new rims and tires/drag struts

Started by 1badazz_700r, June 17, 2009, 05:02:00 PM

Previous topic - Next topic

1badazz_700r

well got my new rims and tires today to go drag racing :thumbs: and put on my struts. here are a few pictures of before during and after installation

Just a little 778
105.5 WK cylinder CP 11:1
hotrods +5 crank
racersedge +2 head,with webb4
54mmTB with custom intake
sparks X-6exhaust
PC5/w autotune
dynatek programmable
slingshot lockup
+3 stock swingarm
hiper dual beadlocks/w gncc holeshots
flexx bars,burgard+2stem/w antivibe
ASV's
odi's

1badazz_700r


Just a little 778
105.5 WK cylinder CP 11:1
hotrods +5 crank
racersedge +2 head,with webb4
54mmTB with custom intake
sparks X-6exhaust
PC5/w autotune
dynatek programmable
slingshot lockup
+3 stock swingarm
hiper dual beadlocks/w gncc holeshots
flexx bars,burgard+2stem/w antivibe
ASV's
odi's

Livingmylife93


preddy08

Holly blurry pictures Batman  :P


Watch out for the chain hitting the barkers
Just a little 81hp trail bike.


1badazz_700r

sorry about the blurry pictures,it was raining.As far as hitting the barkers it wont happen unless the chain flies off :lol: these struts are solid and where it sets is where its at.No give at all. I ran it like this last year with knobby tires and it was fine :thumbs: should be alot faster this year. i added the +5mm crank, better piston,PC5and autotune, and these taller tires. ran 13.88 @ 88mph last year

Just a little 778
105.5 WK cylinder CP 11:1
hotrods +5 crank
racersedge +2 head,with webb4
54mmTB with custom intake
sparks X-6exhaust
PC5/w autotune
dynatek programmable
slingshot lockup
+3 stock swingarm
hiper dual beadlocks/w gncc holeshots
flexx bars,burgard+2stem/w antivibe
ASV's
odi's

dgreenbluet

How much psi u running in those rear tires. 
08 Rapester/734cc 105.5mm Bore/11:1 JE Piston/Big Bore Barkers/FCI wBox/Dynateck Prog. Ign./PCIII/15T Sprocket/Trail Tech Vapor wDash Mount/Moose Nerf, Heel Guards, Race Pegs/Full Skids/Bling Star Victory Bumper/Six Pack Rack

1badazz_700r


Just a little 778
105.5 WK cylinder CP 11:1
hotrods +5 crank
racersedge +2 head,with webb4
54mmTB with custom intake
sparks X-6exhaust
PC5/w autotune
dynatek programmable
slingshot lockup
+3 stock swingarm
hiper dual beadlocks/w gncc holeshots
flexx bars,burgard+2stem/w antivibe
ASV's
odi's

tonyrt44

I'd remove all of those armor plates and bumper to reduce it weight...
Ranking:   ???
  

exentix

 :jaw: haha wow thats nice, cant wait to see it in person

just stoppin in to say hi, im on my way to florida  8)

Bert

Wonder if it would be faster with the front fenders removed?

1badazz_700r

Just back from drag racing. I had a blast.  My best time was 13.34@93.54mph,I ran some sort of crotch rocket and spanked him past the 330' and almost to the 1/8mile :lol: I kept thinking where the FERK is he,then he went by me :rofl:I have the video. also let me say that the autotune really does work for sure. my first few runs were running out of fuel on the top end,75mph in the 15's and of course i didnt have my computer. So i thought iam screwed. so i let it set for awhile and went out and thought what the hell im gonna try again. first pass 13.60's@91.6mph. So it actually adjusted for the lack of fuel and as the day went on it kept getting faster :thumbs: as soon as i figure out how to get the video's off the cell phone i will post some up here

Just a little 778
105.5 WK cylinder CP 11:1
hotrods +5 crank
racersedge +2 head,with webb4
54mmTB with custom intake
sparks X-6exhaust
PC5/w autotune
dynatek programmable
slingshot lockup
+3 stock swingarm
hiper dual beadlocks/w gncc holeshots
flexx bars,burgard+2stem/w antivibe
ASV's
odi's

r00st

Sounds you like had a good time! I want to take mine to the track pretty badly...

How did it hook out of the hole?
What was your 60' time?

ALso, I thought you have to go into the autotune software (with laptop) to accept the changes it has made, otherwise it will never actually create the map for the changes.
2007 Raptor 700 SE
With some SHTUFF

NaturalRaptor

Dam that is slammed and looking good!  :thumbs:  Sounds like it was a blast, can't wait to see the videos.
It takes 43 muscle's to frown and 17 to smile, but only 3 for proper trigger pull.

1badazz_700r

the autotune constantly changes and adjust's to get it tuned where you want it to be and where it needs to be. then when you accept the trims it writes it as a permanent map then you unhook and remove the O2 sensor and cap it off. This is what jamie at fuelmoto said to do. He said run it hard for a few days and let it do its thing. then accept the trims and unhook it until you need to make another map :thumbs: Trust me when i tell this damn autotune works better than you could ever imagine :thumbs:

Just a little 778
105.5 WK cylinder CP 11:1
hotrods +5 crank
racersedge +2 head,with webb4
54mmTB with custom intake
sparks X-6exhaust
PC5/w autotune
dynatek programmable
slingshot lockup
+3 stock swingarm
hiper dual beadlocks/w gncc holeshots
flexx bars,burgard+2stem/w antivibe
ASV's
odi's

1badazz_700r

my 60' times were 1.8's. I didnt heat the tires up at all, couldnt bring my self to smoke them new tires off yet :lol:. The next time i will torch them off and see if it helps. once i figure out how to get the videos off the cell phone i will post some video's. i can post the few i have on my camera when it wasnt running right yet. plus my girlfriend isnt the best at taking a video :lol:

Just a little 778
105.5 WK cylinder CP 11:1
hotrods +5 crank
racersedge +2 head,with webb4
54mmTB with custom intake
sparks X-6exhaust
PC5/w autotune
dynatek programmable
slingshot lockup
+3 stock swingarm
hiper dual beadlocks/w gncc holeshots
flexx bars,burgard+2stem/w antivibe
ASV's
odi's