for you to buy more shit than you have to but this front end WILL deserve all new parts.
-
Chris, your bike is now 100% in pieces!
(http://i11.photobucket.com/albums/a195/preddy08/DSC00328.jpg)
-
Damn!
-
Chris, your bike is now 100% in pieces!
(http://i11.photobucket.com/albums/a195/preddy08/DSC00328.jpg)
If, sometime in the future, you work on my bike, please do not post pictures of it torn down. :lol: NOT Seeing it torn in pieces is the reason I would have you do it :lol: It makes me sad.
cant wait to see this one.... :thumbs:
-
Would you believe that lump of parts is gonna F***in FLY!? :clap:
I am so envious of your Shawn! That is the sexiest trailer loading ramp I have ever laid eyes on :nana:
Looks like starting with a clean slate. Anything you need, anything at all, I'll get it on the way. ANY little thing that doesn't measure up i'd be glad to get it new and fresh.
Im going to contact Houser about whether or not their kits come with those parts. Did Jason order the a-arms WITH tric trac? That might determine if I will get new hardware with the arms.
Still need the following:
Block off
Case saver
brake line clamps
grab bar shipped to my buddy Ryan for fabrication
Tether kill switch
Just ordered (in addition to everything else that is still coming in) :
+2" clutch and throttle cables (ATV Galaxy)
Braided Rear Brake cable ATV Galaxy
Love it Preddy, thanks for the photos!
-
Houser sends everything with their arms except the main bolts that go through the frame ( one long ass and two short lower). Hope that helps Chris. I just went with Slicast and not Tric Trac, hear you have to replace Tric Trac setup quite often.
-
Just checked with Houser. You are right Cammy :thumbs:
Ill order some OEM bolts up.
-
;)
-
Houser tree hugger nerfs and HiPers are in route from KBMotorsports. By Friday they should be there. :thumbs: I also had a case saver, sprocket cover and billet dipstick sent your way from TQS. Still waiting on sprockets ???
-
I just got both bolt kits. These are super handy. One of these runs 40 bucks and if you tear your bike down its amost a must!
http://i11.photobucket.com/albums/a195/preddy08/DSC00329.jpg
I also got the GYTR poly skid plate last friday.
-
That is a pretty nice kit. Let me know if I need to order another one, looks like this quad could use it :lol:
Shot you an email about the stem, any thoughts on color? Chrome, Blue, Black, Textured Black or Gold?
-
Textured black may cause a little friction at the mount.......imo
-
Mounting spot should be bare.
-
Piece of tape at the stem would leave it bare and still keep the textured design. Adapt and overcome :clap:
-
:thumbs:
-
Wouldn't need to adapt and overcome anything if the stem surface was smooth to begin with.....
Textured black should go on the lower parts of the quad to hide ware.....imo
-
Textured black will look good!
-
Not saying it won't. Stem is just not the place I would use it. Just sharing my thoughts....
-
I wasn't arguing, I was sharing my thoughts with alkie.
-
I appreciate them, all of them :thumbs:
-
rattlecan it hunter safety orange. :thumbs:
-
rattlecan it hunter safety orange. :thumbs:
I accept all opinions....except Peels
-
When do the shocks come in
-
rattlecan it hunter safety orange. :thumbs:
I accept all opinions....except Peels
:( if I had a soul, I would be sad right now. :rofl:
-
I got a bunch of shit recently.
case saver
bunch of bearings, bushings, and bolts
Oh and this 8)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00330.jpg)
-
Chris, would you want to call Wiigy and get the front end ordered?
-
Um, hell yes to those wheels. Let me know how those tires do when its all done. I figure they will be bald by the time I sit on the quad. :rofl:
I thought you and Wiggy were already in the works for that. I'll call you this evening and you can tell me what you need. Im with Funyun, I kept wondering where they were at. :confused:
-
Oh the lovely bumper mounts.
This is what I found when I cleaned them up..... :rofl:
(http://i11.photobucket.com/albums/a195/preddy08/DSC00332.jpg)
Not sure what I'll have to do just yet, but it'll get fixed up right.
(http://i11.photobucket.com/albums/a195/preddy08/DSC00333.jpg)
-
Want me to send you a factory frame?
On my old frame I cut the lower bumper mount out completely and welded in two pieces of square stock.
-
at this rate, you might as well go to motosport or where ever you're ordering oem stuff from.. and place an order for 1 of everything :lol:
doesn't look to terribly bad. But stilll... ugh.
-
lol did you crash it into a brick wall?
-
He has better crashing skills than I do, he's never even seen it in person yet :rofl:
-
He has better crashing skills than I do, he's never even seen it in person yet :rofl:
are you talking about Alkarie & his bike, or a fat man & his weiner..............
-
:lol: :lol: :lol:
I think the second thought is correct Dragon.
-
Just paid for Houser a-arms and Elka Stage 5 suspension from WIIGs. Now I need to refinance my house.
-
:lol:
-
Bumper mounts should get burned in tomorrow.
(http://i11.photobucket.com/albums/a195/preddy08/DSC00335.jpg)
-
Bumper mounts, shock mount gusset, and steering hoop brace....
-
Awww yeah >:D
Sad fact is, those look stronger than the stockers :lol:
-
I wanted to make them stronger, but not too strong. The metal is twice as thick and the tabs are alot wider.
-
Yea, you want them to fail before the frame does. I'm following. :thumbs:
-
Sidewinder loves Chris :rofl: we got tons of stickers, a novilty mini sprocket and a Christmas CD :rofl:
(http://i11.photobucket.com/albums/a195/preddy08/DSC00336.jpg)
Frames all guseted, and bumper mounts burned in.
(http://i11.photobucket.com/albums/a195/preddy08/DSC00337.jpg)
-
Thing that worries me about the sprockets is the front three all look to be different.
-
They are all Tool Steel. It's a racer package. Each sprocket is different to modify gearing based on conditions. I think I got 13-15 and 36-38. I'll have to double check. If they don't fit i'll have to contact them because they were made to order. Aside from the Frisbee and Christmas CD, that's what comes with every Krause Racing order. I love my cheap lil Krause keychain!
Also, those rears are for a Honda sprocket hub, that's why the bolt holes are countersunk.
-
I like the gussets and new mounts. I keep wondering how the PC will make the frame look
-
Any updates?
-
4-5 weeks for the suspension from Elka, then however many weeks with Wiigstyle for valving and servicing.
-
Better late than never :lol:
Tranny looks good to me.
(http://i11.photobucket.com/albums/a195/preddy08/DSC00338.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00340.jpg)
Dog ears look nice and sharp.
(http://i11.photobucket.com/albums/a195/preddy08/DSC00343.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00349.jpg)
-
Looking good Shawn :thumbs: What do you think about sending the tranny components to Falicon for cryo treatment? They offered it for 100-200 bucks
-
I dont know how I feel about Cryo. I have zero experience with it and it seems others dont care for it much.
-
Actualy got the entire top end in on Friday, but Bo shipped it to my old address. None the less I got some goodies!
Intake:
(http://i11.photobucket.com/albums/a195/preddy08/DSC00367.jpg)
One of th exhausts:
(http://i11.photobucket.com/albums/a195/preddy08/DSC00380.jpg)
Chamber:
(http://i11.photobucket.com/albums/a195/preddy08/DSC00382.jpg)
Sleeved cylinder with Oring:
(http://i11.photobucket.com/albums/a195/preddy08/DSC00386.jpg)
-
How come not a mating groove in the head for the oring?
-
How come not a mating groove in the head for the oring?
The racer will have this
-
How come not a mating groove in the head for the oringGerbil?
The racer riderwill have this
corrected for accuracy.............. :P
-
Nope, racer = race built quad
..i'll leave the gerbil :thumbs:
-
Update!!
According to sources (Preddy), the suspension has been worked on by Wiigy and is en route to Nebraska. PC'ing will start once all components arrive as we are awaiting some stragglers; Seat, intake, exhaust....to name a few. TB goes out this week or next to be bored to +3 for easier starting and the fact that WK's 54 tends to fall off for a lot of people.
Everything is looking up! Pictures coming soon as the suspension arrives. :thumbs:
-
These shocks look amazing in person!!!!
(http://i11.photobucket.com/albums/a195/preddy08/DSC00410.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00417.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00411.jpg)
Custom Houser +1 a-arms with all the goodies!
(http://i11.photobucket.com/albums/a195/preddy08/DSC00412.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00413.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00414.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00415.jpg)
-
*no words*
Thanks go to Elka Suspension, Josh at WiigStyle Racing and Houser Racing for some awesome parts!
-
noticed elkas have black, hard, and soft setting. Bet preddy fiddles with that ALOT.
-
noticed elkas have black, hard, and soft setting. Bet preddy fiddles with that ALOT.
Well if he fiddles with it enough, it will definately cycle between hard & soft. Best he don't tie a string around it unless he really wants it to go black!
-
Little teaser.
(http://i11.photobucket.com/albums/a195/preddy08/2012-05-17_15-19-29_827.jpg)
-
:jaw:
You slut, don't tease!
-
^^^ What he said.
-
lawn is looking good :thumbs:
-
These shocks look amazing in person!!!!
(http://i11.photobucket.com/albums/a195/preddy08/DSC00410.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00417.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00411.jpg)
Saw these shocks this past week and preddy is right.
Bad.
Ass.
-
Sidewinder loves Chris :rofl: we got tons of stickers, a novilty mini sprocket and a Christmas CD :rofl:
(http://i11.photobucket.com/albums/a195/preddy08/DSC00336.jpg)
Biggest waste of money ever,,, sorry u got hooked by that line
-
so has anything actually been put together yet?
Or is Chris the proud owner of a large pile of shiny bits?
-
so has anything actually been put together yet?
Or is Chris the proud owner of a large pile of shiny bits?
Nope, its 95+ in Nebraska so Shawn is afraid of his garage. Got some more stuff in though.
