Text only | Text with Images

RaptorSource.com

Raptor 700 Information => 700 General Discussion => Topic started by: Gunz on October 16, 2008, 05:02:47 PM

Title: I need a new map for a big5 and sup6...
Post by: Gunz on October 16, 2008, 05:02:47 PM
I need a couple of maps

1st
Barker inframes no qc
ProDesign w/KN no lid
PCIII
Dynatek non programmable
+3 KDS throttle body
HotCam 2

2nd
Barker inframes no qc
ProDesign w/KN no lid
PCIII
Dynatek non programmable
+3 KDS throttle body

3rd
Barker inframes no qc
ProDesign w/KN no lid
PCIII
Dynatek non programmable
HotCam 2

Thanks to whoever can get me these maps. Dyno runs me $250 a wack.
Title: Re: I need a new map for a big5 and sup6...
Post by: Krandall on October 16, 2008, 05:16:03 PM
did you check out pciii.raptorsource.com?
Title: Re: I need a new map for a big5 and sup6...
Post by: Gunz on October 16, 2008, 05:23:04 PM
Yeah, that was the very 1st thing I did. No luck though.
Title: Re: I need a new map for a big5 and sup6...
Post by: Krandall on October 16, 2008, 05:34:44 PM
oops, my bad, didn't see you had a dynatek. :(
Title: Re: I need a new map for a big5 and sup6...
Post by: Colorado700R on October 16, 2008, 06:20:22 PM
Quote from: 4gunz4x4z on October 16, 2008, 05:02:47 PM
I need a couple of maps

1st
Barker inframes no qc
ProDesign w/KN no lid
PCIII
Dynatek non programmable
+3 KDS throttle body
HotCam 2

2nd
Barker inframes no qc
ProDesign w/KN no lid
PCIII
Dynatek non programmable
+3 KDS throttle body

3rd
Barker inframes no qc
ProDesign w/KN no lid
PCIII
Dynatek non programmable
HotCam 2

Thanks to whoever can get me these maps. Dyno runs me $250 a wack.



Call Kam at KBR.  Might be able to hook you up  ;)
Title: Re: I need a new map for a big5 and sup6...
Post by: wobble on October 16, 2008, 06:37:56 PM
Quote from: 4gunz4x4z on October 16, 2008, 05:02:47 PM
I need a couple of maps

1st
Barker inframes no qc
ProDesign w/KN no lid
PCIII
Dynatek non programmable
+3 KDS throttle body
HotCam 2

Thanks to whoever can get me these maps. Dyno runs me $250 a wack.

My build is very close to that. I'm running setting #2 on the programmable ignition, but from what I've read #2 on the non-programmable is the same. You are welcome to try my map out if you'd like. It would get you very close.
Title: Re: I need a new map for a big5 and sup6...
Post by: Bert on October 16, 2008, 10:44:51 PM
Quote from: 4gunz4x4z on October 16, 2008, 05:02:47 PM

Thanks to whoever can get me these maps. Dyno runs me $250 a wack.
There's a great dyno guy in Perry Iowa if your close...
Title: Re: I need a new map for a big5 and sup6...
Post by: Gunz on October 17, 2008, 11:55:57 AM
Quote from: wobble on October 16, 2008, 06:37:56 PM
Quote from: 4gunz4x4z on October 16, 2008, 05:02:47 PM
I need a couple of maps

1st
Barker inframes no qc
ProDesign w/KN no lid
PCIII
Dynatek non programmable
+3 KDS throttle body
HotCam 2

Thanks to whoever can get me these maps. Dyno runs me $250 a wack.

My build is very close to that. I'm running setting #2 on the programmable ignition, but from what I've read #2 on the non-programmable is the same. You are welcome to try my map out if you'd like. It would get you very close.

Yeah send it to me. detail your mods too, thanks
redmyk@cox.net
Title: Re: I need a new map for a big5 and sup6...
Post by: Gunz on October 17, 2008, 11:56:33 AM
Quote from: Colorado700R on October 16, 2008, 06:20:22 PM
Quote from: 4gunz4x4z on October 16, 2008, 05:02:47 PM
I need a couple of maps

1st
Barker inframes no qc
ProDesign w/KN no lid
PCIII
Dynatek non programmable
+3 KDS throttle body
HotCam 2

2nd
Barker inframes no qc
ProDesign w/KN no lid
PCIII
Dynatek non programmable
+3 KDS throttle body

3rd
Barker inframes no qc
ProDesign w/KN no lid
PCIII
Dynatek non programmable
HotCam 2

Thanks to whoever can get me these maps. Dyno runs me $250 a wack.

Call Kam at KBR.  Might be able to hook you up  ;)

Sent him a PM, thanks
Text only | Text with Images