so i took a little bit of all your advice and i did the front wheels and dust shields last night,
i painted the wheels and control arms and bumper black and the dust shields dark blue(same as the plastic)
i sanded them lightly with fine steel wool then sprayed a light coat of metal rust oleum industrial grade primer
i let it set for about 2 hours(dinner at outback, it was lovely..haha) then re primed a normal coat and let it set for half an hour.
im not usually this patient! then i sprayed 2 coats of black 20 minutes apart let it dry for half an hour or so and put em on.
they look rad as hell and hopefully they will hold up! im going to start the rear wheels today il probably do the nerf bars and grab bar too.
i forgot to take pics but i will today after work