Check Engine

[Peelz]

this quad RIPSSSS!!!!!

Boy, I remember that feeling! Directly followed by, man, this thing is kinda slow, What exhaust should I buy?

[BackwoodsBoy]

Haha, and there goes the wallet!

[monster757]

Well today was dandy, lost the front right A arm skid plate. (found it with missing mount) lost 3 out of 4 bolts in the rear skid. Lost the bolt of out the clutch. Caught a rock or something and it sliced a nice gash in my tire. Which leads me to my next point, how do i fix a gash in a tire? I stuck two plugs in it but idk if they will hold.

[Colorado700R]

Well today was dandy, lost the front right A arm skid plate. (found it with missing mount) lost 3 out of 4 bolts in the rear skid. Lost the bolt of out the clutch. Caught a rock or something and it sliced a nice gash in my tire. Which leads me to my next point, how do i fix a gash in a tire? I stuck two plugs in it but idk if they will hold.

If it's on the side wall it's toast in my experience    Might wanna check out the for sale thread for some used tires.  Sorry for your luck.  And Locktite everything on the skids 

[monster757]

No, it was like right beside a knobby so i stuck two plugs in it and it still has a slow leak. I think i will just tube it.

[Krandall]

I'm going to be selling a set of used YFZ tires (Same Exact Size as Stock Raptor Tires) $40+shipping for both.

[monster757]

So I was trying to fix the TPS, and now i have a code 14.

[Krandall]

Intake air pressure sensor hose is detached, clogged, kinked, or pinched. Or Malfunction in ECU.


Hmmmm, I'm forgetting what my intake boot looks like, but I believe there's a rubber hose somewhere attached ot it..

[monster757]

Krandall you are on the ball! But i disconnected it to pull the hose out, then put it back on. Is there a way to reset the check engine light?

[Krandall]

Thanks 

The only way to reset it is un plug the power from the battery, I believe it has to sit 10-15 mins. Hook it back up and you should be good to go.

[Peelz]

Thanks 

The only way to reset it is un plug the power from the battery, I believe it has to sit 10-15 mins. Hook it back up and you should be good to go.

+1 10 minutes is industry standard.

[monster757]

Supposedly there is a sensor that shuts the bike of when it thinks it is about to roll. At least thats what the parts changer at the dealer said. Is there a way to shut the light off yourself if this happens again?

[Colorado700R]

Supposedly there is a sensor that shuts the bike of when it thinks it is about to roll. At least thats what the parts changer at the dealer said. Is there a way to shut the light off yourself if this happens again?

All you need to do to reset the roll over is shut the key (not the killswitch) off for a few seconds then restart.