My winter build all done!

[rutcutter]

Ready for the 2009 season. My build consisted of: Racers Edge CNC ported head, Racers edge CP 12.1 piston, Megacam X4, Black Diamond +2 valves intake and exhaust, Kibble White valve springs, a custom curve from DL700 for the ignition, a Vapor computer, Pro Armor nerf bars with fat pegs and lastly HIDs in the stock location.

Check out my signature, what do you think I will make on the dyno?

[FoundArealQuad]

Nice

[Hefe]

is that a Harbor freight motorcycle hoist and harbor freight ramps too?

how did you hook them?

I have that hoist and those ramps, and I was thinking of doing that also..

can I get some close up pics plz?

oh.... yea...
Nice build!

[Krandall]

I wiould bet you'll be in the upper 50s low 60's

love the HID's


<edit: I thought I read 14:1 compression>

[rutcutter]

I welded reciever hitch size square stock to the table and the smaller receiver stock to the ramps. If you look close you can see where the welds burnt the paint.

They are from Harbor Freight. They had ATV extentions for the table but they wanted $299 for them, the ramps cost me $54.

I love the table!!!!!!!!!!!! Makes working on the bikes and quads actually enjoyable.

[Livingmylife93]

Nice Build!! 

[tonyrt44]

are you sure you have +2 on both exhaust and intake valves, X-4 cam on a stock bore/stroke ?

this is too much valving for a stock bore, and in my opinion, it will cost you hp/tq numbers.

I'd say high 50's - low low 60's

maybe others will chime in

[rutcutter]

That's correct stock bore, stroke, +2s and an X4.  We will just have to see how it works. If it doesn't perform I will just throw some more money at it.

Seat of the pants tuning in my pasture says it's working great!

[Hefe]

I welded reciever hitch size square stock to the table and the smaller receiver stock to the ramps. If you look close you can see where the welds burnt the paint.

They are from Harbor Freight. They had ATV extentions for the table but they wanted $299 for them, the ramps cost me $54.

I love the table!!!!!!!!!!!! Makes working on the bikes and quads actually enjoyable.

sweet..
that is the exact way I was thinking of doing it
glad to know someone tested it and it works good..
anything you would change?

[rutcutter]

Wouldn't change a thing. The ramps look like they are sagging but their not. Optical illusion from the camera?

[NaturalRaptor]

That sounds bad a**,  Nice work!   

[air]

Nice. It should make mid 60s.  Lets go break them in.

[rutcutter]

I wiould bet you'll be in the upper 50s low 60's

love the HID's


<edit: I thought I read 14:1 compression>

I was already at 56 hp, I hope this last $1400 bucks get me close to 70hp or beyond!

Going on KBRs dyno Friday morning.........I guess we will find out

[Onelunglow]

Good luck... keep us posted

[Krandall]

Looking forward to seeing the graphs man!