-
Maybe i'm blind, but I don't see the photos of the mock set up for the frame, arms, plastics, etc. that was on MR and Quadzone. Thought those got posted?
-
.
-
Dude, I know I posted them on MR, But how'd they get on Quadzone?
Peals gave me shit for the screw driver for a a-arm bolt :lol:
http://www.moddedraptor.com/community/raptor-700-mods/18212-alkeries-practice-bike-works-10.html
-
I thought you posted here, my bad. Ill post them up.
Some slap together shots, screwdrivers sold separately:
(http://i11.photobucket.com/albums/a195/preddy08/DSC00510.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00511.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00512.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00513.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00515.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00516.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00517.jpg)
-
Dude, I know I posted them on MR, But how'd they get on Quadzone?
Peals gave me shit for the screw driver for a a-arm bolt :lol:
http://www.moddedraptor.com/community/raptor-700-mods/18212-alkeries-practice-bike-works-10.html
The screwdriver is pretty silly, I know I've done it before. :lol:
I put it on Quadzone. They have a rebuild thread and I'm always lurking in it, it was nice to participate
-
Well c'mon Preddy, git 'er done!
We wanna see this thing up & ready to fly!
Nice colour A-Arms btw, I must now paint my top ones to match the bottom I think
-
After about 3 weeks the seat cover finally came in! The colors match perfectly!
(http://i11.photobucket.com/albums/a195/preddy08/2012-08-09_21-01-58_871.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/2012-08-09_21-00-25_477.jpg)
-
Pretty sharp, can't wait to see it installed! :thumbs:
-
update mother phucker!
-
:lol:
-
Update:
Preddy is afraid to go into his garage due to excessive stank from the homosexual orgy last week. The KY got all over the quad and parts then the heat baked it on so he is waiting for it to cool so he can get the man jam and KY off all my stuff and continue working. :nana:
-
man jam keeps all the parts nicely lubed. :thumbs:
-
Damn it, it was 101 degrees here yesterday. No way in hell am I doing anything outside!
:bird:
-
Isn't it about to be a whole year since the start of this build
-
"Awhile" came and went awhile ago
-
good things come to those who wait. :thumbs:
-
:bs: Ive been waiting four years for Preddy to be cool...nothing.
-
Damit man!
I'm working on the nex stage of my build, & you haven't even got this done yet???
I did a full strip, chassis blasted & repainted, Split cases stroker crank rebuld & you still haven't got this done yet?
I recon I will have my 3-plug head installed, & my custom made duals done & this still wont be a runner :P
-
Damit man!
I'm working on the nex stage of my build, & you haven't even got this done yet???
I did a full strip, chassis blasted & repainted, Split cases stroker crank rebuld & you still haven't got this done yet?
I recon I will have my 3-plug head installed, & my custom made duals done & this still wont be a runner :P
Well you can "recon" all you want, but I reckon that once Nebraska decides to be the frozen turd that it is known to be, Shawn will be back out into his garage tinkering.
-
Why cant you buy needle bearing a-arms like a normal person.
This fucking tric trac shit's for the birds! Been going round and round with houser for weeks about this shit! First set of worm gears wouldn't even mesh up :lol:
I just had to go beat the dog because of these damn things! :lol:
-
Toss some needle bearings in the thing. I'm just saying, when I don't get 100whp on the dyno it will be because you keep dialing back on the good stuff. :rofl:
-
Toss some needle bearings in the thing. I'm just saying, when I don't get 100whp on the dyno it will be because you keep dialing back on the good stuff. :rofl:
One more call to Houser and we'll go from there. Unless I'm totally stupid these things are junk!
No install sheet, nothing thier website, nothing via google search :mad:
-
:mad: it. I mean, they say that those things wear out really fast. And unless you have 10 years of seat time you don't even realize the Tric Trac function. Go needle, works for me. Anything will work better than my previous set up.
-
Any word on the graphics kit?
-
Mike and I just spoke about that early last week. He is color matching right now. I gave him the current vendor list and he is pushing for the proofs before October.
-
I took the liberty of checking the forecast for friday. high of 70, low of 44. GAME TIME! :nana:
-
So nice of you to notice the weather around here :lol:
Motor and front suspension is on the bike (with tric trac), so its all down hill from here :lol:
-
Pics or it didn't happen :P
-
:clap: :clap: :clap: :clap: :clap:
-
:clap: :clap: :clap: :clap: :clap:
Well its offical, Cheapcycleparts.com is on my shit list. I ordered a bunch of small parts that I needed to really get the ball rolling and I haven't heard a thing.
Ordered on Saturday night and my order is still "processing".
On a side note I ordered some stuff from ebay on Sunday and they got here yesterday.
-
SHSPowersports.com
Guy treats me like family, gets stuff out in a hurry and I have never had to complain.
...except about their prices, jeesh :(
-
Got a message from Mike today :thumbs:
(http://i35.photobucket.com/albums/d162/bit646/269055_10151788485814119_401412136_n.jpg)
-
Those graphics look SICK!!!!
-
No blue accents? Remember we have quite a bit of blue PCing.
If you can trade the red for blue that would be pretty sweet. Right no it doesn't tie together
-
No blue accents? Remember we have quite a bit of blue PCing.
If you can trade the red for blue that would be pretty sweet. Right no it doesn't tie together
You don't think the red from the suspension will tie in?
-
Not going to work?
-
I dig :nod:
-
I'm just going to through this out there, if you don’t like it, just send it right back....
Keep those graphics as is, red uppers arms, blue front hiper rings, and red rears ???
Once you through in a third semi dominant color, it gets hard to coordinate.
I'm just thinking out loud...
-
I'm just going to through this out there, if you don’t like it, just send it right back....
Keep those graphics as is, red uppers arms, blue front hiper rings, and red rears ???
Once you through in a third semi dominant color, it gets hard to coordinate.
I'm just thinking out loud...
Think away. I agree with you 100% I was trying to offset the overload of blue plastics, nerfs, bars, rings, stem and give it some more gunmetal with a dash of red to tie in the ELKA suspension that has red anodized pieces on it. I'd have to see a side shot of the quad with the suspension to render it properly. I am feeling your blue and red rings thing. It isnt too late to ask Mike to toss out the red and give it some Yama-blue either.
-
All blue?
I think lose the red, keep the white and gunmetal and toss on the blue
-
:thumbs: dig it
-
I like the last one, but word of advice, leave out the frame sticker. You'll wear through that in the first race.
-
I like the last one, but word of advice, leave out the frame sticker. You'll wear through that in the first race.
I was thinking of not using it because it will block the gunmetal, trimming it up to cover only the under thigh portion behind the fuel tank and leaving the area heading down to the sprocket just frame
-
are we there yet?
How long till this thing runs?
I'm installing my 3-plug head tomorrow :P
-
Nice. That three plug will be a pretty sweet add.
I'm not sure what's going on with the ol girl anymore. I know Preddy was getting to it, but I haven't heard any updates about what the hold up is
-
Shawna.. REPORT IN!
-
Nice. That three plug will be a pretty sweet add.
I'm not sure what's going on with the ol girl anymore. I know Preddy was getting to it, but I haven't heard any updates about what the hold up is
he didnt tell you?
we sold that bitch and bought some fancy swords :thumbs:
-
Not much to report, nothing big went on last weekend. Finallly got some parts I needed from Cheap Cycle parts. Some more parts went off to the PC'er that I was up in the air about.
TQS +3 TB is finally here.
-
Not much to report, nothing big went on last weekend. Finallly got some parts I needed from Cheap Cycle parts. Some more parts went off to the PC'er that I was up in the air about.
TQS +3 TB is finally here.
See guys......just some stragglers gumming up the works.
-
:thumbs:
When you back in the states, Chris?
-
:thumbs:
When you back in the states, Chris?
Going to Russia in February, maybe i'll come to the states for a week. Then im home for good in July...maybe earlier if they pro-rate my annual bonus and I get my dream job in florida about an hour from campus. We do another LS Rally in 2013 and im there.
-
Well, as predicted, I have my 3 plugger running, including making my own in-frame duals, & yours is still a large collection of bits!
Come on, lets get this puppy mobile!
A-Arms, I made my own.
Made my own mounting for a CCP Steering damper
Duals, made em,
etc,etc.
& I work 60+ hours per week, & am away from home for 3-4 weeks at a time for work (will work out at 8+ months total for this year away)
I'm not superman mind you (I'll leave wearing the underpants over the trousers to Aaron) but my point is that if you set your mind to it, you can achieve a lot, even given limited time & resources
-
Well, as predicted, I have my 3 plugger running, including making my own in-frame duals, & yours is still a large collection of bits!
Come on, lets get this puppy mobile!
A-Arms, I made my own.
Made my own mounting for a CCP Steering damper
Duals, made em,
etc,etc.
& I work 60+ hours per week, & am away from home for 3-4 weeks at a time for work (will work out at 8+ months total for this year away)
I'm not superman mind you (I'll leave wearing the underpants over the trousers to Aaron) but my point is that if you set your mind to it, you can achieve a lot, even given limited time & resources
yeah this is preddy08 we're talking about....he cant even be bothered to wash his hands, let alone find time to work on someone's quads. :lol:
-
I miss my quad. I remember the day he took photos of it, before it was in containers. It was horrible, but at least it was a real quad!! Now :cry: now it's just a bunch of random parts held together by screwdrivers. And what's worse! It's in Nebraska! She must be so frightened
-
hears banjo's every night I bet :(
-
hears banjo's every night I bet :(
Probably runs on corn and meth now
-
hears banjo's every night I bet :(
Probably runs on corn and meth now
Or just meth meth.... :( poor lil bugga
Probly got a confederate flag seat now too I bet.
-
Dragon, you shut your whore mouth and get ready for some suspension porn!
(http://i11.photobucket.com/albums/a195/preddy08/DSC00637-1.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00634-1.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00636-1.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00639-1.jpg)
-
Wow, so, we talk :mad: and Shawn sends photos. Quick! Get started on his mother
This looks great Shawn! Thanks buddy!
