Mini-Winter Build

[1badazz_700r]

sorry to hear about this. I would highly recommend a +5 hotrods. If not you can have my very lowhour stock crank for shipping fee's. I also have a brand new bearing for inside the one case

[anthony81]

Have Krandall you found someone to rebuild it yet? If not i am positive i can do it just dont know what state you live in. Im in Texas but me and my buddy do all our own work. I already had to replace tranny gears and then broke the cases again and replaced the crank. Idk how much you can get a crank for but i paid 315 for mine at my local guy. And he can get all the OEM tranny parts for cheap or i go to XtremePowersports.com. Let me know what you think.

[Krandall]

Thanks Anthony, Tonto and 4gunz offered to help me out w/ my motor I got everything packaged up yesterday.
I have a "new" stock crank on the way as well. Kamakazi hooked me up BIG time!

It's so awesome to have guys like you on this site. Without you, all this is not possible! Thanks for everything guys!


And Badazz.. I'll hit you up if I need that bearing!

[anthony81]

No problem. If you need any help with anything else hit me up. Maybe you will have it back together soon.

[anthony81]

I was always worried about the cam sprocket bolts coming out and getting in to the cases and tearing everything up so i locktight everything that i think could come loose and cause damage.

[Krandall]

motor was packaged up and shipped tonight

[Spartan]

Good. Hope it gets back to you better than before 

[VelociRaptor]

You ship it like when you shipped it to me way back when?

[Krandall]

for the most part yes. took a few more precautionaries this time around. But all and all. I did a "roll" test lol.

rolled the rubbermade tote around my living room floor. didn't move at all inside. should be good to go!

[VelociRaptor]

Cant beat the Rubbermade, I ship em all that way.

[Alkire193]

I prefer the "stair" test. Also can do it with your driveway if you live on a hill. Just roll it down and see what happens. Sad we have to resort to these methods because shipping companies  cant read Fragile - this side UP

[Krandall]

Motor arrived @ Gunz place on Tuesday.

Head arrived @ RE yesterday.




Just got off the phone w/ John. He's taking care of my cam. But he noticed that the intake valves were bent. Looks like the piston gave them a light tap. Not horrible, but bad enough. Getting new valves thrown in.

He said he also noticed that the intake port where the divider is. That there is 2 small cracks. 1 - 1"16" long and 1 about 1/8" long.

Doesn't think it's critical, but something to be aware of.


cripes. 

[preddy08]

Damn Randi, when you FERK something up you dont mess around

[Krandall]

I guess..


Go big or go home.. That's the saying right?

[Alkire193]

I guess..


Go big or go home.. That's the saying right?

My VW did the same thing before I went overseas  . Its gonna be ok. What do you need? Lot of new heads being sold right now