What did you do to your Raptor today? v2

Started by Krandall, October 02, 2009, 01:00:01 PM

Previous topic - Next topic
Print
Go Down Pages 1 ... 29 30 31 32 33 ... 38
User actions

MORAPTOR700

#450
March 28, 2011, 08:25:38 AM
Quote from: Spartan727 on March 27, 2011, 05:53:22 PM
Get some YFZ shocks...

I'm not loaded like you Pat. Can't afford YFZ shocks gota drop it the poor mans way.  :rofl:
2007 Raptor 700SE    Black/Orange

dragonz

#451
March 28, 2011, 08:45:42 AM
Quote from: MORAPTOR700 on March 28, 2011, 08:25:38 AM
Quote from: Spartan727 on March 27, 2011, 05:53:22 PM
Get some YFZ shocks...

I'm not loaded like you Pat. Can't afford YFZ shocks gota drop it the poor mans way.  :rofl:
what is that? Cut an inch or 2 off da springs bro............??? LOL
2003 Raptor 660LE
719cc with Kenz 13.5:1 piston
X-4 cam & no decomp
39mm FCR's
HV ported head
Ferrea SS Valves
CT Sonic Exhaust
GYTR Clutch

ASR +3+1 A-Arms & Works Tripple Rates
450 Front Calipers
+2 Extended Swingarm
G-Force Axle & Hubs.
Pro Armour Skid Plate
Tusk Nerfs


Gonna be a fun ride now!

Peelz

#452
March 28, 2011, 09:15:45 AM
Quote from: dragonz on March 28, 2011, 08:45:42 AM
Quote from: MORAPTOR700 on March 28, 2011, 08:25:38 AM
Quote from: Spartan727 on March 27, 2011, 05:53:22 PM
Get some YFZ shocks...

I'm not loaded like you Pat. Can't afford YFZ shocks gota drop it the poor mans way.  :rofl:
what is that? Cut an inch or 2 off da springs bro............??? LOL

genius from down under :lol:
Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"

dragonz

#453
March 28, 2011, 09:26:07 AM
Quote from: PeelsSE2 on March 28, 2011, 09:15:45 AM
Quote from: dragonz on March 28, 2011, 08:45:42 AM
Quote from: MORAPTOR700 on March 28, 2011, 08:25:38 AM
Quote from: Spartan727 on March 27, 2011, 05:53:22 PM
Get some YFZ shocks...

I'm not loaded like you Pat. Can't afford YFZ shocks gota drop it the poor mans way.  :rofl:
what is that? Cut an inch or 2 off da springs bro............??? LOL

genius from down under :lol:
one way to up the spring rate & lower all in one foul swoop................
2003 Raptor 660LE
719cc with Kenz 13.5:1 piston
X-4 cam & no decomp
39mm FCR's
HV ported head
Ferrea SS Valves
CT Sonic Exhaust
GYTR Clutch

ASR +3+1 A-Arms & Works Tripple Rates
450 Front Calipers
+2 Extended Swingarm
G-Force Axle & Hubs.
Pro Armour Skid Plate
Tusk Nerfs


Gonna be a fun ride now!

rappyfreak

#454
March 28, 2011, 10:22:09 AM
Quote from: dragonz on March 28, 2011, 07:23:58 AM
Quote from: PeelsSE2 on March 28, 2011, 06:44:30 AM
took out the cam.... dont need it anyways, I dont ride it :lol: 

cleaned filter and prefilter. they were CAKED with sand still from LS rally
you sure it was sand???
& if it was, why was it so well stuck there  :confused:

Just bring some toilet paper next time peels!
'06 Raptor 700: Yoshi RS-7 full, PCV, Pro Design Foam, EHS lid, Flexx bars, 2" Rox a/v risers, ASV C/5 levers, Powermadds, CCP, HDUSA i3500 +2 a-arms, Rap 700 SE front shocks redone by Wiig, Fox Podium X rear, DWT Drift rear and Hiper beadlocks, Pro Armor XC nerfs, Race grab bar, Tag Agro bumper/chassis skid, PRM 0.25" swinger skid

My name is Iñigo Montoya, you killed my father, prepare to die!

MORAPTOR700

#455
March 28, 2011, 11:05:24 AM
Quote from: dragonz on March 28, 2011, 09:26:07 AM
Quote from: PeelsSE2 on March 28, 2011, 09:15:45 AM
Quote from: dragonz on March 28, 2011, 08:45:42 AM
Quote from: MORAPTOR700 on March 28, 2011, 08:25:38 AM
Quote from: Spartan727 on March 27, 2011, 05:53:22 PM
Get some YFZ shocks...

I'm not loaded like you Pat. Can't afford YFZ shocks gota drop it the poor mans way.  :rofl:
what is that? Cut an inch or 2 off da springs bro............??? LOL

genius from down under :lol:
one way to up the spring rate & lower all in one foul swoop................

