KDS Racing's new Cams

[air]

What do you have to do to the head and rockers to get one of these bad boys to fit

[DL700]

some slight clearancing to the rockers....same as the megacycle cams....


soon as i get all my parts we will have some test results on THE FIRST FULL KDS RACING STOCK BORE BUILD 

[Buck]

some slight clearancing to the rockers....same as the megacycle cams....


soon as i get all my parts we will have some test results on THE FIRST FULL KDS RACING STOCK BORE BUILD 

can't wait!

[mustangracer42]

Anybody selling their used cam when they upgrade let me know what you have and a price.  I'm just getting started modding my rappy so this is a little much for me right now.
Jeremy

[r00st]

That looks...amazing

I trust ya DL so be sure to give us the full scoop!

I originally wanted to strip the motor and drop in a + 5 hot rods...but I think I can get the bottom/midrange I want with either the true 11:1 or the 12.5 with this cam, the cnc'd head and the +3 TB on top of my barkers/pcIII/pro design/dynatek/evac valve.

I am at 900 ft elevation... would I be anywhere near the limit on the TRUE 11:1 on 93 octane? Anyway I can squeek by on an 11.5 (if we can make it happen) on 93 octane? I just hate running/mixing race gas.

I NEED some solid off idle torqe with mega-strong midrange and a solid top end.

[Kenny]

And here is the most excellent .575" lift.....

[Colorado700R]

And here is the most excellent .575" lift.....

Nice Kenny, what's the best compression match for that cam?

[Kenny]

I would want to see 12.5:1(ideally), but 11:1 will work fine

[Colorado700R]

I would want to see 12.5:1(ideally), but 11:1 will work fine

I think I already know the anawer, but will head work be required to install this?

[Kenny]

Not strictly required.....Rocker mods and springs are a must.

[Buck]

That looks...amazing

I trust ya DL so be sure to give us the full scoop!

I originally wanted to strip the motor and drop in a + 5 hot rods...but I think I can get the bottom/midrange I want with either the true 11:1 or the 12.5 with this cam, the cnc'd head and the +3 TB on top of my barkers/pcIII/pro design/dynatek/evac valve.

I am at 900 ft elevation... would I be anywhere near the limit on the TRUE 11:1 on 93 octane? Anyway I can squeek by on an 11.5 (if we can make it happen) on 93 octane? I just hate running/mixing race gas.

I NEED some solid off idle torqe with mega-strong midrange and a solid top end.

Don't we all!    :grin_nod:

[fastraptor]

NIZZZZE!!!!!!!!!!!  bump stick!!!!!!!!