-
Wow, so, we talk :mad: and Shawn sends photos. Quick! Get started on his mother
This looks great Shawn! Thanks buddy!
I "started on his mother" years ago :humper:
-
Well, I prefer my Axis Pro-Air front end more, especially as I built it myself!
Anyway, I have a new challenge for you.
Can you get this bike completed before I get my Yamma-Gamma hybrid built?
This is an RG500 (square 4 2 stroke gp replica motor) that will make 110hp approx
into a YFZ450 chassis.
I still have to:
- fully strip & rebuild the motor
- fabricate the 4 expansion chambers
- fabricate engine mounts
- assemble engine & chassis, & then lobsterback the expansion chambers to fit onto the bike
- make air intakes
- custom nerf bars
- etc
You have a huge headstart, this should be a fair contest. I aim to be running at christmas!
-
UPS guy HATES me :lol:
(http://i11.photobucket.com/albums/a195/preddy08/2012-11-08_17-03-49_209.jpg)
-
What is all that stuff?
-
:rofl:
He forgot about it!! ^^^
-
What is all that stuff?
some packages from colombia...mind your business.
-
:rofl:
He forgot about it!! ^^^
Shush!
I think Shawn taped up the old boxes and wants us to think these are new parts. I am interested to see what's inside (cause I have no idea)
-
no.. really. The best part is.. that you have no idea.. Shawna had to tell me last night, cuz I forgot too!! :) It'll be a pleasant surprise sunshine :kiss:
-
I think it's my quad from Kev, he said it was supposed to be there soon. :thumbs:
-
So he didn't sell all your parts to somebody else? What was the build supposed to be?
-
GNCC turbo kit, before rule changes, etc. Then it was a beefy 727 build. I might still go 727, stock bore with a +1 head and a +3 tb. Im just talking cause I haven't really thought about it. But the Pro Armor box is likely my nerfs, the rest is...well....the rest. Motor is coming soon, he had to break it down and ship the pieces one at a time for it.
There should be some studs, a PC5 or two and some Fluidyne radiators in there. Those are the key items I wanted to get to Shawn's house.
-
Chris, you sir have managed to fill up a 1700 sq ft garage! :rofl:
I've opened a few boxes and its they're full of SHIT! :lol: Just random raptor parts. If you dont mind I'm gonna head to lowes and buy some big ass totes and get some of this shit sorted out.
On a side note the UPS guy that droped the stuff certinly had fun. He took one pallet of shit in the garage and saw what was going on with the raptors and the mustang and struck up a conversation. He didnt leave for 20 minutes :lol:
I'm afraid to open some of the boxes. I roll some of them over and I hear nothing but loose nuts and bolts rattleing around :help: :help: :help: :help: :help: :help: :help:
Also, when I droped the last batch of parts at the PC'er the owner told me about some guy that droped some other parts off that there was some guy that build ATV's out of his garuage and does some really nice work. We figured it out to be me 8) Some how the word around town is getting around Omaha :woot:
-
FYI the poly skids that TAG makes are the SHIT!!!!! I went to Arkansas this last weekend and beat the ole raptor on some extreemly rocky trails and it held up very well! The trail management people built tons of berms across the trails to slow people down. They ended up being jumps. I would jump 4'ish feet off them and bottom out on some 1-2' rocks and thought this skid would be TRASHED! I got home sunday and checked it out and it held up PERFECT!
(http://i11.photobucket.com/albums/a195/preddy08/2012-11-13_21-00-29_294.jpg)
-
Some how the word around town is getting around Omaha :woot:
Yeah, but its Omaha, so, there's that...... :rofl:
Did you also tell them that the atv garage build has been going on for a year? I am sure that will be great for business :lol:
Sorry for all of the random parts, I had no idea what to expect. To be honest, the crank, the piston, the head, the radiators, the studs, the nerfs and the PC5 is my focus because they are all brand new parts, fresh in the boxes. Everything else was scrap when I was riding it at LS. Enjoy hell! :lol:
-
Ok taking a little inventory here. I hope you got everything back.
motorsport nerfs
pro armor grab bar
front 3way brake lines
tie rods with flag
HID kit
headlights
battery tray
some sort of aftermarket a-arms
handlebars
stock stem with rox antivibe rizers, key swtich, big bar adapters, and stabilizers on the bottom (quite the contraption Chris :lol: )
OEM rad with spal fan
OEM brake lever
brake line clamps
another set of tie rods
another set of a-arms (houser)
turner bar pad
new in box pro armor nerfs
tank topper and hood
AC bumper
GT Thunder sprocket guard
big box of random intake, brake levers, wiring harness, the other headlight, tank heat shield, rad hoses, sprockets, etc....
ANOTHER SET of aftermarket a-arms with Elka's
spindles
front hubs
2 OMI steering bushing
PCV
"Weller Racing" head studs x4 ??? :lol: How many bikes we doin :rofl:
NIB Fluidyne rad
GT Thunder 24v kit W/ battery pack
GT rear shock link x2
-
I see no motor or frame
Quad Tech Seat
rear hubs
a +4 swingarm :wtf:
some sort of after market axle, with brake rotor and hub
Rear stock shock and CRJ linkage
-
AND A WHOLE F-U-C-K TUN OF PACKING PEANUTS!!!!!!!!!!!
:horsepop2:
-
I see no motor or frame
Quad Tech Seat
rear hubs
a +4 swingarm :wtf:
some sort of after market axle, with brake rotor and hub
Rear stock shock and CRJ linkage
Frame was trash before LS. Twisted really bad and too many re-welds. I agreed to let that go to scrap. The motor is coming, in pieces, so it will take awhile. Everything on the old one is pretty much not worth having, but it is good for spare parts.
Sorry about the packaging, I told Kev you needed some nuts and he just went with it :lol:
-
AND A WHOLE F-U-C-K TUN OF PACKING PEANUTS!!!!!!!!!!!
:horsepop2:
:rofl:
-
Ok taking a little inventory here. I hope you got everything back.
motorsport nerfs
pro armor grab bar
front 3way brake lines
tie rods with flag
HID kit
headlights
battery tray
some sort of aftermarket a-arms
handlebars
stock stem with rox antivibe rizers, key swtich, big bar adapters, and stabilizers on the bottom (quite the contraption Chris :lol: )
OEM rad with spal fan
OEM brake lever
brake line clamps
another set of tie rods
another set of a-arms (houser)
turner bar pad
new in box pro armor nerfs
tank topper and hood
AC bumper
GT Thunder sprocket guard
big box of random intake, brake levers, wiring harness, the other headlight, tank heat shield, rad hoses, sprockets, etc....
ANOTHER SET of aftermarket a-arms with Elka's
spindles
front hubs
2 OMI steering bushing
PCV
"Weller Racing" head studs x4 ??? :lol: How many bikes we doin :rofl:
NIB Fluidyne rad
GT Thunder 24v kit W/ battery pack
GT rear shock link x2
I don't need the commentary and those handlebars are the best thing that ever happened to that quad!! :rofl:
Looks like everything, good to see all my parts didn't end up in a garbage pile or sold on Ebay. Now if only these parts could be wielded into a quad build of some kind.....
-
wielded or welded or duct taped? ???
Now if only these parts could be wielded into a quad build of some kind.....
-
wielded or welded or duct taped? ???
Now if only these parts could be wielded into a quad build of some kind.....
I wielded my quad. It was a weapon
-
So, whats the plans for the radiator? I have two Spal junk ass fans here. I'd MUCH rather use a OEM unit.
Same with the clutch. I have two slingshot clutches and I'd MUCH rather use a OEM with stiffer springs. I'll have about 10ish more HP than you and I'm still rocking springs and no type of lock up. I FLAT OUT dont like the idea of the slingshot. If you want it I'll do it, but me and several others suggest against it at your HP level.
-
So, whats the plans for the radiator? I have two Spal junk ass fans here. I'd MUCH rather use a OEM unit.
Same with the clutch. I have two slingshot clutches and I'd MUCH rather use a OEM with stiffer springs. I'll have about 10ish more HP than you and I'm still rocking springs and no type of lock up. I FLAT OUT dont like the idea of the slingshot. If you want it I'll do it, but me and several others suggest against it at your HP level.
Do you have the alternate radiator? Should be a used PRM and a new FLuidyne there. FLuidyne would be fine. OEM fan is fine. SPrings on the clutch vs the slingshots is fine
-
I have the Fluidyne sitting here.
So, does the bike get a MSD or PCV?
-
I have the Fluidyne sitting here.
So, does the bike get a MSD or PCV?
MSD for timing and limiting the a wiring mess with the PCV install.
-
Damn, glad I gave this a once over before I ran it in the rear caliper!
(http://i11.photobucket.com/albums/a195/preddy08/DSC00692.jpg)
-
Thoughts on replacing hoses like this? I can clean them up but it takes a long ass time and quite a bit of degreeser. Total PITA, but doable. I've done a couple of of the smaller hoses, but the time and materials is starting to add up. Its no biggey to me.....up to you mang. A power washer didnt phase these bad boys :lol:
(http://i11.photobucket.com/albums/a195/preddy08/DSC00693-1.jpg)
-
We can do a new rear brake line, you think? I thought I ordered one
-
We can do a new rear brake line, you think? I thought I ordered one
I have a new brake line but I was wondering about the line going to the rezi.
Any who....
This is where I stand.
Dogs wanting to help!
(http://i11.photobucket.com/albums/a195/preddy08/DSC00662-1_zps31d441dd.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00676-1_zps92777da7.jpg)
Now down to actual work
(http://i11.photobucket.com/albums/a195/preddy08/DSC00694.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00696-2_zps2e4bea65.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00697-2_zps7d8bb71d.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00701_zpsdfc774b0.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00705_zps607bd1cd.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00706_zpse841d2dd.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00707_zps7cc2ee7f.jpg)
-
I can order a new OEM line. I don't think there are any braided or stronger lines out there for the rear brake ressie.
