What do you think would be a good price?

[BLU700R]

So this guy named Joe who runs rossier engineering is going to do a piston on my rappy and is charging me around 700 bucks with everything said and done! thats me just taking the rappy in and then getting it back with the piston and gasket set and dynoed all for about 680 what do you guys think?

[Bert]

Sounds great if you've got more $$$ than time. 
Piston swap doesn't require remapping right?  If your Rappy hasn't been on a dyno yet at least you'll have a good tune. 

For that price I'd want more from the deal, IMO

[Sandeater]

Thats about right...depending on shop rates.....

$150-200 for piston
$200-250 for dyno tune (dynojet with tuning link software?)
$50-75 for gasket set

3-4 hours labor @ $75/hr = 300

[Bert]

Fuel milage, who needs that  - Kenny's +2 TB & piston. A trip to the dyno deserves more mods

[Krandall]

since you're that far into it, I think a +2 TB is worth it.

[BLU700R]

how much is a +2 TB?

[ThisGuyAlex]

up to you but i wouldn't waste the extra $$$ on the dyno time until you do something really major.....300 or so bux is a lot of cash for a piece of paper.....besides isn't what you feel opening it up and grinning a better indicator anyway? 

[BLU700R]

Ok so shes all done and only pushing 53 HP what are you guys pushing with these mods that just doesnt seem right I wanna go faster

[Bert]

Hey BLU

What about a +2 TB from Kenny & a DynaTek w/ custom curve?

[thatguy]

what do you got for a intake??and pick up some duals besides dmc's sonce your going internal and add a cam

[Sand84]

Ok so shes all done and only pushing 53 HP what are you guys pushing with these mods that just doesnt seem right I wanna go faster

What Mods u have?  53 IS not a bad number

[BLU700R]

Hey BLU

What about a +2 TB from Kenny & a DynaTek w/ custom curve?

what do you got for a intake??and pick up some duals besides dmc's sonce your going internal and add a cam

I have the PCIII EFI controller already! Also i have the GYTR intake and Full GYTR pipe and header. Am really looking at getting doolz but currently dont have the money for that I also have the HCII and after all of that shes only got 53 HP is that right?

[Sand84]

Hey BLU

What about a +2 TB from Kenny & a DynaTek w/ custom curve?

what do you got for a intake??and pick up some duals besides dmc's sonce your going internal and add a cam

I have the PCIII EFI controller already! Also i have the GYTR intake and Full GYTR pipe and header. Am really looking at getting doolz but currently dont have the money for that I also have the HCII and after all of that shes only got 53 HP is that right?

For the Mods u have I think 53 HP is pretty damn good....
With mods in my sig and a rocky AF I got 53 Hp..  Dyno Operator said He could see 58 Hp with a better AF..  I just wanted a Baseline.   And $70 an hour for dyno time gets costly..  When your not gonna be running that map..   

[sandaddy]

Looking at your mods, I`d think you should be happy with 53....I would say actually, his dyno may even be a little generous. Sorry, I know that`s not what you want to hear....but, the important thing is....how does it feel to you ?  Better, more power ?... and the +2 TB from KDS is around $159.00, last time I checked. Call Kenny at KDS and he`ll help you with other thoughts on how to increase your Ponies.....Good Luck..............Sandaddy  

[BLU700R]

Really i thought with my mods i would have had more Oh well thats what i get for thinking! She moves very well until about mid 5th gear then she feels sloppy but i mean i am pretty satisfied How much more HP is the +2 TB ? and then i would have to remap again i have the damndest time figuring that thing out