Yz125 reeds, how do these look?

[Nick]

Hey so i took out the reed cage, pretty simple, but the reeds look ok to me, i don't see any gaps, cracks, bends or anything that looks off, they don't look stock either  are they carbon fiber ?
here are the pics.

[Livingmylife93]

look fine to me... 

[Krandall]

they are carbon fiber for sure. They look pretty good man

[Nick]

ok,so i'm guessing the carb needs to be cleaned.
It's bogging down in 5th gear bad to where it almost dies, but then when you slow down it gets up and going again. Lower gears are decent, a little boggy once in a while.
Also I need to change that seal behind the front sprocket cuz it's still leaking.

[Livingmylife93]

ok,so i'm guessing the carb needs to be cleaned.
It's bogging down in 5th gear bad to where it almost dies, but then when you slow down it gets up and going again. Lower gears are decent, a little boggy once in a while.
Also I need to change that seal behind the front sprocket cuz it's still leaking.

sounds like it just needs a rebuild to me..
2 strokes   

[who else but rk]

might as well get vforce 3's while there out, helped my blaster alot

[Nick]

ok, FERK now you got me looking at pisstons! lol hey randy! i'll bring the bike with if you help me rebuild it! and you can even ride it! lydia can even show you how it's done! 

Anyone know the stock bore size?  53.95mm.?

[Krandall]

air cooled or liquid cooled motor? Should be a pretty quick fix,

[Nick]

air cooled or liquid cooled motor? Should be a pretty quick fix,

liquid cooled

[Nick]

i'm on ebay looking for the cheapest kit possible, she'll have to buy it herself though.


Item number: 360177459962 

[NaturalRaptor]

You could try a compression test to help narrow it down!

[Livingmylife93]

You could try a compression test to help narrow it down!

+1

RMATV has great rebuild kits for cheap

[Nick]

You could try a compression test to help narrow it down!

good idea