Looks sharp, those dogs better not think Im paying overtime!
-
is this thing still not running?
-
i am so happy somebody else has decided to try the GPR3 stabilizer with the remote. I am sure you will be as happy with it as i am (even tho shawna will say that it was nothing but a huge PITA!) one thing i found when i went to the remote was that by time i installed remote, clutch lever and grips, i didnt have any room for the stock control cluster (starter/headlights). i added a fly starter switch and was able to run the longer grip (130mm iirc). I happen to have a pingel dual button slimline switch for your starter button and acessory (nos or maybe a horn :lol: ) ( http://pingelonline.com/slimline_controls.htm ) that i want to sell that would look pretty good on those bars, its chrome, anodizing it may be an option if you wanted to change colors. Another thing that you may want to look into is the Renthal Intelilever with the hot start like i have. I liked the feel of the renthal, and you can use the hot start for the reverse button, just buy the Dr D cable for it. Then you can move the key to the reverse lever location. if this is going to be an mx bike, id imagine you will want a handle bar setup free of clutter.
(http://i63.photobucket.com/albums/h156/ekoso/raptor%20mods%20and%20pics/IMGP2388.jpg)
(http://i63.photobucket.com/albums/h156/ekoso/raptor%20mods%20and%20pics/IMGP2387.jpg)
-
I had GPR on my previous build. It really is great to adjust dampening on the fly. Sometimes the knob can get a bit stiff, but once the damper warms up its easy to adjust.
Glad you like it!
-
lookin good preds/alkire
-
And yes, the dogs are workin at time and a half 8)
-
is the dog in the back part welsh corgi?
http://i11.photobucket.com/albums/a195/preddy08/DSC00662-1_zps31d441dd.jpg
-
And yes, the dogs are workin at time and a half 8)
We are in a recession, I will provide unlimited belly rubs provided the work gets done and no one pees on the floor. Final offer
-
And yes, the dogs are workin at time and a half 8)
We are in a recession, I will provide unlimited belly rubs provided the work gets done and no one pees on the floor. Final offer
great deal!
and what are the puppies going to get?
-
And yes, the dogs are workin at time and a half 8)
We are in a recession, I will provide unlimited belly rubs provided the work gets done and no one pees on the floor. Final offer
great deal!
and what are the puppies going to get?
I won't tell the Korean Restaurant their address and when the owners aren't home.....
-
is the dog in the back part welsh corgi?
http://i11.photobucket.com/albums/a195/preddy08/DSC00662-1_zps31d441dd.jpg
She's 100% welsh corgi.
-
is the dog in the back part welsh corgi?
http://i11.photobucket.com/albums/a195/preddy08/DSC00662-1_zps31d441dd.jpg
She's 100% welsh corgi.
man, one of my first dogs was welsh corgi, looks just like her :) :thumbs:
-
little known fact.. the word corgi actually means "Dwarf dog" in the welsh language
-
little known fact: "hefe" means old man who takes advantage of young women" in old latin
-
little known fact: the word "Peels" means asshole in 53 languages
:kiss:
-
Hefe, Peelz, settle down.
Preddy is the only guy who should be getting shit in this thread.
I think most of us will be on zimmer frames before he ever gets this thing done.............
-
Hefe, Peelz, settle down.
Preddy is the only guy who should be getting shit in this thread.
I think most of us will be on zimmer frames before he ever gets this thing done.............
zimmer frames :rofl:
speak english dammit!
-
Hefe, Peelz, settle down.
Preddy is the only guy who should be getting shit in this thread.
I think most of us will be on zimmer frames before he ever gets this thing done.............
zimmer frames :rofl:
speak english dammit!
Learn English dammit.
I do try to translate to 'mercun for you, but its very hard to drawl & mumble while typing :rolleyes:
-
errybody gotz jokes :rofl:
Who keeps abusing their Mod rights?
-
:shrug:
Dunno.
:rofl:
-
Hefe, Peelz, settle down.
Preddy is the only guy who should be getting shit in this thread.
I think most of us will be on zimmer frames before he ever gets this thing done.............
zimmer frames :rofl:
speak english dammit!
Learn English dammit.
I do try to translate to 'mercun for you, but its very hard to drawl & mumble while typing :rolleyes:
:bs: geo does it...daily. :thumbs:
-
Hefe, Peelz, settle down.
Preddy is the only guy who should be getting shit in this thread.
I think most of us will be on zimmer frames before he ever gets this thing done.............
zimmer frames :rofl:
speak english dammit!
Learn English dammit.
I do try to translate to 'mercun for you, but its very hard to drawl & mumble while typing :rolleyes:
:bs: geo does it...daily. :thumbs:
Well I guess being dropped repeatedly on your head will help contribute to that special skill................
-
I hate to tell ya this but its either the GPR OR Fluidyne :lol:
I've spent all weekend on this thing and cant get it to work. I think the radiator mounting is different enough to make not work.
I spoke with Kami two weeks ago and he gave his best pointers. IMO its not gonna work. It rubs pretty bad on the radiator mounted like I have it. Flip it the other way and its even worse.
(http://i11.photobucket.com/albums/a195/preddy08/DSC00708-1.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00710-1.jpg)
-
The pivot arm on the base of the GPR cannot be uninstalled and flipped to the other side?
What exactly is hitting the radiator?
-
The pivot arm on the base of the GPR cannot be uninstalled and flipped to the other side?
What exactly is hitting the radiator?
The way pictured the connecting rod rubs the lower radiator hose and brake line. Also when turned all the way to the right it hits the lower frame rail. I think its hitting the frame rail because I had to mount the connecting arm upside down to even come close to clearing the raidator hose.
If I flip the puck to the other side then actual puck hits the lower radiator "neck".
Kinda hard to put into words, I can get a little video tomorrow.
-
oooh, I like vids :dance:
-
Please not on YouTube. I cant get videos on certain connections these days. Maybe send it to me in low res via email or Vimeo.com? They haven't shut down my access to those yet.
-
Holy cow Vimeo takes a long time to upload.
If I get one comment on the commentary I'll, well....... sit right here and take it :lol: DICKS!
http://vimeo.com/56794626
-
First off, let me say that this was a masterpiece of cinematography. I laughed, I cried, I really wanted the quad to come together at the end, but I understand the need for drama. The audience needs to keep wanting.
Second, where can I buy the soundtrack for this movie?
Third:
We have three options:
1) keep it with the stocker (where is the fun in that?)
2) remove the rad hose lower tube, weld in a cover, bore another hole on further right, or much further left and try again
3) shift the radiator up using strips of metal for the left and right attachment points and thread the lower alignment "peg", screw on a spacer, bolt, peg of some sort so it can sit up higher but still be in the hole and the rad hose will be up out of the way. Then comes the million dollar question.....how will the plastics fit?
ooo.....I have a "4"
4) plumb around the problem. we are using the stock rad hose, we could try creating a frankenstein hose that goes under or over the stab/ brake line area altogether. Use a union, an S-shaped metal tube or hose that will come off the radiator and go up, then attache the stocker to that. Ill do some absolutely horrible sketches for you today.
-
One more thing, is there any way to flip the control arm? The one attached directly to the puck. If you can get that to the opposite side without having to flip the entire puck you have something to work with
I circled the arm I am talking about in this photo. Leave the puck where it is and flip this arm so it comes out the backside, see what happens.
-
Holy cow Vimeo takes a long time to upload.
If I get one comment on the commentary I'll, well....... sit right here and take it :lol: DICKS!
http://vimeo.com/56794626
:lol: :rofl:
I'll actually be helpful here..
Shawna, Could you take the mounting block on it and shorten it? Either the block that the puck is directly mounted to or the block that's mounted to the frame?
-
Holy cow Vimeo takes a long time to upload.
If I get one comment on the commentary I'll, well....... sit right here and take it :lol: DICKS!
http://vimeo.com/56794626
:lol: :rofl:
I'll actually be helpful here..
Shawna, Could you take the mounting block on it and shorten it? Either the block that the puck is directly mounted to or the block that's mounted to the frame?
The block has to be that tall to match the angle of the steering stem :(
-
Holy cow Vimeo takes a long time to upload.
If I get one comment on the commentary I'll, well....... sit right here and take it :lol: DICKS!
http://vimeo.com/56794626
:lol: :rofl:
I'll actually be helpful here..
Shawna, Could you take the mounting block on it and shorten it? Either the block that the puck is directly mounted to or the block that's mounted to the frame?
The block has to be that tall to match the angle of the steering stem :(
the height shouldn't matter, as long as the puck keeps the angle it has.. It would still match the stem.
I thought alos your other suggestion of moving the radiator tube on the actual radiator, but I wonder if you'd lose some cooling properties if you move it.
-
Third:
We have three options:
1) keep it with the stocker (where is the fun in that?)
2) remove the rad hose lower tube, weld in a cover, bore another hole on further right, or much further left and try again
3) shift the radiator up using strips of metal for the left and right attachment points and thread the lower alignment "peg", screw on a spacer, bolt, peg of some sort so it can sit up higher but still be in the hole and the rad hose will be up out of the way. Then comes the million dollar question.....how will the plastics fit?
ooo.....I have a "4"
4) plumb around the problem. we are using the stock rad hose, we could try creating a frankenstein hose that goes under or over the stab/ brake line area altogether. Use a union, an S-shaped metal tube or hose that will come off the radiator and go up, then attache the stocker to that. Ill do some absolutely horrible sketches for you today.
I think you already know my answers here. Every time you modify anything to the extent of cutting/welding or using unions and rerouting line you open up a big window for failure.
I dont think moving the radiator up will work either. If I remember right people using larger radiators already have issues mounting the plastic. Moving it will amplify the problem.
Tonight I'll try flipping the arm to the other side. Just looking at it it should work, but I think I'll have to dismantle the puck to move the arm. I'll give it a shot.
-
I believe in you! :clap:
-
will me trading my arm for yours work? it is always a possibility i guess. Also with our comboined knowhow, we could just make a new arm ??? i have some new skillz i would love to try out.
