Vapor Speedo Help.

Started by 22Chet, July 17, 2008, 11:03:18 AM

Previous topic - Next topic

22Chet

so i tried to trouble shoot my speedo problems today and it did not help. Here are some pics of what my setup looks like, can anyone see anything wrong ?



2006 Raptor 700
GYTR Exhaust
GYTR Intake
PCIII
15t Sprocket
TrailTech Vapor

Duane

whats wrong with it? not reading? Off?
07 Rappy 700r SE1
1. Barker duals
2. FuelATV air filter
3. PCIIIusb
4. Prog Dyantek ing
5. stgII Hotcm
6. Kenny TB bore
7. JE 11-1 piston
ebay 8k HIDs, skat 21/12-8 7 paddles, I-shock I4500, G-force axle, CCP sterring stabilizer
other toy 66 2 door post Nova, LS1/4l60e, in progress

22Chet

2006 Raptor 700
GYTR Exhaust
GYTR Intake
PCIII
15t Sprocket
TrailTech Vapor

Duane

Quote from: 22Chet on July 19, 2008, 01:14:01 PM
its not reading anything

How much gap do you have between the mag pickup?
07 Rappy 700r SE1
1. Barker duals
2. FuelATV air filter
3. PCIIIusb
4. Prog Dyantek ing
5. stgII Hotcm
6. Kenny TB bore
7. JE 11-1 piston
ebay 8k HIDs, skat 21/12-8 7 paddles, I-shock I4500, G-force axle, CCP sterring stabilizer
other toy 66 2 door post Nova, LS1/4l60e, in progress

22Chet

i got them as close as i could without them touching.
2006 Raptor 700
GYTR Exhaust
GYTR Intake
PCIII
15t Sprocket
TrailTech Vapor

Livingmylife93

I take it it used to work, and now it wont?
You have used it before and now it wont work correct?

vreds

does the magnet is still in the magnetic bolt ? Try to pass a known good magnet next to the sensor, you'll see if it works.
Raptor 700 2006 ... now with a dead engine :(

PC5
YFZ front shock
CCP stabilizer
Lonestar axle

Duane

Quote from: vreds on July 20, 2008, 02:23:41 PM
does the magnet is still in the magnetic bolt ? Try to pass a known good magnet next to the sensor, you'll see if it works.

Doesn't look like there is a magnet on the bolt. Pictures didn't load first time, so I didn't notice. Doesn't look like you have the supplied bolt installed.
07 Rappy 700r SE1
1. Barker duals
2. FuelATV air filter
3. PCIIIusb
4. Prog Dyantek ing
5. stgII Hotcm
6. Kenny TB bore
7. JE 11-1 piston
ebay 8k HIDs, skat 21/12-8 7 paddles, I-shock I4500, G-force axle, CCP sterring stabilizer
other toy 66 2 door post Nova, LS1/4l60e, in progress

Livingmylife93

Yea u might have lost the magnet.
They give u a spare in the kit, i still have my spare and dont need it anymore, if i can find it you can have it if you need it.

22Chet

which bolt ? The one in the rotor(dont really know the proper name) or the one that i put in the C bracket ?
2006 Raptor 700
GYTR Exhaust
GYTR Intake
PCIII
15t Sprocket
TrailTech Vapor

Livingmylife93

Look on the end of the bolt on the bracket and see if there is still a little magnet in it.

22Chet

nope, there was but now there is not. Someone told me i didnt need a magnet there, guess they were wrong. Ill try and find one does it matter how big it is cause i think i have a couple small ones.
2006 Raptor 700
GYTR Exhaust
GYTR Intake
PCIII
15t Sprocket
TrailTech Vapor

Livingmylife93

Not sure, would you like me to send you mine?