Need help badly thanks

[Krandall]

Yea, I just re-went through the pics I have from my HID install. Looks like I only have 2 wires.. Not sure why you'd have 3... doing more looking.

[Spider/Paleface513]

No the stock wiring harness from lights to first plug is 3 wires. The ballist only has two at each end but I don't know which is ground or negative or to even test the ballist.

[Spider/Paleface513]

The smaller wire come from stock harrness and the fatter ones go to the lights?

[Spider/Paleface513]

I wish these lights came with real instrustions. They're for a car or motor cycle with a relay picture I have no relay just unlabled wires. How's a dummy like me know how to do it. This sucks there should be a inlet outlit Markings.  someone show me there's.

[Spartan]

Ok let's double check your routing...wires from bulb go to the ballast, and from the ballast there's a 2 prong plug (integrated, not separate) then that goes to the stock headlight plug which is plugged into the factory harness. Did you wire black to black and red on HID harness to green on factory plug?

[Spartan]

If you'll be down here in 2 weeks, just wrap it all up for now and bring it all with you, I'll come up and help get that sorted. It's really simple but it can be confusing the first time you mess with HID systems.

[Spider/Paleface513]

 I had to cut all the wires nothing plugged to nothin but about a foot of extra wire or some thing the yellow wire and green wire both have power after I hook them up I can't get nothing thru to the other side are my ballist bad? Did I blow the bulbs gating the box around? On my ballast there's a big box and a little box which one should electricty run threw first?

[Spartan]

Umm you shouldn't have had to cut the bulb to box wires. And one end of the plug that goes from the box to the headlight plug should've plugged into the ballast.

[Spider/Paleface513]

Had ballist backwards I now have lights haha thanks Aaron pat

[Krandall]

good to hear. bright suckers arent they!!!

[Spider/Paleface513]

Yeah they are I'd like to seen em lastnight cause I have pretty dark blue head light covers. It blocked over 1/3 of stock lights.

[Spartan]

Glad to see you got it done. After the first time it's easy once you understand how the routing goes

[Colorado700R]

[Spider/Paleface513]

I'm redo later(anotherday) when front plastics off so I can mount ballist in other places later maybe safer spot. But thanks everyone yeah next time will got way better.

[Colorado700R]

my ballasts are mounted on each side of the radiator.  there ziptied in position.  Never had and issue, and they work good there.