KDS +2 Throttle Body BLOW OUT Group Buy!!!

[mustangracer42]

Is the graph kenny posted of a stock to +2 TB gain or +2 to +3 TB gain?  If it's stock to +2, what can we expect going from +2 to +3?

Thanks

[preddy08]

That was a back to back run I did before and after my TB bore. It was a +2mm

[Pldbryan]

Pretty sure I am in on this.  Do we have to wait for the total # or do we just send them into Kenny with some $?

BTW I talked to him this morning for a while and this is one funny dude.  We were talking Raptors for about 5 minutes and then spent about 30 min talking politics.  The line that got me went somethig like  "I don't own guns and I have no problem with those that do.  If you want to shoot a dear with a rocket launcher Go for it, the only thing I want is for someone to video tape so I can watch!"

[Out Back Welding]

add me to the list reguardless

i just wanted to know the price for a +3, and if the price wasnt too much of a difference i would get that instead , and if its too rich for my blood, then ill just go for that awesome +2 deal, and upgrade when the time comes :grin_nod:

[RaptorRandy]

That's a smoking deal right there......if I didn't already have a KDS +3mm TB I'd jump on it   

[Krandall]

KENNNNNNNNNY is ignoring me

Ken dog, what's the turn around time on these bad boys?

[Kenny]

KENNNNNNNNNY is ignoring me

Ken dog, what's the turn around time on these bad boys?

Dammmit man! Sorry 'bout that! I was in conference with that damn ol' Randy Barnes guy....... Turnaround is 3 days or less. I have a half dozen or so cores sitting here already bored. If you want a deal on a 3mm, you have to call me. The reason I don't have these on special is because I have dealers that have paid the normal price and have them sitting on the shelf. I can't be competing with my dealers........ That's just mean man

[Sand84]

You guys are gonna make me go broke

[Pldbryan]

So what is the protocal to do this, just send them to you Kenny and reference the group buy or do we have to wait?  Do you want it just pulled off and sent or do we need to strip stuff off of it?
I have not used Paypal forever, may be faster if I send a certified check with the TB, if I do that what is your last name??

[BLU700R]

What kind of HP difference would i be looking at here with my mods? The dynojet dyno i ran on put me at 53 HP. Would i gain some ponies off this purchase if i decide to?

[Krandall]

You guys are gonna make me go broke

[Krandall]

So what is the protocal to do this, just send them to you Kenny and reference the group buy or do we have to wait?  Do you want it just pulled off and sent or do we need to strip stuff off of it?
I have not used Paypal forever, may be faster if I send a certified check with the TB, if I do that what is your last name??

I believe you can make the checks payable to KDS Racing.

As far as the TB Goes. You can just pull it off and send it. (thats the way I did it)
Put a piece of paper in side the box w/ your nickname in there. If you're name is on the list on the first post. You're set!

[Kenny]

 

Pretty sure I am in on this.  Do we have to wait for the total # or do we just send them into Kenny with some $?

BTW I talked to him this morning for a while and this is one funny dude.  We were talking Raptors for about 5 minutes and then spent about 30 min talking politics.  The line that got me went somethig like  "I don't own guns and I have no problem with those that do.  If you want to shoot a dear with a rocket launcher Go for it, the only thing I want is for someone to video tape so I can watch!"

Just go ahead and send 'em out. If you wanna use paypal, the addy is kdsracing@gmail.com. You can tear them down or leave them complete.....makes no difference at all to me. I do suggest that you take the little black plastic cap off that is beside the idle adjustment. Those break during shipment on a fairly regular basis. At least spend some extra time to make sure that part is protected during shipment. I also highly recommend using the postal service (priority mail, not express), it will be here very quickly, with a much better price than the other shippers.

So what is the protocal to do this, just send them to you Kenny and reference the group buy or do we have to wait?  Do you want it just pulled off and sent or do we need to strip stuff off of it?
I have not used Paypal forever, may be faster if I send a certified check with the TB, if I do that what is your last name??

Just make it out to KDS Racing

What kind of HP difference would i be looking at here with my mods? The dynojet dyno i ran on put me at 53 HP. Would i gain some ponies off this purchase if i decide to?

You will normally see 1.5-2 hp over a fairly broad range. I don't recall ever seeing a torque loss down low.

[Kenny]

Is the graph kenny posted of a stock to +2 TB gain or +2 to +3 TB gain?  If it's stock to +2, what can we expect going from +2 to +3?

Thanks

You could see .5-1 hp. The main thing to consider is your overall goals, or ultimate potential. I have used the +2 well into the mid 70 hp range, and the +3 has gone well into the 80's. Even though TERB did 85 hp with a +2 on his Kenz built 797 Which probably says more about the build than it does about the TB :grin_nod:

[Colorado700R]

Is the graph kenny posted of a stock to +2 TB gain or +2 to +3 TB gain?  If it's stock to +2, what can we expect going from +2 to +3?

Thanks

You could see .5-1 hp. The main thing to consider is your overall goals, or ultimate potential. I have used the +2 well into the mid 70 hp range, and the +3 has gone well into the 80's. Even though TERB did 85 hp with a +2 on his Kenz built 797 Which probably says more about the build than it does about the TB :grin_nod:

Did you just give Kenz a compliment?...........hold on..............ordering Ice skates for hell.