New Fourwheeler (PICS 5/27 LAST PAGE)

[Krandall]

what color is everything gonna be?

[kyledvor61]

http://www.exriders.com/vbb/showthread.php?s=&threadid=253252&perpage=13&pagenumber=4

Frame and swinger is gonna be same color as the one all the way at the bottom. fluroscouent (sp I know, and dont care) orange. plastics a-arms hubs nerfs maybe others are gonna be black.

Head is being ported. 98mm CP 12.5:1 piston (480cc)

[dabigbratj]

should look good

[kyledvor61]

Got the head and piston in today. Cylinder is going to be bored today or tomorrow. new cam chain and head studs on order thru the dealer.

Head also had brand new valves guides everything 

Not bad for cell phone pics

[kyledvor61]

First Night





Yes thats a 14-71 blower in the background haha

[kyledvor61]

second day and current.




Waiting for hub seals, piston rings, and something else I cant remember from the dealer. Got my shiny new durablue axle in. Hopefully this weekend I can ride.



and I ditched the orange color scheme, went black spray paint. $500 cheaper and 3 weeks less sounded better to me

[kyledvor61]

First is suspension pulled up. 2nd is shocks pushed down. third is just a wider one

[Krandall]

how about a side shot showing the new fancy frame!

[kyledvor61]

so heres what I did

painted...
frame
swingarm
grab bar
nerfs
hubs
plastics
exhaust tip
gas tank

Bought a new head. and it came complete with brand new valves and guides etc.
got the head ported
cut out the airbox so its an open filter as you can see in 6th pic
got a durablue X-33 axle.
put on flexx bars
got silver and chrome handguards but there not on yet

[kyledvor61]

and dont be hatin on the blue seat. i never got around to recovering or dying it.

[preddy08]

Can a mini-ho muster up the umph to kick start the bike  

[kyledvor61]

Can a mini-ho muster up the umph to kick start the bike  

thats the thing, we couldnt get it started yesterday. It has spark (brand new plug) and its getting fuel. It would pop and sometimes run for a half second and die. in the driveway we tried pulling and dumping into gear and that didnt work either. timing is dead on as well.

but before i took it apart, it took me awhile when it was cold. but once it was warmed up i got it first kick

[Krandall]

any thoughts yet as to what it could be?

[kyledvor61]

nope not a clue. im just guessing it has to be the carb. it was being tossed around for awhile so it must not be working correctly. thats my only guess. timing is perfect, i know its getting fuel, and brand new plug has spark




what do you guys think of it? $30 and a few hours in spray paint later

[Krandall]

Looks a LOT better.

If you spray carb cleaner or starting fluid into the carb, will it run?