Fuel ATV intake and Crankcase Evac Valve Pics

Started by desdak4, June 23, 2008, 06:37:25 PM

Previous topic - Next topic
Print
Go Down Pages1 2
User actions

desdak4

June 23, 2008, 06:37:25 PM Last Edit: June 26, 2008, 06:50:39 AM by desdak4
I thought I would share how I set up my Crankcase valve and Fuel ATV Intake with everyone. So, here ya go.

Jay





'07 Raptor 700 SE / Monster Duals / PC III / FUEL ATV Intake / AC Pro Pegs / Pro Armor Bumper / Pro Armor Grab Bar / G-Force Spacers / G-Force Hubs / 36 Tooth / T-9 BAJAs w/GNCCs / Flexx Bars / Dr. D Reverse Lever / Full Skids / Pro Armor Kill / Kennys CrankCase Valve and more to come I am sure

pj4553

#1
June 23, 2008, 07:34:17 PM
Looks good. I could never run that though. I see too much water.

desdak4

#2
June 23, 2008, 07:40:35 PM
Part of the reason I bought this is I was on a ride and the mud (rare for me) clogged the drain on my airbox and got so much water in the box it overpowered the outerware. This way you have to submerge it to cause a problem and my quad does not go that deep EVER.

Jay
'07 Raptor 700 SE / Monster Duals / PC III / FUEL ATV Intake / AC Pro Pegs / Pro Armor Bumper / Pro Armor Grab Bar / G-Force Spacers / G-Force Hubs / 36 Tooth / T-9 BAJAs w/GNCCs / Flexx Bars / Dr. D Reverse Lever / Full Skids / Pro Armor Kill / Kennys CrankCase Valve and more to come I am sure

pj4553

#3
June 23, 2008, 07:44:42 PM
I hear ya. Let us know how it works out for you.

desdak4

#4
June 23, 2008, 07:52:18 PM
Sure thing, I think my biggest problem will be getting the map right since my state doesn't have a dyno in it.

Jay
'07 Raptor 700 SE / Monster Duals / PC III / FUEL ATV Intake / AC Pro Pegs / Pro Armor Bumper / Pro Armor Grab Bar / G-Force Spacers / G-Force Hubs / 36 Tooth / T-9 BAJAs w/GNCCs / Flexx Bars / Dr. D Reverse Lever / Full Skids / Pro Armor Kill / Kennys CrankCase Valve and more to come I am sure

pj4553

#5
June 23, 2008, 08:02:06 PM
Me neither. I just used one that was close enough  :grin_nod:

desdak4

#6
June 23, 2008, 08:07:53 PM
Yeah, I think I am close now and it should get pretty good after a week of real world tweaking.

Jay
'07 Raptor 700 SE / Monster Duals / PC III / FUEL ATV Intake / AC Pro Pegs / Pro Armor Bumper / Pro Armor Grab Bar / G-Force Spacers / G-Force Hubs / 36 Tooth / T-9 BAJAs w/GNCCs / Flexx Bars / Dr. D Reverse Lever / Full Skids / Pro Armor Kill / Kennys CrankCase Valve and more to come I am sure

Bert

#7
June 25, 2008, 05:22:05 PM
Quote from: desdak4 on June 23, 2008, 06:37:25 PM
I thought I would share how I set up my Crankcase valve and Fuel ATV Intake with everyone. So, here ya go.

Jay


Hey Jay
Do you think an Outerwares is needed on your filter after the CEV?

desdak4

#8
June 25, 2008, 06:01:39 PM
I don't think so as it really doesn't suck anything in.

Jay
'07 Raptor 700 SE / Monster Duals / PC III / FUEL ATV Intake / AC Pro Pegs / Pro Armor Bumper / Pro Armor Grab Bar / G-Force Spacers / G-Force Hubs / 36 Tooth / T-9 BAJAs w/GNCCs / Flexx Bars / Dr. D Reverse Lever / Full Skids / Pro Armor Kill / Kennys CrankCase Valve and more to come I am sure

Bert

#9
June 25, 2008, 06:37:34 PM
That filter looks good Jay  :thumbs:
Hope your mapping comes around

Krandall

#10
June 26, 2008, 07:32:55 AM
Desdak, Where did you get that mini filter for the Crank Case Evac Valve? ???


Looks like a great setup man! :thumbs:  I don't think I could bring myself to run on box.. To much mud/water


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

desdak4

#11
June 26, 2008, 09:24:54 AM
It is a stainless mesh breather that I got at O'Reilly Auto Parts for 13 bucks. The outerware keeps everything out of there unless you submerge your bike and I never get in water that deep as I have seen way to much carnage after sinking one.

Jay
'07 Raptor 700 SE / Monster Duals / PC III / FUEL ATV Intake / AC Pro Pegs / Pro Armor Bumper / Pro Armor Grab Bar / G-Force Spacers / G-Force Hubs / 36 Tooth / T-9 BAJAs w/GNCCs / Flexx Bars / Dr. D Reverse Lever / Full Skids / Pro Armor Kill / Kennys CrankCase Valve and more to come I am sure

Krandall

#12
June 26, 2008, 09:29:47 AM
Quote from: desdak4 on June 26, 2008, 09:24:54 AM
It is a stainless mesh breather that I got at O'Reilly Auto Parts for 13 bucks. The outerware keeps everything out of there unless you submerge your bike and I never get in water that deep as I have seen way to much carnage after sinking one.

Jay


I watched my bud almost 2 years ago sink his 4 month old LTR in a pond.. F*CKIN Hillarious!!!!  I think I have pics somewhere.....


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

desdak4

#13
June 26, 2008, 09:44:53 AM
O yeah, it's funny as hell. When it's somebody else :D :thumbs:

Jay
'07 Raptor 700 SE / Monster Duals / PC III / FUEL ATV Intake / AC Pro Pegs / Pro Armor Bumper / Pro Armor Grab Bar / G-Force Spacers / G-Force Hubs / 36 Tooth / T-9 BAJAs w/GNCCs / Flexx Bars / Dr. D Reverse Lever / Full Skids / Pro Armor Kill / Kennys CrankCase Valve and more to come I am sure

preddy08

#14
June 26, 2008, 09:46:07 AM
Quote from: desdak4 on June 26, 2008, 09:44:53 AM
O yeah, it's funny as hell. When it's somebody else :D :thumbs:

Jay

Like the pic in my sig? My buddy was laughing his ass off :mad: :mad:
Just a little 81hp trail bike.

Print
Go Up Pages1 2
User actions