Sparks Big Core heat shield

Started by tonto13, February 19, 2009, 06:19:12 PM

Previous topic - Next topic

tonto13

Well noone makes what I am looking for so I am trying to make my own. This is a fiberglass heatshield that I am trying, still have to make the standoffs. Any thoughts, tips! This is the first and just seeing if it will work. My questions are how will the fiberglass hold up to the heat in that area? It will not be directly on the pipe it will be about 1/4" of the pipe. Any advice is more than welcome!

MSAWS= My Sh*t Always Works Sometimes!
"99% of life is what you make of it, so if your life sucks, YOU SUCK!!!"
-Mike Muir (aka Tonto)


Livingmylife93

Well you did a nice job constructing it  :thumbs:

But i dont know anything about how it will hold up


poolboytoo

I wonder if you could ceramic coat fiberglass
2008 Raptor 700R
DMC Force 4 duals
Trinity Intake/w K&N
ProTec Airbox Lid
PC-V
22'' Holeshot XCT Rear
23'' Holeshot XCT Front
Full GYT-R Skids
GYT-R Shock Covers
ODI Rogue Grips

BRAD

The fiberglass should hold upto the heat fairly well as long as you dont have it actually resting on the pipe. 
2007 GYTR Raptor
ROCK series skids
Yoshimura RS7
Motoworks Fuel programmer-(Dobeck Style)
Holeshot HD tires

tonto13

I do not think that I could ceramic coat it. My main worry is about the resin's heat tolerance not the fiberglass itself. I do have a few more ideas.
MSAWS= My Sh*t Always Works Sometimes!
"99% of life is what you make of it, so if your life sucks, YOU SUCK!!!"
-Mike Muir (aka Tonto)


Colorado700R

could you spray and bake that shield in VHT paint?  might seal your resin up ???

tonto13

That is what I am going to use to paint the outside of it with, but I think I have found sometning for the inside that will work!
MSAWS= My Sh*t Always Works Sometimes!
"99% of life is what you make of it, so if your life sucks, YOU SUCK!!!"
-Mike Muir (aka Tonto)


preddy08

Why not put heat reflecting tape on the back side? maybe glue some header wrap on the back side?
Just a little 81hp trail bike.


Krandall

both of my ideas were said while I was reading your first post. I know.. when resin burns.. It burns...


I would try coating it in the Ceramic VHT paint and then cover the inside w/ the aluminum tape :)


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

tonto13

Krandall, that is pretty much what I am going to do to it and see how it works. I had to make 2 of them, as both mine and the wifes have Sparks pipes.
MSAWS= My Sh*t Always Works Sometimes!
"99% of life is what you make of it, so if your life sucks, YOU SUCK!!!"
-Mike Muir (aka Tonto)


mustangracer42


tonto13

Just have to make the standoffs, and waiting on the tape to get here. I ended up making 2 of them. The second on has a little more coverage area. Then I will let my tester lose with it. She will let me know if it sucks, shes my wife!!!!
MSAWS= My Sh*t Always Works Sometimes!
"99% of life is what you make of it, so if your life sucks, YOU SUCK!!!"
-Mike Muir (aka Tonto)


mustangracer42

I'm interested in seeing how it holds up for ya.  Any interest in making another and how much if so?


Krandall

Never heard back. How did this end up holding up for you? :thumbs:


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

tonto13

So far it has held up well. I am redoing them out of stainless steel. Sorry for no response, finally found a job again and it has been eating up 6 days out of the week, sucks but it pays the bills! When I get the s/s ones done I will post up pics. Mustang when I post up the pics of the s/s ones and you like it we can talk if you want.
MSAWS= My Sh*t Always Works Sometimes!
"99% of life is what you make of it, so if your life sucks, YOU SUCK!!!"
-Mike Muir (aka Tonto)