Overheating

Started by anthony81, August 09, 2010, 06:40:47 AM

Previous topic - Next topic

anthony81

I didnt know if anyone else had a similar problem. Ever since i put the big bore kit on the fan runs all the time and about 3 drag races the temp light comes on. Idk if i need a bigger radiator or bigger fan ???
08 Raptor 700 SE
PC III
Youshimura exhaust
Pro Design intake & K&N filter
Mega Cycle X1 cam
12.5:1 JE piston
Trinity Racing 105.5 mill big bore
Hot Rods 5 mill stroker crank
15 tooth front

Mad Dog

Before you start throwing money at it I would check your fuel map/settings, too little fuel can make a motor run hot and even if it runs ok it can still be lean.


anthony81

I was going to check my plug today but i know i need a pc3 because i have a DMC and i think the only map in it is for a filter and pipe and as far as i know you cant get in there and load a different map on the DMC controller.
08 Raptor 700 SE
PC III
Youshimura exhaust
Pro Design intake & K&N filter
Mega Cycle X1 cam
12.5:1 JE piston
Trinity Racing 105.5 mill big bore
Hot Rods 5 mill stroker crank
15 tooth front

Krandall

I'd stop running it right now. Is the DMC controller a dobeck style? Dials on it?


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

Mad Dog

The DMC is dobeck type, no maps but you can adjust the settings.



anthony81

No it doesnt have dials on it just three buttons on the front. Mode + -
08 Raptor 700 SE
PC III
Youshimura exhaust
Pro Design intake & K&N filter
Mega Cycle X1 cam
12.5:1 JE piston
Trinity Racing 105.5 mill big bore
Hot Rods 5 mill stroker crank
15 tooth front

anthony81

Thats the one i have. I guess i will order a pc3 this week. Do you know of anyone to get it from for a good price. I seen them at KB for 310 or 315 i think.
08 Raptor 700 SE
PC III
Youshimura exhaust
Pro Design intake & K&N filter
Mega Cycle X1 cam
12.5:1 JE piston
Trinity Racing 105.5 mill big bore
Hot Rods 5 mill stroker crank
15 tooth front

Mad Dog

You can tune that DMC to give more fuel.

anthony81

I have the main on the highest setting now. Is that what you mean or is there another way to do it?
08 Raptor 700 SE
PC III
Youshimura exhaust
Pro Design intake & K&N filter
Mega Cycle X1 cam
12.5:1 JE piston
Trinity Racing 105.5 mill big bore
Hot Rods 5 mill stroker crank
15 tooth front

vAtO

#9
Quote from: anthony81 on August 09, 2010, 08:22:31 AM
Thats the one i have. I guess i will order a pc3 this week. Do you know of anyone to get it from for a good price. I seen them at KB for 310 or 315 i think.

U can get the PC5 for that price too, u will have the advantage of put it the autotune add on, and all the PC3 map u can convert to PC5 with the PC5 software, but maybe u can get an used PC3 for a good price is up to u good luck

here is one of the site sponsors and have a good rep

http://www.tqsatv.com/proddetail.php?prod=power-commander-5-pc5-pcv     only the PC5
http://www.tqsatv.com/proddetail.php?prod=PCV-AUTOTUNE-BUNDLE-KIT     this whit the autotune add on
http://www.tqsatv.com/proddetail.php?prod=power-commander-3-pc3           only the PC3


and if u have a doubth of the PC5, it will work whit all EFI Raptors, 2006 thru 2011
CP piston 12.1
RE CNC head port
Web 4 cam
KW spring kit
+1 Ferrea Valves
FCI intake K&N
EVAC Valve
PCV w/Autotune
+2.5 TB
Iridium
15T

Krandall

www.fuelmotousa.com

The guy that runs it, his name is Jamie. Give them a call. $259 shipped to your door w/ a map loaded on it for your mods. :)


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

anthony81

Thanks for all the help guys. I hope that will help my overheating problem.
08 Raptor 700 SE
PC III
Youshimura exhaust
Pro Design intake & K&N filter
Mega Cycle X1 cam
12.5:1 JE piston
Trinity Racing 105.5 mill big bore
Hot Rods 5 mill stroker crank
15 tooth front

preddy08

Quote from: anthony81 on August 09, 2010, 02:44:09 PM
Thanks for all the help guys. I hope that will help my overheating problem.

Yea, you should not be having any issues. I've had a well built motor for 3 years now and have never seen my over heat light. Even 1 gear putting all the way across Little Sahara with a injured buddy on the back in 90 degree weather.
Just a little 81hp trail bike.


anthony81

Im trying to get it taken care of before we go back to little sahara in september. I just put a +6 swingarm on it this weekend and it wont hook up with haulers in the sand we have here but hopfully it will in oklahoma.
08 Raptor 700 SE
PC III
Youshimura exhaust
Pro Design intake & K&N filter
Mega Cycle X1 cam
12.5:1 JE piston
Trinity Racing 105.5 mill big bore
Hot Rods 5 mill stroker crank
15 tooth front

anthony81

I got the pc3 put on and a richer map put in it but my radiator wont suck the coolant back in from the overflow. I already changed the radiator cap out but it didnt help. Any suggestions? ???
08 Raptor 700 SE
PC III
Youshimura exhaust
Pro Design intake & K&N filter
Mega Cycle X1 cam
12.5:1 JE piston
Trinity Racing 105.5 mill big bore
Hot Rods 5 mill stroker crank
15 tooth front