Blue LED's for the SE2

[Peelz]

Keep an eye out for deals on these for me guys. There are a ton of them out there. Most are waaay too expensive for what you get.

Looking to spend under $40. 

[Blair]

http://cgi.ebay.ca/2x-Blue-Car-24-LED-Strip-Light-Lamp-Waterproof-Flexible_W0QQitemZ260447009002QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item3ca3d9f8ea&_trksid=p3286.c0.m14

is this what you were looking for?

[Peelz]

yeah not bad. 

[Headrope]

Contact my buddy at flipflopled.com and tell him Jonathan sent you. He can get just about anything you can dream up or will make it.
His web site is primitive but don't let it fool you. He knows LEDs not HTML. 
Dude has been working the swap meet circuit on the West Coast for several years and even gets invited to Hot August Nights in Reno. He'll hook you up.

[Peelz]

will do, thanks headrope. 

[Peelz]

No offense, my friend. But that is still a bit too expensive for how many you get. Thanks for the idea though.

[NaturalRaptor]

I bought the flexible LED strips at http://www.oznium.com/
Build your own kit here.

http://www.oznium.com/led-flex-strips

[Krandall]

Oznium makes awesome stuff. And they have amazing customer service.

[Peelz]

THanks Nat, Randy.

Looking at that one too. I found a place on the bay that sells 10mm pre wired LED's. 10 bucks for 24. Each LED is wired with a resistor, and two leads. More work for me, but the price is right. you get a 100 for 20 bucks. ANd standard led size is 5mm, these are bigger and brighter.

ebay blocked at work, or I would post a link nazis

[NaturalRaptor]

I bought 4 of the 4.7 inch ones and mounted them under the fenders. Also one of the 9.5 inch for under the hood. They are wired with several feet of slack and that is all I used. Since the draw is so little I did not even use a relay, just straight from the positive on the battery to the switch. The LED strips also come with the exact size piece of 3M double sticky tape. And they are very bright too. Good luck with the decision.

Matt

[Blair]

nat... put pictures of that up... i would like to see....