-
In the imortal words of Borat..... "Great Success!"
http://vimeo.com/56838614
-
In the imortal words of Borat..... "Great Success!"
http://vimeo.com/56838614
:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:
Man Shawna, I miss your sexy voice. Well done sir,.
-
Few progress pictures. I got the GPR all mounted up. I had to make a trip to the hardware store because I didnt like the length of bolt. Stem clamp bolts were way too short. Maybe 4-6 threads catching.
Wiring harness starting to make its way home.
Rear axle in with the honda sprocket! 15 front and 34 rear.
Handle bar lines routed. Tons of crap up there :lol:
(http://i11.photobucket.com/albums/a195/preddy08/DSC00724.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00720.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00717.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00716.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00713-1.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00712-1.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00711.jpg)
The crap pile is starting to dwindle down!!!!!
(http://i11.photobucket.com/albums/a195/preddy08/DSC00719.jpg)
-
AWESOME!! :thumbs: :thumbs: :thumbs: :thumbs: :thumbs:
:clap:
Crisis averted
Thanks for the photos, look at that thing come together!
-
may i suggest redoing the wire harness with blue wireloom? http://www.themustangshop.com/catalog/catalog.cfm?nCategoryID=2287&Cat=Blue ( i just did a search and posted the first site that had what i was talking about) You can get a whole kit with tee's and electrical tape from jegs or summit. I did this on my truck and it looks way sexy
-
In the imortal words of Borat..... "Great Success!"
http://vimeo.com/56838614
:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:
Man Shawna, I miss your sexy voice. Well done sir,.
Oh man... I was all tingly watching that too. :)
-
Few progress pictures. I got the GPR all mounted up. I had to make a trip to the hardware store because I didnt like the length of bolt. Stem clamp bolts were way too short. Maybe 4-6 threads catching.
Wiring harness starting to make its way home.
Rear axle in with the honda sprocket! 15 front and 34 rear.
Handle bar lines routed. Tons of crap up there :lol:
The crap pile is starting to dwindle down!!!!!
Crap-wagon.....we don't have the kill switch yet do we?
What else are we missing?
-
How aboooot the graphics? Kinda waiting on those to put them on in the living room. Cold graphics/plastic = no bueno.
Also, the ASV kit you got was for a 2006 MC. This bike has the 2008+. I have the old one on there right now.
What did you want to do about lights? The bike didnt come with any.
We'll need a kill switch and a light switch. Not sure if anyone makes something like that.
Reuse the old brake block off?
-
How aboooot the graphics? Kinda waiting on those to put them on in the living room. Cold graphics/plastic = no bueno.
Also, the ASV kit you got was for a 2006 MC. This bike has the 2008+. I have the old one on there right now.
What did you want to do about lights? The bike didnt come with any.
We'll need a kill switch and a light switch. Not sure if anyone makes something like that.
Reuse the old brake block off?
Ill order a new brake block off. What is "MC"? Can you point out a kit that will fit better? I think stockers with no bulbs will be just fine. Thing looks funny without lights IMO. Kill switch has to be a tether kill switch, that can mount on the bar clamp. The light switch won't be necessary
-
MC=Master Cylinder
-
brake lever and kill switch is on its way. I am digging for a block off and sprocket/ rotor guard. What did we come up with again? Just running a plate?
Graphics are being cut and printed, should be on its way soon
-
brake lever and kill switch is on its way. I am digging for a block off and sprocket/ rotor guard. What did we come up with again? Just running a plate?
Graphics are being cut and printed, should be on its way soon
for a sprocket guard I'd run one of these. http://www.lsracing.com/honda-trx450-stainless-sprocket-guard-honda-trx450.359.5.atv-utv-racing
-
So, whats the scoop on the graphics?
-
The scoop? YOU CAN'T HANDLE THE SCOOP! :batman:
honestly though, Mike was waiting on another proof to get approved by his customer so he didn't waste the vinyl sheet, then he changed his mind and said he would print it off right away and now he is sick. I will check with him again.
-
damn, did he come down with the gonnaherpisypholitesaids? :lol:
-
So has the motor turned over yet?
is the chassis rolling yet?
Oe will this become the trickest mantle ornament in the history of quadding?
-
yeah Ive become bored by this....
make something happen you overgrown ballbags!!!
:kiss:
need to trademark the business name: "preddy's procrastination inc." :rofl:
-
Found some parts for the build in my room today. Guards and grips! It takes as long as it takes so shut your mouths!! Hehe
-
yeah Ive become bored by this....
make something happen you overgrown ballbags!!!
:kiss:
need to trademark the business name: "preddy's procrastination inc." :rofl:
You shut your pie hole! I'm waiting on parts. Its a complete rolling chassis. Just need graphics to stick on the plastic then get to tidying up the electronics!
-
Got the graphics today :woot: and they look SWEEEEETTTTTT!!!!!! Did you order the ultra, mega, super dooper graphics kit? This thing has 15 seperate stickers!!!!!! :lol:
(http://i11.photobucket.com/albums/a195/preddy08/2013-02-26_20-56-59_204.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/2013-02-26_20-57-22_782.jpg)
-
Whats your thoughts on the main battery? and IMO the 24v system is a waste of time with a lower compression motor. Even on my bike it will start on the first or second revolution.
Also LiPO batteries can be a TOTAL pain, usless they are maintained EXACTLY per the manufactures instructions. GT Thunder says it a good idea for you to buy their 250 dollar charger to maintain proper voltage to the LiPo
-
Just put a GERD DAMN AGM in it!
-
those graphics look badass!!!!
Yeah, AGM 8)
-
Do they even make Lipo batterys for atvs? $250 charger? Whats wrong with the ballistic type batterys? I still got mine 8 cell ebay one, holds a charge like a boss doesn't drain when it sits forever and only cost me just under $100 with quick connectors.
-
I thought I sent you an 8-cell?
forget the 24v, a 12v 8-cell ballistic or antigravity is fine, that way it can charge as I race
Graphics looks great, can't wait to see them on the new plastics! so sexy!
I'll take another look at the levers
-
prreddy's got rc cars on the brain
-
aint
-
that
-
srs
-
Sorry, I ment Lithium Ion
http://www.gtthunder.com/LithiumIon.htm
-
I thought I sent you an 8-cell?
forget the 24v, a 12v 8-cell ballistic or antigravity is fine, that way it can charge as I race
Graphics looks great, can't wait to see them on the new plastics! so sexy!
I'll take another look at the levers
You did send a (2) 4 cells batteries but I've always seen the 4 cell wired up in parallel with a standard battery. Never saw two packs together with out a standard battery.
Maybe I'm just 'tarded ???
-
Option 2 Option 2!!!!
-
Did you get the 8-cell ballistic battery? If I bought two 4-cells then there has to be a special trickle charger from the stator to they don't overheat. They have to be charged slowly.
It's the CCA I was focused on when I purchased them. The CCA was much higher on the ballistics than the lead batteries, lighter too.
-
Dick! :P
-
i just put a 550 cca battery in my grizzly, cost about 100$ iirc, bought it locally, it is a dry cell and is lighter and smaller. it kicks serious ass, doesnt even need different connectors. i cant remember the name but if you are interested i will look. came with a 5 year over the counter replacment warranty.
-
Soooooo, what battery are we running?
Kami, care to chime in?
-
Nope.
-
I think it needs a hand crank to start it.
like a model A. :thumbs:
batteries are for sissies
-
good gravy....
23 pages and a year and a half later, alkire still doesn't have a usable quad...
preddy tearin' it up! :rofl:
-
Nope.
not you ya boob
:lol:
the maple syrup teet sucker.
-
550 CCA battery thats lighter and smaller? That doesn't sound possible lol. Sounds like a car battery.
-
good gravy....
23 pages and a year and a half later, alkire still doesn't have a usable quad...
preddy tearin' it up! :rofl:
Hmmm,
Jokers Vault? ???
-
good gravy....
23 pages and a year and a half later, alkire still doesn't have a usable quad...
preddy tearin' it up! :rofl:
Hmmm,
Jokers Vault? ???
huh? did you just compare preddy to them? :lol:
I wasnt being srs. :rofl:
-
good gravy....
23 pages and a year and a half later, alkire still doesn't have a usable quad...
preddy tearin' it up! :rofl:
Hmmm,
Jokers Vault? ???
huh? did you just compare preddy to them? :lol:
I wasnt being srs. :rofl:
shhh, either was i, don't tell shawna though :rofl:
:takeabow:
-
Cripes...I think JVR would have had it finished by now..
-
Cripes...I think JVR would have had it finished by now..
:lol:
:five:
-
Cripes...I think JVR would have had it finished by now..
:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:
-
I recon I will get my YammaGamma hybrid built before this bike even turns over.........
& I'm not even in the same country as it at present (& I have to get my rappy back together first)
-
Preddy! Help! They are molesting my thread!
-
Cripes...I think JVR would have had it finished by now..
Or at least parted it out and sold it to somebody else...
-
Preddy! Help! They are molesting my thread!
Boo friggin hoo!
Just be like preddy... Grit your teeth and take it. You know it's comin... If you fight, it only gets worse.
-
Preddy! Help! They are molesting my thread!
Boo friggin hoo!
Just be like preddy... Grit your teeth and take it. You know it's comin... If you fight, it only gets worse.
Yea, Pealers right. Play possium and they'll leave you alone :lol:
-
Preddy! Help! They are molesting my thread!
Boo friggin hoo!
Just be like preddy... Grit your teeth and take it. You know it's comin... If you fight, it only gets worse.
Yea, Pealers right. Play possium and they'll leave you alone :lol:
That's when Aaron comes in
:rofl:
-
The struggle only excites us.
-
This is like a snail birthing a turtle.
-
Preddy! Help! They are molesting my thread!
Boo friggin hoo!
Just be like preddy... Grit your teeth and take it. You know it's comin... If you fight, it only gets worse.
