Extreme lift head

Started by Kenny, February 28, 2009, 06:31:36 PM

Previous topic - Next topic

Kenny

In case anyone ever wanted to know what .880" looks like compared to .519"(RJ) lift....... A complete valvetrain re-design is all it took.  ::)

I would like to give a special thanks to Racers Edge AZ for working so hard to get the port on this head the way I wanted it. You guys ROCK! :thumbs:

Before anyone even asks, this head design is especially for the latest super aggressive cams.


KDS Racing
685 Hope Rd
Floyd VA 24091
NEW PHONE 540-818-9154
Paypal: kenny@swva.net

:satan:

VelociRaptor


09RappySE

That look awsome kenny....Did my head come in the same box :clap:
734 09 Raptor
Meglodon by Bo,KW springs, Web 4 Cam, 54mm TB, 105.5mm CP cylinder, 12:1 CP,Barkers Inframe,Dynatek Coil,PC V,Dynatek Programable ignition,CCP stabilizer,+5 swinger,Boss Noss, Direct Drive Lock-up, KDS Evac valve,HID conversion,SPAL fan
Tuned by EHS Racing 74hp 52Tq

07 LT-R450
500cc Kit
Porting by Bo
DMC Pro Comp 4
Trinity intake
ATP intake Cam
Tuned by EHS 50hp 34Tq

tonto13

How much H.P. you hoping to get with this head?
MSAWS= My Sh*t Always Works Sometimes!
"99% of life is what you make of it, so if your life sucks, YOU SUCK!!!"
-Mike Muir (aka Tonto)


Kenny

Quote from: 09RappySE on February 28, 2009, 07:55:46 PM
That look awsome kenny....Did my head come in the same box :clap:
That is your head.... Still waiting for those damn retainers :'(
KDS Racing
685 Hope Rd
Floyd VA 24091
NEW PHONE 540-818-9154
Paypal: kenny@swva.net

:satan:

Kenny

Quote from: tonto13 on February 28, 2009, 08:12:23 PM
How much H.P. you hoping to get with this head?
I have no idea ??? It is getting us ready for some really nice cam work. It should be able to put 20% or more airflow into the engine on every cycle when combined with the right cam. Will that add up to 20% power increase? I doubt it, but once we are able to support it with the right components it should. This head has such a high airflow demand, that the FCI intake and Barker big bore pipes are going to feed a stock bore/stroke bike very well. This should change things up a bit 8)
KDS Racing
685 Hope Rd
Floyd VA 24091
NEW PHONE 540-818-9154
Paypal: kenny@swva.net

:satan:

tonto13

Always thinkin big Kenny!!! ??? You want to hit 90hp on stockbore/stoke don't you!!! :rofl:
MSAWS= My Sh*t Always Works Sometimes!
"99% of life is what you make of it, so if your life sucks, YOU SUCK!!!"
-Mike Muir (aka Tonto)


Kenny

Quote from: tonto13 on February 28, 2009, 08:33:00 PM
Always thinkin big Kenny!!! ??? You want to hit 90hp on stockbore/stoke don't you!!! :rofl:
Preferably on pump gas with about 50 ft-lbs tq at idle :rofl:
KDS Racing
685 Hope Rd
Floyd VA 24091
NEW PHONE 540-818-9154
Paypal: kenny@swva.net

:satan:

09RappySE

QuoteThat is your head.... Still waiting for those damn retainers

No wonder it looks so good :grin_nod:


QuoteYou want to hit 90hp on stockbore/stoke don't you!!!

Yes
734 09 Raptor
Meglodon by Bo,KW springs, Web 4 Cam, 54mm TB, 105.5mm CP cylinder, 12:1 CP,Barkers Inframe,Dynatek Coil,PC V,Dynatek Programable ignition,CCP stabilizer,+5 swinger,Boss Noss, Direct Drive Lock-up, KDS Evac valve,HID conversion,SPAL fan
Tuned by EHS Racing 74hp 52Tq

07 LT-R450
500cc Kit
Porting by Bo
DMC Pro Comp 4
Trinity intake
ATP intake Cam
Tuned by EHS 50hp 34Tq

Livingmylife93


Krandall

HOLY CRAP  :jaw:


You are THE man kenny.  :thumbs:


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

Out Back Welding


NaturalRaptor

The mad scientist at work here! Nice work!  :thumbs:
It takes 43 muscle's to frown and 17 to smile, but only 3 for proper trigger pull.

wastednuts