RaptorSource.com

Raptor 700 Information => 700 General Discussion => Topic started by: digitalhearing on August 08, 2008, 06:24:30 PM

Title: Dyno Sheet of my Kenz 797 *PIC*
Post by: digitalhearing on August 08, 2008, 06:24:30 PM
I had David at Rooster Built dynotune my quad this week.  He was able to get a little more power and created a smoother curve than was in the bike.  Thanks David for your all of your effort and everyone that has contributed to getting this motor where it is today.
(http://i239.photobucket.com/albums/ff313/digitalhearing/DynoSheet8-8-2008005.jpg)
Grant
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: russ-russ on August 08, 2008, 06:35:06 PM
Nice Grant!  That is badass.
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: Kenny on August 08, 2008, 06:47:23 PM
Very nice Grant! :thumbs:
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: Krandall on August 08, 2008, 07:08:46 PM
Niiiiiiiiiiiiiiiiiiiiice!
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: Peelz on August 08, 2008, 07:47:22 PM
83 hp? pfffttt. whatever...... ???






















j/k  :rockon: That is nearly twice what my 660 hits :rofl:
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: digitalhearing on August 08, 2008, 07:54:55 PM
Thanks guys, now If I can keep it up on all 4's  :P  and not roll the bitch at the finish line.   :'(

Grant
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: Peelz on August 08, 2008, 08:05:52 PM
Quote from: digitalhearing on August 08, 2008, 07:54:55 PM
Thanks guys, now If I can keep it up on all 4's  :P  and not roll the bitch at the finish line.   :'(

Grant

no doubt! 83 hp is no good when you're on your back! :grin_nod:
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: SUB454 on August 08, 2008, 09:09:36 PM
Looks Great brotha :thumbs:
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: RaptorRandy on August 08, 2008, 10:16:27 PM
Damn Grant......that's pretty good for a bandaided OEM 105mm bore with one of them evac valves that only work if your motors shit   :lol:  Why hell, that thing may be faster than a speeding Bullet now  :grin_nod:


Good going my friend.....glad to see your getting the most out of your combination  :thumbs:





Randy
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: BRAD on August 08, 2008, 10:39:24 PM
Nice numbeers man
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: RaptorRandy on August 08, 2008, 11:10:23 PM
Those right there are the highest numbers a single cylinder 4 stroke has put down on that dyno to date.






Eventually that will change   :P     :lol:
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: digitalhearing on August 09, 2008, 12:49:47 AM
Thanks Randy, this motor has always been strong-- (after the head gasket problem was solved).  I know not to sleep with both eyes shut cause everyone is gunn'n to be at the top first.

Grant
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: digitalhearing on August 09, 2008, 12:51:09 AM
Quote from: SUB454 on August 08, 2008, 09:09:36 PM
Looks Great brotha :thumbs:

Thanks Big Mike, I needed some power with the extra heavy (and safer) parts I am putting back on this quad.

Grant
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: Bert on August 09, 2008, 08:23:19 AM
That's just crazy Grant   :thumbs:

Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: digitalhearing on August 09, 2008, 12:58:33 PM
Quote from: Bert on August 09, 2008, 08:23:19 AM
That's just crazy Grant   :thumbs:
Yea, I think it will be crazy fun with this new found tq from Rooster Built.

Grant
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: RaptorRandy on August 09, 2008, 01:51:38 PM
Quote from: digitalhearing on August 09, 2008, 12:58:33 PM
Quote from: Bert on August 09, 2008, 08:23:19 AM
That's just crazy Grant   :thumbs:
Yea, I think it will be crazy fun with this new found tq from Rooster Built.

Grant




You won't believe the seat of the pants difference a first class tune will give you  :thumbs:
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: 1FST690 on August 09, 2008, 03:03:41 PM
Sweet graph Grant. It looks like it feels on the hill. Pullin like a MONSTER!
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: PDX Raptor on August 09, 2008, 07:27:26 PM
Just curious, anyone know what Bruce put down on his motor??
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: kyledvor61 on August 09, 2008, 07:35:21 PM
my yfz's puttin down the same numbers :grin_nod:
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: Peelz on August 09, 2008, 08:36:03 PM
Quote from: kyledvor61 on August 09, 2008, 07:35:21 PM
my yfz's puttin down the same numbers :grin_nod:

Yeah.....if it's being pulled by a raptor..... :rofl:
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: kyledvor61 on August 09, 2008, 09:01:21 PM
Quote from: Peels660 on August 09, 2008, 08:36:03 PM
Quote from: kyledvor61 on August 09, 2008, 07:35:21 PM
my yfz's puttin down the same numbers :grin_nod:

Yeah.....if it's being pulled by a raptor..... :rofl:
no same numbers, 3 and 8 :rofl:
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: Peelz on August 09, 2008, 09:15:28 PM
Quote from: kyledvor61 on August 09, 2008, 09:01:21 PM
Quote from: Peels660 on August 09, 2008, 08:36:03 PM
Quote from: kyledvor61 on August 09, 2008, 07:35:21 PM
my yfz's puttin down the same numbers :grin_nod:

Yeah.....if it's being pulled by a raptor..... :rofl:
no same numbers, 3 and 8 :rofl:


:rofl:
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: kyledvor61 on August 09, 2008, 09:17:45 PM
Quote from: Peels660 on August 09, 2008, 09:15:28 PM
Quote from: kyledvor61 on August 09, 2008, 09:01:21 PM
Quote from: Peels660 on August 09, 2008, 08:36:03 PM
Quote from: kyledvor61 on August 09, 2008, 07:35:21 PM
my yfz's puttin down the same numbers :grin_nod:

Yeah.....if it's being pulled by a raptor..... :rofl:
no same numbers, 3 and 8 :rofl:


:rofl:
da dun chh :rofl:
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: exentix on August 10, 2008, 10:42:30 AM
thats pretty freakin impressive numbers!
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: J-HILT on August 10, 2008, 10:49:36 AM
beautiful numbers Grant...That is a beast for sure. Glad you got a little more out of it!! :batman:
Title: Re: Dyno Sheet of my Kenz 797 *PIC*
Post by: digitalhearing on August 10, 2008, 12:39:29 PM
Thanks, I have gone about as far with this build as I can, now I get to ride and have fun with it.

Grant