how do you set the timing?

[Livingmylife93]

Whick mark do you use on the flywheel?

And how do you line up the cam gear?

[Spartan]

You line up the I mark on the flywheel (in the inspection cover hole) and the cam sprocket has a dash on it that you line up with the top of the head.

[txredxj]

there is a raised line on the top of the head you line up the dash to. also on modded raptor forum ther is a how to section with a video to install a cam

[Spartan]

To add to my original post, you line up the cam gear by turning the motor over by hand using the flywheel nut accessible under the inspection cover (the big one, takes a 14mm allen head).

[Livingmylife93]

spunds good guys, thanks.

There is only one mark on the flywheel right? I know some have like a I then 2 more

[Krandall]

spunds good guys, thanks.

There is only one mark on the flywheel right? I know some have like a I then 2 more

I believe there are 2 (could be 3)

ones an I and the other is an H

make sure to line up w/ the I

[Livingmylife93]

alright cool. thanks!