Secondary Coolant Return Line

Started by Mtneer Man, January 04, 2009, 08:14:21 PM

Previous topic - Next topic

Mtneer Man

Ive got my bike torn down and noticed there was a smaller coolant line goin from just below the thermostat to the radiator. Im setting my bike up for 300 ft drags and was wondering if this was needed or if it was ok to remove this and only run the main coolant return line.
T.W.S.S. Racing
Racers Edge AZ
Bo White (Velociraptor)
Stellar Machine and Performance

RaptorRandy

Are you going to be running an OEM bored TB or are you gonna run an aftermarket billet TB ?




07 Aljo 199LTD toy box
99 F250 PSD

Trust in the LORD with all your heart,
And lean not on your own understanding;
In all your ways acknowledge him,
And He shall direct your paths.

Mtneer Man

T.W.S.S. Racing
Racers Edge AZ
Bo White (Velociraptor)
Stellar Machine and Performance

RaptorRandy

There's no provision for the coolant lines in the A.M. TB's that I am aware of, so you'll need to plug those off.




07 Aljo 199LTD toy box
99 F250 PSD

Trust in the LORD with all your heart,
And lean not on your own understanding;
In all your ways acknowledge him,
And He shall direct your paths.

Mtneer Man

So I can plug the lines that went to the oem tb and the line goin to the radiator from the head (not the main) but the smaller one.
T.W.S.S. Racing
Racers Edge AZ
Bo White (Velociraptor)
Stellar Machine and Performance

RaptorRandy

Quote from: Mtneer Man on January 05, 2009, 12:40:14 PM
So I can plug the lines that went to the oem tb and the line goin to the radiator from the head (not the main) but the smaller one.


Pluging the line from the head to the rad doesn't sound right.....let me look on mine with the OEM TB tonight and I'll get back to you.  Hopefully Grant, aka Digital hearing sees this or someone else with an AM TB and chimes in.



Randy




07 Aljo 199LTD toy box
99 F250 PSD

Trust in the LORD with all your heart,
And lean not on your own understanding;
In all your ways acknowledge him,
And He shall direct your paths.

Mtneer Man

Thanks Randy, if i do end up needing it it is no big deal, just tryin to clean up the engine area and thought it looked like that might not be needed.
T.W.S.S. Racing
Racers Edge AZ
Bo White (Velociraptor)
Stellar Machine and Performance

Warren

i may be wrong but isn't that the bi-pass line. for when the engine isn't warmed up enough to pop the thermostat open the coolant bi-passes through there. but i like i said i could be wrong.  ???
:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB

Mtneer Man

Warren, I think you are correct. Im goin to leave it, dont want to tear up a new motor.
T.W.S.S. Racing
Racers Edge AZ
Bo White (Velociraptor)
Stellar Machine and Performance

Krandall

Meh... if the A.M ones aren't running it at all. what work around/ fix are they doing?  ???


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

RaptorRandy

Quote from: Krandall on January 05, 2009, 03:29:44 PM
Meh... if the A.M ones aren't running it at all. what work around/ fix are they doing?  ???


I think were talking about different hoses here.   The only thing you eliminate or disconnect from when running the A.M. TB's is the two small diameter hose's that run coolant thru the TB for the temp activated fuel enrichment circuit....to the best of my knowledge.


Randy   




07 Aljo 199LTD toy box
99 F250 PSD

Trust in the LORD with all your heart,
And lean not on your own understanding;
In all your ways acknowledge him,
And He shall direct your paths.

Mtneer Man

Your right Randy. We were talkin about 2 different hoses. I got he lined out now thanks to you and Warren.
T.W.S.S. Racing
Racers Edge AZ
Bo White (Velociraptor)
Stellar Machine and Performance

lotuseater

Quote from: Mtneer Man on January 05, 2009, 04:52:33 PM
Your right Randy. We were talkin about 2 different hoses. I got he lined out now thanks to you and Warren.

Don't forget about the phone support!   :lol:
SELF RACING

RaptorRandy

Quote from: Mtneer Man on January 05, 2009, 04:52:33 PM
Your right Randy. We were talkin about 2 different hoses. I got he lined out now thanks to you and Warren.



Glad to hear you got er figured out  :thumbs:




07 Aljo 199LTD toy box
99 F250 PSD

Trust in the LORD with all your heart,
And lean not on your own understanding;
In all your ways acknowledge him,
And He shall direct your paths.