700 crank problem edit: not anymore :)

Started by vreds, November 08, 2009, 08:35:53 AM

Previous topic - Next topic

vreds

Raptor 700 2006 ... now with a dead engine :(

PC5
YFZ front shock
CCP stabilizer
Lonestar axle

1badazz_700r

i would bore it and have it sleeved. then you have a bigbore/stroker all at once :thumbs:

Just a little 778
105.5 WK cylinder CP 11:1
hotrods +5 crank
racersedge +2 head,with webb4
54mmTB with custom intake
sparks X-6exhaust
PC5/w autotune
dynatek programmable
slingshot lockup
+3 stock swingarm
hiper dual beadlocks/w gncc holeshots
flexx bars,burgard+2stem/w antivibe
ASV's
odi's

vreds

I'm still a student, and I have some other concern right now. I'll have a good job in about 8 month, but now I just want it to run until that time.  :thumbs:
Raptor 700 2006 ... now with a dead engine :(

PC5
YFZ front shock
CCP stabilizer
Lonestar axle

vreds

Finally started it up last night, it seems to pull harder...  :rolleyes: Can't really say because it's 2 degrees since 3 days and it's icy all around. All it would do was spin spin and spin all over the place. Even the road part that seemed to be dry pavement were too icy to have some kind of traction...


I guess i'll have to wait it get warmer....  :rolleyes:

Is the chain always that noisy ? I washed every part, and I think that there was so much chain grease built-up that the sound was deadened before... now it's bare plastic and it sound somewhat strange when I let off gas...
Raptor 700 2006 ... now with a dead engine :(

PC5
YFZ front shock
CCP stabilizer
Lonestar axle

Krandall

I would be its the chain roller. If you look on the bottom of the left side of the frame. there's a cheap ass roller in there (if it's stock)


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

vreds

Yeah, it is still stock unit, but I got a lathe and made a place to put a second bearing on the other side... Stock one had a bearing on one side and a bushing on the other side...  :rolleyes: But it looks like it don't made much sound when I spin it by hand....
Raptor 700 2006 ... now with a dead engine :(

PC5
YFZ front shock
CCP stabilizer
Lonestar axle