DMC's New drag style exhaust!

Started by TechQuadShop, July 30, 2008, 12:17:01 PM

Previous topic - Next topic

preddy08

I like!! Heat shields, good solid two bolt mounting for the cans. Could you PM me a price just for shits and giggles.
Just a little 81hp trail bike.


russ-russ

Those look good!  Like preddy said, I like the heat shields.  It pisses me off that I can't wear my over-the-boot pants with my Monsters without leaving some pants on the pipes.  :mad:

BADRAP08

so it says "Drag" style does that mean they are meant for heavily modded bikes  :confused:  i thought i read that somewhere... Rf maybe ??? hmmm i dont remember anyways i still havent done my three mod yet and was just curious.... obviously would like to see some dynos first before i empty my wallet but shit ive waited this long for dasa and still nothing so whats another 4 to 36 months :rofl:.........:'(
08 700R SE

BADRAP08

Quote from: BADRAP08 on August 05, 2008, 12:57:50 AM
so it says "Drag" style does that mean they are meant for heavily modded bikes  :confused: 

Anybody ???
08 700R SE

socalrappy700

I think no one really knows what is the deal with the new pipes yet.
07 SE2

~Erich


Yamaha Raptor Forum

TechQuadShop

I should be getting a set tomorrow so I will do some testing over the weekend.

Drag style seems like a marketing gimmick to me.  They should work just fine for stock bores
RAPTORSOURCE.COM #1 PLACE FOR BARKER AND MONSTER DUALS, PC3'S, INTAKES, AND MUCH MORE



For all of your aftermarket Raptor needs Call Tech Quad Shop @ 530-938-3985

Colorado700R

Quote from: TechQuadShop on August 06, 2008, 10:01:50 AM
I should be getting a set tomorrow so I will do some testing over the weekend.

Drag style seems like a marketing gimmick to me.  They should work just fine for stock bores

Send them to me, I'll test them for free  :clap:

digitalhearing

Quote from: BADRAP08 on August 05, 2008, 12:57:50 AM
so it says "Drag" style does that mean they are meant for heavily modded bikes  :confused:  i thought i read that somewhere... Rf maybe ??? hmmm i dont remember anyways i still havent done my three mod yet and was just curious.... obviously would like to see some dynos first before i empty my wallet but shit ive waited this long for dasa and still nothing so whats another 4 to 36 months :rofl:.........:'(

Is Dasa supposed to be the biggest horsepower pipes so far?  I don't know much about them but once in a while I see somone like yourself waiting anxiously to get a set of these.  I am looking in the near future for another set of big pipes.

Grant
This Forum Rocks !

RaptorRandy

Quote

Is Dasa supposed to be the biggest horsepower pipes so far?  I don't know much about them but once in a while I see somone like yourself waiting anxiously to get a set of these.  I am looking in the near future for another set of big pipes.

Grant


Grant,

I think it's the same hype you see on all new stuff. As I understand it they are a good 6 months out and I have a hard time believing that there gonna be enough better than the barkers HP & TQ wise to show any difference on the short hills we run here in Oregon.
Myself, I'll wait till Dave at Rooster Built has a chance to do some testing on them before I make any decsions on my next exhaust system, if I even see one that will motivate me to make a change from what I'm already making good power with.

Randy

Krandall

dang those look SWEEEEEEEEEEET!!!!!

It'd have to be a pretty big proven gap to get me off my barkers though. 8)


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

BADRAP08



Is Dasa supposed to be the biggest horsepower pipes so far?  I don't know much about them but once in a while I see somone like yourself waiting anxiously to get a set of these.  I am looking in the near future for another set of big pipes.

Grant

[/quote]

I dont know either but i love the looks/fit and finish of Dasa's pipes (at least the pipes they have out now):thumbs: i am not a huge fan of the looks of the monsters or barkers with the exception of the polished Barkers :grin_nod:....I do however like the looks of the DMC's but after reading about thier " sub par" flow i had counted them out... until now :confused:

its really all looks for me, Assuming they were all equal i would choose the Dasa's or the DMC's over Monsters or Barkers. If this was not the case then obviously performance is priority #1 and i would have a set of Barkers.

My buddy has a Honda CRF450R with the White Bros Carbon Pro exhaust and its one of the best looking exhaust i have ever seen IMO.

White Bros Carbon Pro duals for the rappy would be a dream come true :grin_nod:....aesthetically
08 700R SE

digitalhearing

Yea, we have to kind of wade through the new products to see if they are really as good as they claim.  Although without new products, we would still be back doing our 3 mods.

Grant
This Forum Rocks !

TechQuadShop







Im gonna test them out on the raptor tomorrow.
RAPTORSOURCE.COM #1 PLACE FOR BARKER AND MONSTER DUALS, PC3'S, INTAKES, AND MUCH MORE



For all of your aftermarket Raptor needs Call Tech Quad Shop @ 530-938-3985

exentix


kyledvor61