Alkire's Practice Bike................In The Works

[DL700]

yeah the main axle nut ....not the Hub nuts

[Alkire193]

yeah the main axle nut ....not the Hub nuts

Sorry, I misspoke. those set screw dont tear up the threads on the axle?

[Spartan]

you remove the set screws before you thread it onto the axle, and there's a groove at the end of the threads that the set screw bites into.

Wheel hub nut wise, I haven't really seen any alternatives other than what comes on the aftermarket axles. that's what the hitch pin is for...

[Alkire193]

you remove the set screws before you thread it onto the axle, and there's a groove at the end of the threads that the set screw bites into.

Wheel hub nut wise, I haven't really seen any alternatives other than what comes on the aftermarket axles. that's what the hitch pin is for...

Thanks for the info DL and Spartan. ill see about getting one of those over to Preddy

[preddy08]

Christmas at the Preddy house!

List of what I've got in my hands:

axle
stabilizer
sprocket hub
piston
both slingshots
precision clamps

[preddy08]

could you get 2 of these kits coming also. I used 90% of the kit on Mikes bike and ran short.

http://www.rockymountainatvmc.com/productDetail.do?navType=type&webTypeId=117&navTitle=Tools%2FShop&webCatId=22&keyword=bolt+kit&prodFamilyId=16412

Really makes going back together alot easier and looks alot nicer!

[preddy08]

I'm going to need a bumper pretty soon also. I'll need to weld on new tabs before the frame goes off to PC'er

[Alkire193]

Bumper is on its way, got the shipping invoice today. Think late this week or middle next week. That first KB order didn't take long and the bumper is coming from KB also.

Do you want to do some fancy pro bolt stuff or just the TUSK kits? If just the TUSK, ill order them after you respond to this.

What about the twin row carrier? Are you going to punch out the bearings or do you want me to just pick up a new carrier? Those bearings must be shot by now.

I'll also send a 34T honda rear today  


LOTS more to come sir! 

[preddy08]

To quote the great Ice Cube... "today was a good day"


Looky what I came home to today!

[preddy08]

Ok so today I got

GYTR clutch basket
set of 4 XCR tires
HR +5 crank
Power mad dumbo ears
Pro Armor bumper & bumper
Black hood and tank topper

I think thats about it for today

[preddy08]

OK Chris. I just took off the front a-arms and two of the bolts were stripped. If you want everything to be 100% good to go you should order ALL NEW OEM bolts, bushings and sleeves for the front end.


Sorry, I dont mean to be a stickler and mean for you to buy more shit than you have to but this front end WILL deserve all new parts.

[preddy08]

Chris, your bike is now 100% in pieces!

[Bert]

Damn!

[Peelz]

Chris, your bike is now 100% in pieces!

If, sometime in the future, you work on my bike, please do not post pictures of it torn down. NOT Seeing it torn in pieces is the reason I would have you do it It makes me sad.


cant wait to see this one.... 

[Alkire193]

Would you believe that lump of parts is gonna F***in FLY!? 

I am so envious of your Shawn! That is the sexiest trailer loading ramp I have ever laid eyes on 

Looks like starting with a clean slate. Anything you need, anything at all, I'll get it on the way. ANY little thing that doesn't measure up i'd be glad to get it new and fresh.

Im going to contact Houser about whether or not their kits come with those parts. Did Jason order the a-arms WITH tric trac? That might determine if I will get new hardware with the arms.

Still need the following:

Block off
Case saver
brake line clamps
grab bar shipped to my buddy Ryan for fabrication
Tether kill switch

Just ordered (in addition to everything else that is still coming in) :

+2" clutch and throttle cables (ATV Galaxy)
Braided Rear Brake cable ATV Galaxy

Love it Preddy, thanks for the photos!