Durhamtown Racing Schedule

Started by bamaquad, July 02, 2008, 02:44:23 PM

Previous topic - Next topic

kyledvor61

Quote from: RR34 on July 06, 2008, 12:22:49 PM
i was sitting on my fender

your supposed to lean into the corner, not the other side :thumbs:

RR34

i was leaning in the corner dumbass
f*ck the system? i didnt even know there was a system!


http://g.imageshack.us/g.php?h=119&i=12144039584121zx

kyledvor61

Quote from: RR34 on July 06, 2008, 12:43:24 PM
i was leaning in the corner dumbass

im guessing to much throttle. gotta feather it and dont over rev at all

RR34

im pretty sure its my tires because i usually pump out lap after lap on that track hauling ass and never spin out. yesterday id get it into a good drift like always then id break loose completely and spin around. my friend on his YFZ was pacing me and never spun out. ???
f*ck the system? i didnt even know there was a system!


http://g.imageshack.us/g.php?h=119&i=12144039584121zx

bamaquad

If the track had blacked over it's like running on an oil slick if you're on knobbies.

bamaquad

#20
You going to make it down there to race on the 19th?  Bert, RR34

RR34

theres a real good chance i will be there. cant tell for sure as of right now though ???
f*ck the system? i didnt even know there was a system!


http://g.imageshack.us/g.php?h=119&i=12144039584121zx

Bert

Quote from: bamaquad on July 06, 2008, 03:42:06 PM
You going to make it down there to race on the 19th?  Bert, RR34
There's a chance for the Nov race but thats too far away to say for sure.
Its a long haul from MN

FoundArealQuad

I might try to go watch that one :thumbs:
DMC Force 4s, PCIII, Mod Quad Intake, Flexx Bars, Alba Nerfs with Pro Pegs, Rox +2 adjustable risers, CCP, EHS airbox cover

Bert

Quote from: Polarass525 on July 08, 2008, 04:24:02 PM
I might try to go watch that one :thumbs:
Replace your shocks w/ struts & lower that bitch

bamaquad

Quote from: Bert on July 08, 2008, 06:39:13 PM
Quote from: Polarass525 on July 08, 2008, 04:24:02 PM
I might try to go watch that one :thumbs:
Replace your shocks w/ struts & lower that bitch

Yeah, what he said.

FoundArealQuad

I've been thinking about it. Rath anti sway bar would also be nice
DMC Force 4s, PCIII, Mod Quad Intake, Flexx Bars, Alba Nerfs with Pro Pegs, Rox +2 adjustable risers, CCP, EHS airbox cover

Bert

Quote from: Polarass525 on July 08, 2008, 08:34:02 PM
I've been thinking about it. Rath anti sway bar would also be nice
What about a T&D Racing sway bar?

FoundArealQuad

Not spending anymore money on the quad until my truck is done :thumbs:
DMC Force 4s, PCIII, Mod Quad Intake, Flexx Bars, Alba Nerfs with Pro Pegs, Rox +2 adjustable risers, CCP, EHS airbox cover

Bert

Quote from: Polarass525 on July 08, 2008, 10:21:12 PM
Not spending anymore money on the quad until my truck is done :thumbs:
What kind of a friend would you be if you didn't take advantage of Tommy the Machinist ( a.k.a #1 buddy)