Does anyone have a picture of a Wheelie Bar on a raptor 700?

Started by powder coater, August 13, 2008, 06:38:20 PM

Previous topic - Next topic

Krandall

Not a raptor but a good idea none the less...

I know on my swinger, I had to use my own bolts for the pinch bolts...  could you use longer ones and make a braket that bolts up to them?  (more ideas)



Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

RaptorRandy

Quote from: powder coater on August 14, 2008, 07:21:46 AM
Thanks. I wonder if welding a tab to the rear strut would work the same?



That is the prefered method amoung the flat draggers from what I have seen.

Mount the lower tube to the pinch bolts on the swinger and the upper tube to a tab on the strut.

scholle

 I prefer the 4 bar setups. If your not running a rigid rear or strut it may be difficult to to attach it to the subframe. Use a plate bolted to your carrier pinch bolts. That way you wont have to readjust your chain when you take it off or adjust it.
Just remember that a wheelie bar will act just like a rudder and steer the bike.