Yea, Pealers right. Play possium and they'll leave you alone :lol:
the only possum I know of is a vile Australian marsupial, intorduced to NZ in the early 1900's that breeds like friggn crazy & is a major pest.
So, play possum & I will shoot you or club you to death with the back of a spade & feed you to the dogs
-
Nope.
sorry, i just finally saw this post, i believe it is an odyssey battery, i will look on the weekend to confirm. The local dealer gave me a 7 year over the counter replacment warranty on it even.
-
Preddy! Help! They are molesting my thread!
Boo friggin hoo!
Just be like preddy... Grit your teeth and take it. You know it's comin... If you fight, it only gets worse.
Yea, Pealers right. Play possium and they'll leave you alone :lol:
the only possum I know of is a vile Australian marsupial, intorduced to NZ in the early 1900's that breeds like friggn crazy & is a major pest.
So, play possum & I will shoot you or club you to death with the back of a spade & feed you to the dogs
After he has sex with it of course
-
Preddy! Help! They are molesting my thread!
Boo friggin hoo!
Just be like preddy... Grit your teeth and take it. You know it's comin... If you fight, it only gets worse.
Yea, Pealers right. Play possium and they'll leave you alone :lol:
the only possum I know of is a vile Australian marsupial, intorduced to NZ in the early 1900's that breeds like friggn crazy & is a major pest.
So, play possum & I will shoot you or club you to death with the back of a spade & feed you to the dogs
After he has sex with it of course
multiple times. :thumbs:
-
Preddy! Help! They are molesting my thread!
Boo friggin hoo!
Just be like preddy... Grit your teeth and take it. You know it's comin... If you fight, it only gets worse.
Yea, Pealers right. Play possium and they'll leave you alone :lol:
the only possum I know of is a vile Australian marsupial, intorduced to NZ in the early 1900's that breeds like friggn crazy & is a major pest.
So, play possum & I will shoot you or club you to death with the back of a spade & feed you to the dogs
After he has sex with it of course
multiple times. :thumbs:
I wouldn't even put your dick near one of these nasty critters, not while still alive anyway.
Teeth & claws, carriers of disease (notably bovine tuberculosis) & angry at the world to boot.
But hey, whatever lights your fire!
Cone visit
I'll give you a jar of peanut butter, & send you out in the dark.
Slather yourself liberally, & you should be good to go.
The chances of returning in one piece are about the same as Preddy ever finishing this quad!
-
so...you are saying preddy should cover himself in peanut butter to get motivated?
:thumbs:
-
At this point I'll try anything. Who has coupons for Chunky? I like my men covered in peanut butter with some nuts thrown in :nana:
-
At this point I'll try anything. Who has coupons for Chunky? I like my men covered in peanut butter with some nuts thrown in :nana:
thats so hot....you have no idea.....
Ill bring the jelly :thumbs:
-
IM IN!!!!!!!
For all seriousness. Any update shawna?
-
Yes, I've made some progress last week. I was hoping to work on it last weekend but my hand is still very swollen.
Got the MSD mounted up and wiring sorted out. The MSD is a VERY nice piece!!! really clean compaired to the PCV and Dyna! Just mount the CDI in the tool tray and be done with it!
(http://i11.photobucket.com/albums/a195/preddy08/2013-02-26_21-08-14_823.jpg)
-
:clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap:
-
Yes, I've made some progress last week. I was hoping to work on it last weekend but my hand is still very swollen.
Got the MSD mounted up and wiring sorted out. The MSD is a VERY nice piece!!! really clean compaired to the PCV and Dyna! Just mount the CDI in the tool tray and be done with it!
Thanks Shawn, sorry about your hand. Still looks pretty nice and clean. Too bad I'm going to beat it within an inch of its life like a red-headed step child that didn't call me "Sir".
I will try giving you a call see if there is anything else we are needing
-
He's says he hurt his hand in a bar fight. To me it looks like he was giving handies to a porcupine...just sayin'
-
He's says he hurt his hand in a bar fight. To me it looks like he was giving handies to a porcupine...just sayin'
Potato, Pohtoto
-
He's says he hurt his hand in a bar fight. To me it looks like he was giving handies to a porcupine...just sayin'
I give handies to porcupines, too. Awesome.
:thumbs: rock on.
-
He's says he hurt his hand in a bar fight. To me it looks like he was giving handies to a porcupine...just sayin'
I give handies to porcupines, too. Awesome.
:thumbs: same with a hard on.
hells yea. Get some!
-
He's says he hurt his hand in a bar fight. To me it looks like he was giving handies to a porcupine...just sayin'
I give handies to porcupines, too. Awesome.
:thumbs: same with a hard on.
hells yea. I can do two at once! 8)
skillz
-
but can he actually assemble a running. rideable quad???
I think NOT!
-
but can he actually assemble a running. rideable quad???
I think NOT!
Proved that wrong numerous times so I dont know what you're smokin. :bird:
-
I am going to save a dollar for every day Preddy doesn't have this quad done. I am sure by the time he gets it done I will be able to buy a 2020 raptor 1000 off the showroom floor.
-
wow.
why so much preddy hate?
you guys act like there's some sort of rush to get this done. like chris needs it tomorrow. ???
-
I am just fucking around. I jumped on the band wagon to give preddy a hard time, nothing more. I am sure if Chris wasn't happy with the time frame he would be saying something. The bike looks good and is coming together really well though. If Preddy had a time frame of when Chris wanted it back I wouldn't doubt he would get it done.
-
:lol: fair enough
damn kids :lol:
-
preddy needs it. dont be a bunch of sissies.
were just lookin out for alkire.
or "alkerie" as preddy spells it. :rofl:
and I miss him... probably never see his aryan ass again. :(
-
:asshat:
I have nothing to add to this discussion, but thought that smiley was somewhat relevant to some people in this thread.....cough........cough..........peels
:batman:
-
I have nothing to add to this discussion, other than I like boys just as much as preddy does.
:batman:
:thumbs: be proud!
-
Little Sahara this year, nothing stopping me....if my quad runs. I will see you there Eric!
-
Little Sahara this year, nothing stopping me....if my quad runs. I will see you there Eric!
ummm
OK you must be rockin' some serious LSD.
I want some
:rofl:
-
Little Sahara this year, nothing stopping me....if my quad runs. I will see you there Eric!
ummm
OK you must be rockin' some serious LSD.
I want some
:rofl:
Don't be mean Peelz.
I mean, that thing is soo purty, & all those shiny bits, I recon he'll win most every race before he even gets it off the trailer.
Mind you, if he does, then he better be good at making engine noises & Preddy better be good at pushing
-
Lol dragonz.
And I'm the asshole!?!?
:bird:
:rofl:
-
Lol dragonz.
And I'm the asshole!?!?
:bird:
:rofl:
damn I crack me up sometimes! :P :clap: :nod:
-
Any updates good sir?
-
Update:
preddy likes men. :thumbs:
-
Update:
preddy likes men. :thumbs:
that's not an update..... OLD NEWS.
-
Any updates good sir?
It's got 4 empty cases of Natural Lite on it....3/4 of which were Copenhagen spitters. It also has multiple snail tracks from Shawn's last hoggin hoedown......actually snail railroad tracks, becuase them bitches were 54.5" wide. :lol:
-
Any updates good sir?
It's got 4 empty cases of Natural Lite on it....3/4 of which were Copenhagen spitters. It also has multiple snail tracks from Shawn's last hoggin hoedown......actually snail railroad tracks, becuase them bitches were 54.5" wide. :lol:
this is 100% truth :thumbs:
-
Preddy! Sat it ain't so!
-
Any updates good sir?
It's got 4 empty cases of Natural Lite on it....3/4 of which were Copenhagen spitters. It also has multiple snail tracks from Shawn's last hoggin hoedown......actually snail railroad tracks, becuase them bitches were 54.5" wide. :lol:
Its PBR :bird: I quit chewing and just you never mind the snail trails :bird:
I've been out of town for that last week, give a nucca a break!
-
I've been out of town for that last week, give a nucca a break!
A likely story, I want to see the Whorefax!
-
I've been out of town for that last week, give a nucca a break!
A likely story, I want to see the Whorefax!
LOL
whorefax...this needs to be a real thing. :rofl: :rofl: "need to see where that mouth has been first..."
-
There would be a lot of returned merchandise...
-
There would be a lot of returned merchandise...
nope. no refunds or exchanges. this is my policy. :thumbs:
all sales are final! :mad:
-
There would be a lot of returned merchandise...
nope. no refunds or exchanges. this is my policy. :thumbs:
all sales are final! :mad:
I'm never shopping here again!
-
There would be a lot of returned merchandise...
nope. no refunds or exchanges. this is my policy. :thumbs:
all sales are final! :mad:
I'm never shopping here again!
You talking about Peelz whore shop, or Preddy's Quad building sorry, parts collection agency?
-
Besides from being a very entertaining thread, I think this bike is going to be great. I love trail bikes. Looking forward to the finished product!
-
Besides from being a very entertaining thread, I think this bike is going to be great. I love trail bikes. Looking forward to the finished product!
what bike? :confused:
-
remember when....
-
nope, certainly don't...but then again.
I dont remember 5 minutes ago. :hefe:
-
Ahem. I am sure Shawn is balls deep in the build right now. I am going to be there to pick it up on Friday so I will take pictures then
-
Finally worked up the nerve to work on the bike Saturday night. Thought I'd toss on the exhaust and chain, nice simple hour or two of work. NOOOOOO!!! Sparks changed their design a little and its just enough to screw me. Header hit the oil tank by a good 1/4". Take it back off, shim & shave the tank. Up to a whopping 1/8" clearance now :woot:
Broke the chain to length, got the masterlink put in and for some stupid reason the carrier doesnt like to rotate in the swingarm. I threw some tools, drank a beer and said FERK it for the night!!!
I'm sorry its taking this long, but everything I put on here is screwing me 9 ways from Sunday.
