Cost Vs. Result

[fireman5166]

well here goes


barkers                                  $750
pcIII                                     $250
trf intake                               $125
evac valve                             $75
dynoteck ignition                     $219 got a good deal
rocket factory dyno and tune    $80
hot cams 3                             $175


I hit 63hp and 50 tq I am happy but want more. 

[Colorado700R]

nice build for $1674

[SprinterX]

Here's mine then;

Motoworks pipe with a GYTR header  $400
TQS 11.5 piston  $230
FCI intake  $220
Kennies +3 TB  Free
Kennies evac valve  $65
HC2 (used)  $85
PC5 with A/T  $500
Dyna Programable (TRF used) $200

Total engine work so far  $1700

Dyno tuned at Craz-E-Dealz $65

57HP, 47T (52hp @ 5600, peak @ 7200, nice curve)

I have +2mm valves, KW springs and an X2 cam waiting for some head work.
Also, a great set of Barker duals I just won. SCORE

Anyone have an idea what HP/T numbers with a mild port, my X2 and the duals?

[Colorado700R]

I would think 65-68ish would be in reach. (Dyno dependant ofcorse)

Nice build and thanks for posting!

[MO RAPTOR 700]

well here goes


barkers                                  $750
pcIII                                     $250
trf intake                               $125
evac valve                             $75
dynoteck ignition                     $219 got a good deal
rocket factory dyno and tune    $80
hot cams 3                             $175


I hit 63hp and 50 tq I am happy but want more.  

Thats a fairly similar build to mine and I was hoping for 65+ Hp so that gives me hope for 65+. I have a PCV, +3 TB, ported head, and 11.5:1 CP tech in conjunction to want you have. I dont have the evac though.  Thanks

[SprinterX]

well here goes


barkers                                  $750
pcIII                                     $250
trf intake                               $125
evac valve                             $75
dynoteck ignition                     $219 got a good deal
rocket factory dyno and tune    $80
hot cams 3                             $175


I hit 63hp and 50 tq I am happy but want more. 

WOW, those are some stout numbers for a stock 9:1 compression engine

[fireman5166]

well here goes


barkers                                  $750
pcIII                                     $250
trf intake                               $125
evac valve                             $75
dynoteck ignition                     $219 got a good deal
rocket factory dyno and tune    $80
hot cams 3                             $175


I hit 63hp and 50 tq I am happy but want more.  

Thats a fairly similar build to mine and I was hoping for 65+ Hp so that gives me hope for 65+. I have a PCV, +3 TB, ported head, and 11.5:1 CP tech in conjunction to want you have. I dont have the evac though.  Thanks

yea you should have no problem hitting that mark.  you have the mods I want to do.  Jayson at rocket factory said that if I did what you have done I would be high 68 69 maybe 70 hp.

[MO RAPTOR 700]

yea you should have no problem hitting that mark.  you have the mods I want to do.  Jayson at rocket factory said that if I did what you have done I would be high 68 69 maybe 70 hp.
[/quote]

Jason is the one that installed my HCIII and ported the head and I also got my Big 3 from him. I would be on cloud 9 if I hit the 70 hp. 

[funyun]

PCV ~ $285
Intake adaptor + K&N Filter - 50$
stock 07 cams - $45
Full HMF Sport exhaust - $165

$545 spent so far on performance


Might be getting dyno tune and testing some of my stuff vs barkers/hefe parts next week

[fireman5166]

yea you should have no problem hitting that mark.  you have the mods I want to do.  Jayson at rocket factory said that if I did what you have done I would be high 68 69 maybe 70 hp.

Jason is the one that installed my HCIII and ported the head and I also got my Big 3 from him. I would be on cloud 9 if I hit the 70 hp. 
[/quote]

nice, Jayson does all my work.  so where u at? are u close to trf. I am by Sacramento ca.

[fireman5166]

well here goes


barkers                                  $750
pcIII                                     $250
trf intake                               $125
evac valve                             $75
dynoteck ignition                     $219 got a good deal
rocket factory dyno and tune    $80
hot cams 3                             $175


I hit 63hp and 50 tq I am happy but want more. 

WOW, those are some stout numbers for a stock 9:1 compression engine

yea I was shocked when I hit them numbers on the dyno. Jayson said that my bike is the highest hp bike he has seen on his dyno with what mods I have done to my bike. well whatever he is doing to them works I am happy 

[PDX Raptor]

TRF's dyno reads about 7hp higher than others. I had a SS/SB motor that dyno'd 69hp on that dyno and then 63 on another. A friend of mine dyno'd at 75hp and then 67hp on another dyno. Not trying to rain on your parade, just thought you would want to know.

[MO RAPTOR 700]

nice, Jayson does all my work.  so where u at? are u close to trf. I am by Sacramento ca.
[/quote]

I'm from the big City of Bloomsdale, MO population 429. But really just south of St. Louis, MO.

[Colorado700R]

[Raginraptor]

My New build:

Barker duals- $645
PcV- $290
Dyna (prog) $269
+3tb $135 (going to a 54mm tb soon)
+2 head $750
Hdd 5050 cam $300
Cp 12.1 piston $185
Fci intake $219

Grand total $2793
Hoping for 70+hp