All i want is a straight answer

[Livingmylife93]

Where is the idle adjustment on a stock raptor lol

[Colorado700R]

shifter side spring loaded thumb/phillps head screw..


make sure the bike is off of fast idle/warmup cycle before adjusting

[Ranger]

That's the cold idle adjustment...the regular idle adjustment is on the side of the throttle plate, has a 10mm locknut and a flat screw adjuster in the middle...turn in to go higher in RPMs, turn out to go lower.

[DL700]

The screw with the SPRING, is an AIR BLEED/bypass.... which is used for small idle speed adjustemnts,,, there is also an throttle plate stop screw which is your main primary idle speed adjustment....this should only be adjusted if the AIR BLEED does not perform the required adjustment to idle speed... when the throttle body is changed or modified this will be the first adjustment necessary

[Colorado700R]

thanks for the clarification Daniel

[DL700]

if you encounter irratic idle speeds try and backout the throttle plate stop screw then readjust the air bleed to get the correct idle speed

[Livingmylife93]

thanks guys