-
Finally worked up the nerve to work on the bike Saturday night. Thought I'd toss on the exhaust and chain, nice simple hour or two of work. NOOOOOO!!! Sparks changed their design a little and its just enough to screw me. Header hit the oil tank by a good 1/4". Take it back off, shim & shave the tank. Up to a whopping 1/8" clearance now :woot:
Broke the chain to length, got the masterlink put in and for some stupid reason the carrier doesnt like to rotate in the swingarm. I threw some tools, drank a beer and said FERK it for the night!!!
I'm sorry its taking this long, but everything I put on here is screwing me 9 ways from Sunday.
I would rather you are able to put in a solid effort than rush this thing. So far I couldn't be any happier with the effort you put in and the results that you are achieving from all your hard work. Thank you Shawn :thumbs:
Now....pics or GTFO :rofl:
-
Now....pics or GTFO :rofl:
:rofl:
we're just givin you the shit that you totally deserve :lol:
ON WITH THE PICS BITCH!!
wait...... Chris, you're gonna be there friday?!
-
Last I knew he was suppose to be here in July.
-
Ahem. I am sure Shawn is balls deep in the build right now. I am going to be there to pick it up on Friday so I will take pictures then
this post is complete BULL sh!T
the only thing shawn is ballz deep in walks on all fours.
-
Sorry, fast-forwarded several weeks. Can't wait to be anywhere but here :clap:
-
Ahem. I am sure Shawn is balls deep in the build right now. I am going to be there to pick it up on Friday so I will take pictures then
Someone get him a whip, leathers and a ball gage already!!!
I'm ballz deep in some Alkire bike ATM! Now where did I put that piston? :clap:
-
Sorry, fast-forwarded several weeks. Can't wait to be anywhere but here :clap:
When the time comes how do you feel about spending some time in Omaha. Get some dinner/beers, and hitup some riding areas?
-
Sorry, fast-forwarded several weeks. Can't wait to be anywhere but here :clap:
When the time comes how do you feel about spending some time in Omaha. Get some dinner/beers, and hitup some riding areas?
Sorry, fast-forwarded several weeks. Can't wait to be anywhere but here :clap:
When the time comes how do you feel about spending some time in Omaha. Get some dinner/beers, and hitup some riding areas?
That sounds awesome! I don't have a ton of time, but I can always make time for you Preddles.
-
When the time comes how do you feel about spending some time in Omaha. Get some dinner/beers, and hitup some riding areas?
I'd love to.
thanks. :thumbs:
-
Hope to start putting my 727 back together this weekend.
Finally got shot of the crap that has been going on since the crank broke.
Bet my quad runs before this one!
Actually that should really scare you.
I will have done 2 builds in less time than it has taken to build this quad, & mine is probably faster.
Oh, & I have made good progress on another quad I'm building as well.
& I'm hardly ever here to work on it.....................
-
Hope to start putting my 727 back together this weekend.
Finally got shot of the crap that has been going on since the crank broke.
Bet my quad runs before this one!
Actually that should really scare you.
I will have done 2 builds in less time than it has taken to build this quad, & mine is probably faster.
Oh, & I have made good progress on another quad I'm building as well.
& I'm hardly ever here to work on it.....................
Are you American? No? Then your opinion is invalid :rofl:
-
Hope to start putting my 727 back together this weekend.
Finally got shot of the crap that has been going on since the crank broke.
Bet my quad runs before this one!
Actually that should really scare you.
I will have done 2 builds in less time than it has taken to build this quad, & mine is probably faster.
Oh, & I have made good progress on another quad I'm building as well.
& I'm hardly ever here to work on it.....................
Want a cookie?
-
Hope to start putting my 727 back together this weekend.
Finally got shot of the crap that has been going on since the crank broke.
Bet my quad runs before this one!
Actually that should really scare you.
I will have done 2 builds in less time than it has taken to build this quad, & mine is probably faster.
Oh, & I have made good progress on another quad I'm building as well.
& I'm hardly ever here to work on it.....................
Want a cookie?
yeah beyotch im hungry!
-
Hope to start putting my 727 back together this weekend.
Finally got shot of the crap that has been going on since the crank broke.
Bet my quad runs before this one!
Actually that should really scare you.
I will have done 2 builds in less time than it has taken to build this quad, & mine is probably faster.
Oh, & I have made good progress on another quad I'm building as well.
& I'm hardly ever here to work on it.....................
Are you American? No? Then your opinion is invalid :rofl:
:rofl: :rofl: :rofl: :rofl: :rofl: :rofl:
-
I always wanted to do this to my quad, but never got around to it. What a better test dummy than Alkire's bike!
Turned out great!
(http://i11.photobucket.com/albums/a195/preddy08/IMG_20130620_204443_172.jpg) (http://s11.photobucket.com/user/preddy08/media/IMG_20130620_204443_172.jpg.html)
(http://i11.photobucket.com/albums/a195/preddy08/IMG_20130620_204251_470.jpg) (http://s11.photobucket.com/user/preddy08/media/IMG_20130620_204251_470.jpg.html)
-
I have no problems with mine
-
I always wanted to do this to my quad, but never got around to it. What a better test dummy than Alkire's bike!
Turned out great!
Yeah, sure. Test whatever you want. Who cares. Not like I slaved over TQSatv's website for 5 whole minutes to get that FCI intake you bored into. :rofl: looks sharp! I'll have to get some kind of Outerwears cover over the whole box. Ill be in water up to the seat sometimes :)
Thanks for the photos, can't wait to see this thing with the graphics and nerfs on
-
Are we there yet?
-
A sweet solution to a broken chain guide tab.
(http://i11.photobucket.com/albums/a195/preddy08/IMG_20130711_213734_004.jpg) (http://s11.photobucket.com/user/preddy08/media/IMG_20130711_213734_004.jpg.html)
-
A sweet solution to a broken chain guide tab.
That is exactly what I was looking for. Nice job!! 2 weeks, Shawn? You ready?
-
Started putting the graphics on and ERMAHGERD!!! could you get a more complete graphics kit!!!! At first I did not like the vibe it was putting off, but tonight I started putting them on and they look KICK ASS!!!!!
(http://i11.photobucket.com/albums/a195/preddy08/DSC01305.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC01305.jpg.html)
ERMAHGERD TOTAL PITA!!
(http://i11.photobucket.com/albums/a195/preddy08/DSC01306.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC01306.jpg.html)
(http://i11.photobucket.com/albums/a195/preddy08/DSC01307.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC01307.jpg.html)
(http://i11.photobucket.com/albums/a195/preddy08/DSC01308.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC01308.jpg.html)
(http://i11.photobucket.com/albums/a195/preddy08/DSC01309.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC01309.jpg.html)
-
Started putting the graphics on and ERMAHGERD!!! could you get a more complete graphics kit!!!! At first I did not like the vibe it was putting off, but tonight I started putting them on and they look KICK ASS!!!!!
ERMAHGERD TOTAL PITA!!
Sorry Shawn. They were supposed to be full fender decals so the blue was just a highlight. Maybe something was lost in translation. Decals never look good until the finished product. I love it! :clap: Check out that SPARKS pipe, I am gonna f*** that thing up!!
Do we need anything else?
-
are you putting anything over the decals on the frame? (like that 3m clear guard stuff)?
-
are you putting anything over the decals on the frame? (like that 3m clear guard stuff)?
I've tried that clear guard shit and its rubbed off in a matter of a couple of rides. Not worth it.
-
clear packaging tape? :lol:
-
Clear 2-pot is the way to go to protect the decals.
I add plasticiser (same as if I was painting the plastics) as it makes the clear very tough & chip resistant
-
First off I'd like to thank Chris for trusting me with his new practice bike.
I got the bike Wednesday and on first impressions its a little rough!!!! Pretty much every bearing and bushing is shot. It has some good parts to get a good XC bike going. With a little love it will be a stong runner that should be able to hold its own on any XC course. I did Gunny's bike and thought it turned out great, but this one is with in my realm of XC riding and will have some time to get some seat time on it. I'm really pretty excited to do a XC build. I plan on taking it out for a couple of rides to see how the bike does, then totally take it down and hang some good parts on it. Chris expressed some intrest in doing a motor build on this one. I'm going to get on the horn to see what everyone thinks a good XC motor should be. I think a good port, a mega cycle cam, single exhaust, MAYBE a FCI intake. I'd really like to build a motor that will mellow in the low end, but will scream on the top when needed. My first build of a 105 bore venom 14.1 piston, x-2 cam, Bo's tack head, FCI, single exhaust, and stock stroke. I thought it was PERFECT for the trails and owned everyone in the open fields.
I plan on keeping it simple, hanging the right parts, keeping the weight down, to make a good bike that Chris can hop on and beat on for years!
Few pictues of what I have to work with.
(http://i11.photobucket.com/albums/a195/preddy08/DSC00012.jpg)
(http://i11.photobucket.com/albums/a195/preddy08/DSC00011.jpg)
Remember when this was 2 years ago
(http://i.imgur.com/jcvkZxC.png)
-
You son of a.... :rofl:
-
LOL!!!
elephants remember too!
(http://myelephantmuse.files.wordpress.com/2010/04/elephants-never-forget.jpg)
-
(http://images.ridemonkey.com/index.php?size=full&src=http%3A%2F%2Ffarm5.static.flickr.com%2F4138%2F4944311632_1ae9714898.jpg)
-
(http://i.imgur.com/kKpm6C3.jpg)
-
(http://i.qkme.me/2gkh.jpg)
-
(http://s3.amazonaws.com/rapgenius/this-thread-makes-me-moist.jpg)
-
(http://i.imgur.com/Mpu3ri6.png)
-
(http://i.imgur.com/AFb1dNS.png)
-
(http://i.imgur.com/i7rloNE.png)
-
(http://i.imgur.com/w8LdPUD.png)
-
Krandall, that theres the winner :rofl:
(http://i.qkme.me/3vfh0v.jpg)
-
:rofl:
-
is it done yet? I feel like a stripper having $130 just sitting on my dresser in a jar...