Dam this got blowed way out of porportion.   ???  No I was thinking about using these for the front.
http://www.crjperformance.com/loweringkits.html
2007 Raptor 700SE    Black/Orange

dragonz

#456
March 28, 2011, 01:01:42 PM
Quote from: MORAPTOR700 on March 28, 2011, 11:05:24 AM
Dam this got blowed way out of porportion.   ???  No I was thinking about using these for the front.
http://www.crjperformance.com/loweringkits.html
they work fine if you don't jump the quad at all, but do have limitations if you do.
Are you any good with a drill & hacksaw, or have access to an engineering shop?
If you are (or do) send me a pm, & i'll draw something up for you.
oh, 1 other thing, you have to be able to measure & work in metric............. :-)
2003 Raptor 660LE
719cc with Kenz 13.5:1 piston
X-4 cam & no decomp
39mm FCR's
HV ported head
Ferrea SS Valves
CT Sonic Exhaust
GYTR Clutch

ASR +3+1 A-Arms & Works Tripple Rates
450 Front Calipers
+2 Extended Swingarm
G-Force Axle & Hubs.
Pro Armour Skid Plate
Tusk Nerfs


Gonna be a fun ride now!

MORAPTOR700

#457
March 28, 2011, 04:36:05 PM
Quote from: dragonz on March 28, 2011, 01:01:42 PM
Quote from: MORAPTOR700 on March 28, 2011, 11:05:24 AM
Dam this got blowed way out of porportion.   ???  No I was thinking about using these for the front.
http://www.crjperformance.com/loweringkits.html
they work fine if you don't jump the quad at all, but do have limitations if you do.
Are you any good with a drill & hacksaw, or have access to an engineering shop?
If you are (or do) send me a pm, & i'll draw something up for you.
oh, 1 other thing, you have to be able to measure & work in metric............. :-)

Got a complete machine shop at my place of work and yes I can run them. Metric is not a problem either send me a pm of what you got my friend. Thanks Tony
2007 Raptor 700SE    Black/Orange

Bert

#458
March 29, 2011, 07:18:15 AM
mx lowering kit from ebay. doesn't lower as much as CRJ kit. That's why I have this & its new. Lol. wanted it lower & CRJ worked so...

dragonz

#459
March 29, 2011, 06:22:45 PM
Quote from: MORAPTOR700 on March 28, 2011, 04:36:05 PM
Quote from: dragonz on March 28, 2011, 01:01:42 PM
Quote from: MORAPTOR700 on March 28, 2011, 11:05:24 AM
Dam this got blowed way out of porportion.   ???  No I was thinking about using these for the front.
http://www.crjperformance.com/loweringkits.html
they work fine if you don't jump the quad at all, but do have limitations if you do.
Are you any good with a drill & hacksaw, or have access to an engineering shop?
If you are (or do) send me a pm, & i'll draw something up for you.
oh, 1 other thing, you have to be able to measure & work in metric............. :-)

Got a complete machine shop at my place of work and yes I can run them. Metric is not a problem either send me a pm of what you got my friend. Thanks Tony

Tony, measure the distance between the top mount bolt holes for the shocks on your frame, & the diameter of the holes, & the diameter of the tubing.
PM to me, & I'll draw it up for you.
2003 Raptor 660LE
719cc with Kenz 13.5:1 piston
X-4 cam & no decomp
39mm FCR's
HV ported head
Ferrea SS Valves
CT Sonic Exhaust
GYTR Clutch

ASR +3+1 A-Arms & Works Tripple Rates
450 Front Calipers
+2 Extended Swingarm
G-Force Axle & Hubs.
Pro Armour Skid Plate
Tusk Nerfs


Gonna be a fun ride now!

Mad Dog

#460
March 29, 2011, 06:25:35 PM
Nothing.

Krandall

#461
March 30, 2011, 12:31:04 PM
thank you for keeping us updated MD.


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

MORAPTOR700

#462
March 30, 2011, 04:30:43 PM
Quote from: dragonz on March 29, 2011, 06:22:45 PM
Quote from: MORAPTOR700 on March 28, 2011, 04:36:05 PM
Quote from: dragonz on March 28, 2011, 01:01:42 PM
Quote from: MORAPTOR700 on March 28, 2011, 11:05:24 AM
Dam this got blowed way out of porportion.   ???  No I was thinking about using these for the front.
http://www.crjperformance.com/loweringkits.html
they work fine if you don't jump the quad at all, but do have limitations if you do.
Are you any good with a drill & hacksaw, or have access to an engineering shop?
If you are (or do) send me a pm, & i'll draw something up for you.
oh, 1 other thing, you have to be able to measure & work in metric............. :-)

Got a complete machine shop at my place of work and yes I can run them. Metric is not a problem either send me a pm of what you got my friend. Thanks Tony

Tony, measure the distance between the top mount bolt holes for the shocks on your frame, & the diameter of the holes, & the diameter of the tubing.
PM to me, & I'll draw it up for you.

PM sent back to you dragon       Thanks
2007 Raptor 700SE    Black/Orange

Out Back Welding

#463
March 30, 2011, 05:25:20 PM
Adjusted the air pressure on the tires.

Johny_Ringo

#464
March 30, 2011, 07:58:22 PM
finally got my plastics changed out
2006 raptor 700
Pro design intake
PC5
DMC force 4 ceramic coated black headers
Tusk nerf bars
Victory bumper
HID lights
Print
Go Up Pages 1 ... 29 30 31 32 33 ... 38
User actions