Does anyone have a picture of a Wheelie Bar on a raptor 700?

Started by powder coater, August 13, 2008, 06:38:20 PM

Previous topic - Next topic

powder coater

Im building a wheelie bar and am trying to decide how to mount it to the stock sub frame. If anyone has a picture I would appreciate it.
Jason for Presedent !

Peelz

Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"


Livingmylife93


shookie

2008 Raptor 700r SE
Hmf Ballance(black), PCV, Pro Design Foam,Maxxis razr 2 all the way around, Pro Taper SE Raptor Bend, ASV Levers, odi ROUGE lock on grips, Tusk Billet gas cap, Dr. D Reverse Lever, Rock A-arm guards, Rock nerfs
I Reject Your Reality And Substitute My Own

1FST690

The easiest one I have seen is one of 2 ways. Either remove the grab bar and use 1 bolt on each side, or use both mounting bolts on each side with a U shaped piece that runs under the subframe with center mounting tabs for the bar :thumbs:
04 686 Duner
02 NMR 650+ modified "High Mainenance"
02 Scrambler 500
02 Sportsman 500HO ( For Sale )

powder coater

that's an idea. With the rules I don't think one on each side will work but I could make a bracket and tie them together in the middle. I also thought about a bracket in the middle of the grab bar?
Jason for Presedent !

maxx

Paul the ones i looked at @ dunefest attached to the carrier and grabbar mount.
Bring a Gun to a Gun fight.

1FST690

Quote from: powder coater on August 13, 2008, 07:58:09 PM
that's an idea. With the rules I don't think one on each side will work but I could make a bracket and tie them together in the middle. I also thought about a bracket in the middle of the grab bar?

What do ya mean by the rules? What class are you planning on running?
04 686 Duner
02 NMR 650+ modified "High Mainenance"
02 Scrambler 500
02 Sportsman 500HO ( For Sale )

powder coater

Jason for Presedent !

1FST690

04 686 Duner
02 NMR 650+ modified "High Mainenance"
02 Scrambler 500
02 Sportsman 500HO ( For Sale )

jwraptor

Mine mounts to tje swingarm.  You can see at least one bracket on the top.

[attachment deleted by admin]

Bert


jwraptor

A 3G-wheelie bar mounts to your pinch bolts on the swingarm and a U-bolt around the grab bar they provide.  Don't try using a u-bolt with your stock grab b/c eventually it will snap in half.

powder coater

Thanks. I wonder if welding a tab to the rear strut would work the same?
Jason for Presedent !

Krandall

or if your carrier shows... since there's nothing in the middle of the carrier either something that wraps around and pinches onto that or even drilling through it?  (just throwin out idears)


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once