-
Yup, pretty sure I hate you ass hats!
-
will have my rebuilt 727 back together next weekend..........
-
Yup, pretty sure I hate you ass hats!
:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:
LUV YOU SHAWNA!! :kiss:
-
hate you too buddy. :thumbs:
(http://i.qkme.me/3vg667.jpg)
-
Chris, I'm sorry to have to report that your quad was parted out, and the money was used on 5.0 mustang parts and 300lbs strippers.
-
(http://i.qkme.me/3vg7b9.jpg)
-
Bravo :thumbs:
:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:
-
(http://i.qkme.me/3vg7q1.jpg)
-
(http://i.qkme.me/3vg7q4.jpg)
-
(http://i.qkme.me/3vg7q1.jpg)
:rofl: :rofl: :rofl:
-
(http://i.qkme.me/3vgae7.jpg)
-
:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:
-
(http://i.qkme.me/3vgah6.jpg)
-
(http://i.qkme.me/3vgaqj.jpg)
-
(http://i.qkme.me/3vgars.jpg)
-
^^^^^^^^^^^^ :rofl:
(http://i.qkme.me/3vgas8.jpg)
-
^^^ :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:
(http://i.qkme.me/3vgata.jpg)
-
FUKIN DYIN!
(http://i.qkme.me/3vgau3.jpg)
-
(http://i.qkme.me/3vgaui.jpg)
-
(http://i.qkme.me/3vgax6.jpg)
-
^^^^^^ OMFG :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:
(http://i.qkme.me/3vgaxm.jpg)
-
(http://i.qkme.me/3vgazk.jpg)
-
(http://i.qkme.me/3vgb0v.jpg)
-
(http://i.qkme.me/3vgb12.jpg)
-
(http://i.qkme.me/3vgb3n.jpg)
-
:rofl: :clap:
-
(http://i.qkme.me/3vgb6w.jpg)
-
:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:
-
(http://i.imgur.com/TktjUUv.png)
-
(http://i.imgflip.com/2wevx.jpg)
-
(http://i.imgflip.com/2wey6.jpg)
-
(http://i.imgflip.com/2wezk.jpg)
-
(http://i.qkme.me/3vgbhg.jpg)
-
(http://i.imgflip.com/2wf2d.jpg)
-
(http://i.imgflip.com/2wf5w.jpg)
-
(http://i.qkme.me/3vgbjd.jpg)
-
(http://i.qkme.me/3vgbkv.jpg)
-
WINNER! :rofl:
(http://i.qkme.me/3vgbkv.jpg)
-
(http://i.imgflip.com/2wf90.jpg)
-
(http://i.qkme.me/3vgbnn.jpg)
-
(http://i.imgflip.com/2wffe.jpg)
-
(http://i.imgflip.com/2wfhk.jpg)
-
(http://i.imgflip.com/2wfj6.jpg)
-
(http://i.qkme.me/3vgbqv.jpg)
(http://i.qkme.me/3vgbqt.jpg)
-
LMAO
"that's a paddlin"
(http://i.imgflip.com/2wfno.jpg)
-
(http://i.qkme.me/3vgbs0.jpg)
-
(http://i.qkme.me/3vgbsp.jpg)
-
(http://i.imgflip.com/2wftc.jpg)
-
(http://i.imgflip.com/2wfv9.jpg)
-
(http://i.imgflip.com/2wfwz.jpg)
-
(http://i.qkme.me/3vgbwn.jpg)
-
(http://i.imgflip.com/2wfzh.jpg)
-
(http://i.imgflip.com/2wg0t.jpg)
-
(http://i.imgflip.com/2wg2v.jpg)
-
(http://i.imgflip.com/2wg8i.jpg)
-
preddy trying jedi mind tricks now...
(http://i.imgflip.com/2wgdw.jpg)
-
(http://i.imgflip.com/2wgk0.jpg)
-
(http://i.imgflip.com/2wffe.jpg)
Should Have Put ' I Have A Special Set Of Skills, Building Quads In Less Than 2 Yrs Isnt One Of Them.
-
:sit:
(http://i11.photobucket.com/albums/a195/preddy08/b82b9e2e-1c88-4e29-895b-35f851a50160.jpg) (http://s11.photobucket.com/user/preddy08/media/b82b9e2e-1c88-4e29-895b-35f851a50160.jpg.html)
-
(http://i11.photobucket.com/albums/a195/preddy08/DSC01354.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC01354.jpg.html)
(http://i11.photobucket.com/albums/a195/preddy08/DSC01353.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC01353.jpg.html)
(http://i11.photobucket.com/albums/a195/preddy08/DSC01351.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC01351.jpg.html)
(http://i11.photobucket.com/albums/a195/preddy08/DSC01350.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC01350.jpg.html)
(http://i11.photobucket.com/albums/a195/preddy08/DSC01349.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC01349.jpg.html)
(http://i11.photobucket.com/albums/a195/preddy08/DSC01348.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC01348.jpg.html)
(http://i11.photobucket.com/albums/a195/preddy08/DSC01347.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC01347.jpg.html)
(http://i11.photobucket.com/albums/a195/preddy08/DSC01346.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC01346.jpg.html)
(http://i11.photobucket.com/albums/a195/preddy08/DSC01345.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC01345.jpg.html)
(http://i11.photobucket.com/albums/a195/preddy08/DSC01344.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC01344.jpg.html)
(http://i11.photobucket.com/albums/a195/preddy08/DSC01343.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC01343.jpg.html)
(http://i11.photobucket.com/albums/a195/preddy08/DSC01342.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC01342.jpg.html)
(http://i11.photobucket.com/albums/a195/preddy08/DSC01340.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC01340.jpg.html)
(http://i11.photobucket.com/albums/a195/preddy08/DSC01339.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC01339.jpg.html)
-
Hummmm
This or that?
(http://i11.photobucket.com/albums/a195/preddy08/DSC00011.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC00011.jpg.html)
(http://i11.photobucket.com/albums/a195/preddy08/DSC01339.jpg) (http://s11.photobucket.com/user/preddy08/media/DSC01339.jpg.html)
-
looks GREAT shawna!!!!!!!!!!!!! :clap:
-
Looks damn good...but I think a white hood and topper would set it off.
-
(http://i.qkme.me/3vh2mm.jpg)
-
VERY nice! :clap: :clap: :clap: :clap:
FINALLY
-
:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:
I'm dying, these meme's are great!!
The whole, "Hey Shawn I'm in TN looking to pick up this weekend" really lit a fuse.
Shawn it looks like a beast, thank you for putting up with me. BADASS! :jaw:
:thumbs: :thumbs: :thumbs: :thumbs: :thumbs: :thumbs:
-
Preddy is all ready for your arrival Chris :clap: :clap:
(http://amazingdata.com/mediadata41/Image/fun_cool_offbeat_weird_how-to-keep-an-idiot-busy_20090729130009363.gif)
:confused: :help:
-
but don't worry....it's just Preddy at your door...
(http://28.media.tumblr.com/tumblr_lb01o6tn481qe0eclo1_r8_500.gif)
-
NOW THAT'S A LOT OF SHIT!!!!!!!!!!!
(http://i11.photobucket.com/albums/a195/preddy08/IMG_20130812_220356_504.jpg) (http://s11.photobucket.com/user/preddy08/media/IMG_20130812_220356_504.jpg.html)
-
HOLY CANOLI :lol: :lol: :lol: :lol: :lol:
-
well...
ride report sucka!!!!!!!!!!
-
+1 how is it?
this thread makes me want my quad back :lol:
-
Quad is at the dyno, going riding Saturday. From the ride around Shawn's. neighborhood I think we have a monster
-
$4000 you pay shipping............Peels
-
$4000 you pay shipping............Peels
:clap: :rofl:
how about you just ride it here? :rofl:
-
No Numbers Yet???
-
Sorry, the quad made 65/56 on the dynomite dyno. Runs great on pump gas with no hiccups. The suspension is soft for the MX track I rode, but it was smooth off each jump. The torque is unreal! There was a sand MX track that got me right back into the rhythm.
Needs a little bit of work, OEM parts and minor stuff but it is a runner for sure!
-
how the f**k can it need parts?
randy...we need another meme. :rofl:
-
(http://i.imgflip.com/3a2bk.jpg)
-
Whats the motor build?
-
770cc
5050 cam
FCI intake
CS XX6 exhaust
105 CP piston 11:1
+5mm HR crank
Velohead "Bo port" Stage 2
OEM clutch w/ HD springs
Does a great job, but the MSD Blaster was waaaaaaayyyyyy off according to the tuner. It idles perfect, and power takes off at 4500
-
Whats the motor build?
keep in mind its a dynomite dyno, they read very low. I'd say 12-18% low
-
Whats the motor build?
keep in mind its a dynomite dyno, they read very low. I'd say 12-18% low
ahem. isnt that like tellin a woman you just got outta cold water, when she sees your tiny weenis?
-
Whats the motor build?
keep in mind its a dynomite dyno, they read very low. I'd say 12-18% low
ahem. isnt that like tellin a woman you just got outta cold water, when she sees your tiny weenis?
I'm not sure, thats never happened to me Pealer. Why dont you tell us about it :rofl:
-
:lol:
zing!
-
jerk! lololololol
burned
-
(https://sphotos-a-ord.xx.fbcdn.net/hphotos-prn2/1280871_581151275274270_407701615_n.jpg)
-
it must read WAY low..
my stock bore, stock stroke YFZ 700r made 67HP with a Barker stage 2 head, and 10.5:1 piston (No MSD, just PC5)
way more TQ than mine if I remember right though!
-
Shawn is that stock injector? My 778 build was very similar to this once I swaped to a pinky 565 injector it really jumped in power.
-
So after a TWO year build. Is this quad going to be at LS this. Weekend ?
-
So after a TWO year build. Is this quad going to be at LS this. Weekend ?
the only place it will be in is in alkire's dreams :thumbs: