383 or hot rod tbi motor

[UncleBeaner]

to go tbi or carbed. if i go with a 383 i will run a carb becasue i will be on the border of tuning for the tbi. or this hot rod tbi motor set up with some head work.--->http://www.thirdgen.org/techboard/tbi/391406-budget-tbi-buildup.html. in the middle right now of course this is for the jeep. hmmmmmmmmmmmmmmmmmmmmmmmmm

[Colorado700R]

question for your question beans 

Can a TBI suffer like a carb at extreme angles?  I know the rockcrawler dues out here run full injector set ups becuase of extreme angle hesitation and stall due to carb issues.

Aaron

[UncleBeaner]

question for your question beans 

Can a TBI suffer like a carb at extreme angles?  I know the rockcrawler dues out here run full injector set ups becuase of extreme angle hesitation and stall due to carb issues.

Aaron

no it will run up side down. but a 383= the hotness. honestly the tbi set is what i should do because it make since but ive wanted a 383 for a while

[Colorado700R]

To me then it depends on the applications you plan on doing with it.  Mudding, and general romping around I'd choose the 383.  If your really going extreme climbing then TBI.

I'd go with the hottness 

[UncleBeaner]

http://www.youtube.com/watch?v=0Zk17MW9j4g    = the dead duck next year

[Flynbyu]

TBI?

You mean TPI?

Tuned Port Injection?

~Brian

[Colorado700R]

TBI?

You mean TPI?

Tuned Port Injection?

~Brian

Throttle body injected (TBI) homenut 

[UncleBeaner]

TBI?

You mean TPI?

Tuned Port Injection?

~Brian

Throttle body injected (TBI) homenut 

horray not everyones a retard lol





j/k

[Flynbyu]

TBI?

You mean TPI?

Tuned Port Injection?

~Brian

Throttle body injected (TBI) homenut 

I can see! I can see! I can see!

~Brian

[Jamie700R]

I was going to do a 350 TBI setup for my 3rd gen. But the tuning was a bitch and i was not about to buy all these cables and try to tune it myself.And the 3rd gen forum was no help. It might of been easier with an automatic trans but mine was manual and they didnt offer a chip for a manual 350 car. I would build up a 383 with the holley truck avenger carb. I do have a Crane cams ignition system for sale out of my TBI with a PS 92 coil and a harness for TBI external coil. It was used for about 3 years. Still have the books for it If your interested.

[attachment deleted by admin]

[UncleBeaner]

how much? im gonna run a mega squirt system to run the tbi

[Jamie700R]

I also have a low temp fan switch new in box for sale too. All for 300+ shipping

[attachment deleted by admin]

[FoundArealQuad]

I'll sell you my 454 TBI set up. Yes the TBI will cut out like a carb at extreme. The fuel rail set ups are direct injection into the cylinder.

[Jamie700R]

This link might be of some use
http://turbocity.com/

[UncleBeaner]

I'll sell you my 454 TBI set up. Yes the TBI will cut out like a carb at extreme. The fuel rail set ups are direct injection into the cylinder.

couple things with this. yes it will cut out with stock unit but with 30 psi+ it will be hard.  tbi and carbs cannot be compaired far as cutting out on angles.with the proper set up this unit can be relieable. what do you want for the 454 stuff.