RaptorSource.com

Raptor 700 Information => 700 Motor Mods => Topic started by: Mtneer Man on May 29, 2008, 04:04:09 PM

Title: I need a map Monsters/Stock Bore 14:1/X2/+2 TB
Post by: Mtneer Man on May 29, 2008, 04:04:09 PM
I just need a map to get me close. Email me at cwilmoth@wilmothco.com
Title: Re: I need a map Monsters/Stock Bore 14:1/X2/+2 TB
Post by: Colorado700R on May 29, 2008, 04:06:31 PM
Quote from: Mtneer Man on May 29, 2008, 04:04:09 PM
I just need a map to get me close. Email me at cwilmoth@wilmothco.com

What intake?
Title: Re: I need a map Monsters/Stock Bore 14:1/X2/+2 TB
Post by: preddy08 on May 29, 2008, 04:07:59 PM
Mine might be close.
Title: Re: I need a map Monsters/Stock Bore 14:1/X2/+2 TB
Post by: realdeal on May 29, 2008, 04:54:17 PM
not sure but ive got a map for HC2, +2 TB, Monster, intake. ran good for me. ill send it to ya anyway. you can compare the maps yourself.
Title: Re: I need a map Monsters/Stock Bore 14:1/X2/+2 TB
Post by: Mtneer Man on May 29, 2008, 05:11:50 PM
Quote from: Colorado700R on May 29, 2008, 04:06:31 PM
Quote from: Mtneer Man on May 29, 2008, 04:04:09 PM
I just need a map to get me close. Email me at cwilmoth@wilmothco.com

What intake?

I knew i forgot something. I have a Trinity with no airbox.


Preddy I bet yours would be close with me havin duals and you not. Go ahead and shoot it to me.

Thanks
Chase
Title: Re: I need a map Monsters/Stock Bore 14:1/X2/+2 TB
Post by: preddy08 on May 29, 2008, 05:18:58 PM
Sorry, headed out the door. It should be in Krandals website under white brothers.
Title: Re: I need a map Monsters/Stock Bore 14:1/X2/+2 TB
Post by: J-HILT on June 17, 2008, 06:58:46 PM
Quote from: Mtneer Man on May 29, 2008, 05:11:50 PM
Quote from: Colorado700R on May 29, 2008, 04:06:31 PM
Quote from: Mtneer Man on May 29, 2008, 04:04:09 PM
I just need a map to get me close. Email me at cwilmoth@wilmothco.com

What intake?

I knew i forgot something. I have a Trinity with no airbox.


Preddy I bet yours would be close with me havin duals and you not. Go ahead and shoot it to me.

Thanks
Chase

Let me know if you still need something I might have something to get you started!
Title: Re: I need a map Monsters/Stock Bore 14:1/X2/+2 TB
Post by: desdak4 on June 18, 2008, 07:45:16 AM
 Mtneer Man,

Do you by chance have the map from when you had Monsters and the Trinity with no airbox?

I am trying to set up mine with just the Fuel ATV intake and Monsters and I can't find any maps out there.

Thanks,
Jay
Title: Re: I need a map Monsters/Stock Bore 14:1/X2/+2 TB
Post by: socalrappy700 on June 18, 2008, 07:53:04 AM
Quote from: desdak4 on June 18, 2008, 07:45:16 AM
Mtneer Man,

Do you by chance have the map from when you had Monsters and the Trinity with no airbox?

I am trying to set up mine with just the Fuel ATV intake and Monsters and I can't find any maps out there.

Thanks,
Jay

Check this site out.  We keep them here.

http://www.pciii.bob2bob.com/
Title: Re: I need a map Monsters/Stock Bore 14:1/X2/+2 TB
Post by: desdak4 on June 18, 2008, 08:07:26 AM
Yeah, I have been checking it out and watching for something close to show up. I am actually running  Mtneer Mans map from there now with my Trinity setup but it says it is with the box ond no lid.

Thanks,
Jay
Title: Re: I need a map Monsters/Stock Bore 14:1/X2/+2 TB
Post by: socalrappy700 on June 18, 2008, 08:09:25 AM
Quote from: desdak4 on June 18, 2008, 08:07:26 AM
Yeah, I have been checking it out and watching for something close to show up. I am actually running  Mtneer Mans map from there now with my Trinity setup but it says it is with the box ond no lid.

Thanks,
Jay

How is that map running?
Title: Re: I need a map Monsters/Stock Bore 14:1/X2/+2 TB
Post by: desdak4 on June 18, 2008, 08:35:05 AM
It runs good now BUT I am sure I will go very lean when I remove the Trinity and box and install the FUEL ATV Intake.

I have never tried to add fuel on my own useing the PCIII. Looks like I will be giving it a shot now as I need to get this thing installed.

Jay
Title: Re: I need a map Monsters/Stock Bore 14:1/X2/+2 TB
Post by: socalrappy700 on June 18, 2008, 08:36:58 AM
Quote from: desdak4 on June 18, 2008, 08:35:05 AM
It runs good now BUT I am sure I will go very lean when I remove the Trinity and box and install the FUEL ATV Intake.

I have never tried to add fuel on my own useing the PCIII. Looks like I will be giving it a shot now as I need to get this thing installed.

Jay

Its not too hard.  You can just mess with it a few points and try it out. 
Title: Re: I need a map Monsters/Stock Bore 14:1/X2/+2 TB
Post by: Mtneer Man on June 21, 2008, 08:30:17 AM
Quote from: desdak4 on June 18, 2008, 08:35:05 AM
It runs good now BUT I am sure I will go very lean when I remove the Trinity and box and install the FUEL ATV Intake.

I have never tried to add fuel on my own useing the PCIII. Looks like I will be giving it a shot now as I need to get this thing installed.

Jay

That map is VERY RICH. I ran it without an airbox for a month or two and my plug was still black. Id say you will be ok with the Fuel Intake.

Chase
Title: Re: I need a map Monsters/Stock Bore 14:1/X2/+2 TB
Post by: desdak4 on June 21, 2008, 10:29:25 AM
You took the air box out and still ran rich with the map on the map site? Holly ^*(^, I will have to look at my plug and give it a try. My bike ran good last week but we will see.

Thanks for the info,
Jay
Title: Re: I need a map Monsters/Stock Bore 14:1/X2/+2 TB
Post by: russ-russ on June 21, 2008, 01:45:43 PM
Chase, go to Krandall's site and download CMAT's map, that should be very close to your setup.  :thumbs:
Title: Re: I need a map Monsters/Stock Bore 14:1/X2/+2 TB
Post by: Mtneer Man on June 22, 2008, 10:31:21 AM
Russ, Thanks but i got it on a dyno and got a custom map made.  :clap:
Title: Re: I need a map Monsters/Stock Bore 14:1/X2/+2 TB
Post by: Troy on June 26, 2008, 09:25:38 AM
So where's the dyno sheet :thumbs: