Soon to add the Big 3, any advice?!?

[Peelz]

You guys are missing the point

Dude already bought his $hit, he's looking for maps and install help. 

Someone is paying attention!! 

sometimes I do....

Krandall has link to maps page at bottom of his sig. 

[Krandall]

http://pciii.raptorsource.com 

[BRAD]

Check Krandall's site out. It should give you all the maps you need for what your setup is

[zx10r203]

That was the first thing I looked at before I even made the purchase.  I saw that there is a map for the Barker system but it was done with a pro design intake system and I went with the FCI.  I know they flow differently but how good will the map work when its was made with a different intake system? 

[Peelz]

That was the first thing I looked at before I even made the purchase.  I saw that there is a map for the Barker system but it was done with a pro design intake system and I went with the FCI.  I know they flow differently but how good will the map work when its was made with a different intake system? 

won't be far off. DO a plug check just in case.

[zx10r203]

That was the first thing I looked at before I even made the purchase.  I saw that there is a map for the Barker system but it was done with a pro design intake system and I went with the FCI.  I know they flow differently but how good will the map work when its was made with a different intake system? 

won't be far off. DO a plug check just in case.

So what would I be looking for?  What condition should the plug be??

[Peelz]

That was the first thing I looked at before I even made the purchase.  I saw that there is a map for the Barker system but it was done with a pro design intake system and I went with the FCI.  I know they flow differently but how good will the map work when its was made with a different intake system? 

won't be far off. DO a plug check just in case.

So what would I be looking for?  What condition should the plug be??

Install your mods, let it warm up...Then ride full throttle for a little ways, and kill the engine. Instantly remove spark plug and inspect color. You are looking for a slightly brown or beige looking plug. Black is too rich. White deposits on electrode mean you are lean and too hot.


excellent thread from dragstuff .com

http://www.dragstuff.com/techarticles/how-to-read-plugs.html

Link VIA hmf engineering site. Read up, it is very helpful.

https://hmfengineering.com/forums/showthread.php?t=1176

[zx10r203]

Thanks for the help Peels!! 

[Peelz]

Thanks for the help Peels!! 

no prob...good luck to you.

[TechQuadShop]

Thank you for the order!  We appreciate it very much.  The pc3 was loaded with a map that should be compatible for your exact setup.  I do always recommend to do a plug check after a short ride and if there are any issues report back and I can walk you through the adjustments needed or I can do the adjustments for you and email you the new map.


Steve

[zx10r203]

Thank you for the order!  We appreciate it very much.  The pc3 was loaded with a map that should be compatible for your exact setup.  I do always recommend to do a plug check after a short ride and if there are any issues report back and I can walk you through the adjustments needed or I can do the adjustments for you and email you the new map.


Steve

Thanks Steve,    for TQS

[fireman5166]

another satisfied customer 

[zx10r203]

another satisfied customer 

I never said I wasn't!!   I was just trying to plan out if I need to get a custom map made.