2005 Raptor 660r intake kits

[darkside94]

I was wondering which one of these is a better intake kit.

http://www.rockymountainatv.com/productDetail.do?navType=type&navTitle=Intake%2FFuel&webTypeId=80&webCatId=16&prodFamilyId=5794#vehicleSelect
or...
http://www.rockymountainatv.com/productDetail.do?navType=type&navTitle=Intake%2FFuel&webTypeId=80&webCatId=16&prodFamilyId=9299#vehicleSelect

[Caliraptor]

foam for dirt, knn for sand the proflow kit is the best

[darkside94]

do you have a link to the proflow kit

[ThisGuyAlex]

K$N with an outerwear for everything....on the proflow kit....

[darkside94]

do i need to rejet it if i buy an intake system and filter and leave the airbox lid off

[Colorado700R]

do i need to rejet it if i buy an intake system and filter and leave the airbox lid off

yes

[darkside94]

what jet do you think i should go with? i will have full ct racing and pro flow k&n intake and im at like 10ft altitude

[Colorado700R]

what jet do you think i should go with? i will have full ct racing and pro flow k&n intake and im at like 10ft altitude

10 ft    That's awesome !!!  I'll PM some of our jetting pro's for ya 

[darkside94]

Yeah FL's highest hill is probably a construction site dirt pile 
(thats not a joke) do the ct pipes stick out really far in the back? if so what is a good fix or full exhaust alternative for less than $550

[#X-RIDER#]

K$N with an outerwear for everything....on the proflow kit....

+1 

[darkside94]

what is a good exhaust under 550 that has comparable performance to the ct sonic but doesnt stick out as far? the only reason im worried about getting a ct is that it sticks out pretty far behind the back and im bonud to try to wheelie it and it would be a disaster if i messed up a 550 dollar exhaust from going back to far. or can i get a front grab bar that sticks out further

[Colorado700R]

HMF, Pro-circuit, or a used Yoshi (might be too long though  )


Aaron

[darkside94]

how much performance boost does a full system hmf pipe give? ive seen the dirt wheels shoot out but it doesnt have hmf

[ThisGuyAlex]

try this first if you wanna run with your air box lid on.....
main jets:        Mikuni 155 left, 160 right
Pilot jets:        Mikuni 25
Needles:         Stock
Mixture screw: 2.5 turns from full seated


and if you wanna run with out it....(my recommendation)
pilots: same as above....
mains: L:170, R:175     or L:165, R:170

[darkside94]

why do you recommend running different jets for left and right