lets talk mods and prices.

Started by Warren, September 18, 2008, 07:34:27 PM

Previous topic - Next topic

socalrappy700

Quote from: exentix on September 21, 2008, 09:42:23 AM
devan runs vp race fuel on his 12.5:1 piston and he gets his in 5 gallons and its 55 bucks, 11 a gallon for you slow math guys  :lol:

I bet he's buying it from the dealership by the can.  Its crazy expensive. 
07 SE2

~Erich


Yamaha Raptor Forum

Warren

ok i think i will just stay with a 11:1 piston. if i wanted to could i run race fuel with that compression?


what about a stage 3 cam? would that just be over kill?


or the +3 TB? is that to much too?
:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB

wobble

Quote from: warren on September 21, 2008, 11:56:23 AM
ok i think i will just stay with a 11:1 piston. if i wanted to could i run race fuel with that compression?

You could, but you'd be wasting your money. Higher octane will not give you any more power.

Quote from: warren on September 21, 2008, 11:56:23 AM
what about a stage 3 cam? would that just be over kill?

That would be fine. Depends on your riding style. I ride alot of tight, technical trails, so I love my HC2.

Quote from: warren on September 21, 2008, 11:56:23 AM
or the +3 TB? is that to much too?

From what I understand, a +3 is used more with the larger builds. Kenny would be the one to talk to about this.

Warren

ok so i will just stick to the stage 2 cam and +2 TB.
:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB

exentix

Quote from: Socalrappy700 on September 21, 2008, 10:05:58 AM
Quote from: exentix on September 21, 2008, 09:42:23 AM
devan runs vp race fuel on his 12.5:1 piston and he gets his in 5 gallons and its 55 bucks, 11 a gallon for you slow math guys  :lol:

I bet he's buying it from the dealership by the can.  Its crazy expensive. 
no its actually an exotic car dealership

socalrappy700

Quote from: exentix on September 21, 2008, 05:24:02 PM
Quote from: Socalrappy700 on September 21, 2008, 10:05:58 AM
Quote from: exentix on September 21, 2008, 09:42:23 AM
devan runs vp race fuel on his 12.5:1 piston and he gets his in 5 gallons and its 55 bucks, 11 a gallon for you slow math guys  :lol:

I bet he's buying it from the dealership by the can.  Its crazy expensive. 
no its actually an exotic car dealership

That makes sense.  You can call VP and they will tell you the closest station that has it on the pump.
07 SE2

~Erich


Yamaha Raptor Forum

exentix

this one isnt even on pump, they have a shed full of cans of it.

but back on topic, i say 11:1 just so you can run gas that wont break the bank if you ride alot lol

Bert

I say
FCI Intake
+2TB
DynaTek with custom curve

I'm staying out of my motor as long as possible, until it starts smoking or worse, I still need shocks & a-arms.  When the time comes to go inside the motor the previous mods will be there waiting for the cam,piston, P&P. 

Warren

well i thank you all for your in put in this thread. but i decided that i will be waiting alittle bit longer before i do anything.
:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB

Krandall

you don't want to be the "slow" guy do you?  :lol:


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

Bert

Sounds like Warren is saving for a Rocket Factory Long Rod 907cc  >:D

Warren

Quote from: Krandall on September 23, 2008, 07:56:33 AM
you don't want to be the "slow" guy do you?  :lol:


it's faster then yours right now.  :P


i just think that i should get my truck and the wolverine paid off before i do anything else to mine.
:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB

socalrappy700

Quote from: warren on September 23, 2008, 05:23:01 PM
Quote from: Krandall on September 23, 2008, 07:56:33 AM
you don't want to be the "slow" guy do you?  :lol:


it's faster then yours right now.  :P


i just think that i should get my truck and the wolverine paid off before i do anything else to mine.

So just how is yours faster then his 727?

:lol:
07 SE2

~Erich


Yamaha Raptor Forum

Krandall

Quote from: Socalrappy700 on September 23, 2008, 05:24:23 PM
Quote from: warren on September 23, 2008, 05:23:01 PM
Quote from: Krandall on September 23, 2008, 07:56:33 AM
you don't want to be the "slow" guy do you?  :lol:


it's faster then yours right now.  :P


i just think that i should get my truck and the wolverine paid off before i do anything else to mine.

So just how is yours faster then his 727?

:lol:

Another bastard referring to the broken swing-arm I'm sure....     :lol: :lol: :lol: :lol:


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

Warren

Quote from: Krandall on September 23, 2008, 08:46:59 PM
Quote from: Socalrappy700 on September 23, 2008, 05:24:23 PM
Quote from: warren on September 23, 2008, 05:23:01 PM
Quote from: Krandall on September 23, 2008, 07:56:33 AM
you don't want to be the "slow" guy do you?  :lol:


it's faster then yours right now.  :P


i just think that i should get my truck and the wolverine paid off before i do anything else to mine.

So just how is yours faster then his 727?

:lol:

Another Bass Turd referring to the broken swing-arm I'm sure....     :lol: :lol: :lol: :lol:

you got it.  :rofl:
:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB