Winter Build - Research and Progress

Started by Alkire193, October 30, 2009, 12:28:47 AM

Previous topic - Next topic

Alkire193

Quick recap -

This was a 686cc, all the sudden a 727cc, which before it even got put together became a hastily put together 770cc. Now that she has been ridden a few times and a few bells and whistles worked out, I need to gather some information and get some advice. As I gain information I will update this posting, however anyone with information to throw out there for consideration, I welcome it.

Since I will be overseas as of November 25th, 2009 I will be limited as to how fast I can build my bike so please understand this will be a slow and steady thread which will hopefully have lots of information and comparisons of parts applied to larger CC quads. Thank you all  in advance for your help!

Currently:

13:1 105mm CP piston
+5mm Hot Rods Crankshaft
+3 KDS Throttle Body
FCI Intake w/ airbox
Blacked out (ceramic coated) Barker Duals
Power Commander 5 w/ Autotune
Dynatek Programmable Ignition (Curve 2)
OEM clutch w/ Ron Wood Springs
Stage 2 KDS CNC porting
Ferrera Springs, Retainers, Valves
RJ Cam
+4" Durablue Axle
+2" Wicked A-arms
+2 Tie Rods (Ebay brand)
Turner CR HI 1-1/8" bars
+2" Rox Anti-vibe Risers
GPR4 "Remote" Steer Stabilizer
ITP 11x9 rear wheels
OEM front wheels
Smart Chain II (self-lubing)
Sidewinder 15/36 Sprockets (Titanium II's)
+4" Lonestar Swingarm (Black)
Quadtech "Hump" seat (BLACK, Black, black)
SPAL Fan
"Shortie" ASV (Red) levers

Considerations:

Direct Drive Lock out Clutch Kit
Sleeve (Jug) fit to piston (Brand?)
Cylinder Decking (possible +6 crank)
Hiper Dual Bead locker front and rear wheels (Size?)
New +2.25" tie rods (Brand?)
Fox EVO Floats
Fox Evo Float Rear shock
New front and rear plastics
50mm Throttle Body
Larger Injector
IMS fuel tank
Frame reconstruction project 2010 (Massive Undertaking) Gussests and re-enforced stress points
New cases (tranny failure damage, unrepairable)
New bearings....everywhere!
New Hub nut
New foot pegs (triple layer -> PRO ARMOR)
Block Off Plate
OMI Greasable Stem Mount
+2 Houser Anti-vibe steering stem


Powder Coating:

Frame (Black Cherry Red)
Cases/covers (Black) Black Cherry Highlights
Nerfs (Black)
Netting (Black Cherry) if possible
Bars Anodized (Black Cherry)
Hubs (Black Cherry)
Left/Right Knuckles (Black)


As I find more information and make final decisions ill change this post. Thank you everyone for your help!



Purchased:

+2.25" Houser Slicast MGC LT A-arms (Black) Updated - 11/27/2009
+2.25 Front Braided Steel Front Brake Lines (Black) Updated - 11/27/2009
New front knuckles (Left and Right) Updated - 11/27/2009