wont start, water in intake i think

[kyledvor61]

I was skippin water and lost speed and flipped forward in the water, launching me, and bending the subframe. I put it back on 4 wheels and stared up right after the accident.I idled around my neighborhood for literally 10 mnutes and it was fine. comeing back down the driveway i went to get on it and cut out past 1/2 throttle. I took apart as I had to striaghten the sub frame anyway. i checked the plug and was perfect. put the tank on and plug in and fired it up. ran great in all rpm like nothing happened. put it all back together went to down the driveway and sounded worse than before. had to push it back to the garage. now it wont fire up at all. im guessing water in the airbox and filter since there was a little when i put it back together. it wouldnt be water in the gas since it idled perfect.

[Jester2893]

 

[RR34]

stand it up on its ass and pull the plug off the bottom of the airbox and see if and water comes out. if that doesnt work then take the intake boot off and do the same.

[Flynbyu]

Check to make sure there was not water in the spark plug boot. Use a little WD-40 in the cap too.

Give it a day or so and your bike should dry out.

~Brian

[Colorado700R]

the gas you idled with could have just been in the carb.  Gas in the tank could be fouled 

[kyledvor61]

I'm a f*ckin retard. f*ck f*ck f*ck



I didnt have the gas on.

explains why it idled fine, wouldnt go over 1/2, then wouldnt start





ran great while i beat the crap out of it for the past three hours

[RR34]

 

[kyledvor61]

i feel like such a dumbass

sadly its not the first time since ive gotten the yfz either

[RR34]

the petcock is a FU*KING PAIN IN THE ASS TO GET TO ON THE YFZ

[Peelz]

i feel like such a dumbass

sadly its not the first time since ive gotten the yfz either

haha, could be worse. When I flipped the 660, I broke the PB switch off the clutch perch, and couldn't give it gas. I was messin with the floats and all kinds of stuff.

[Livingmylife93]

  

[kyledvor61]

the petcock is a FU*KING PAIN IN THE ASS TO GET TO ON THE YFZ

whos the dumbass who put it there
along with having to remove the gas tank to get to the plug
and the shitty battery :'( :'(

[RR34]

the petcock is a FU*KING PAIN IN THE ASS TO GET TO ON THE YFZ

whos the dumbass who put it there
along with having to remove the gas tank to get to the plug
and the shitty battery :'( :'(

its a beast but it does have quite a few design flaws. but some cash and a dremel tool will fix everything.

[kyledvor61]

the petcock is a FU*KING PAIN IN THE ASS TO GET TO ON THE YFZ

whos the dumbass who put it there
along with having to remove the gas tank to get to the plug
and the shitty battery :'( :'(

its a beast but it does have quite a few design flaws. but some cash and a dremel tool will fix everything.

I was about to shave the piece under the gas tank out yesterday for the petcock but decided not to for now, ill do it later. I have the cbr600rr battery on order which is also the 350 battery. more oomph but its a bit bigger so I have to shave some of the stuff out for it to fit. the spark plug deal still pisses me off.

[RR34]

the petcock is a FU*KING PAIN IN THE ASS TO GET TO ON THE YFZ

whos the dumbass who put it there
along with having to remove the gas tank to get to the plug
and the shitty battery :'( :'(

its a beast but it does have quite a few design flaws. but some cash and a dremel tool will fix everything.

I was about to shave the piece under the gas tank out yesterday for the petcock but decided not to for now, ill do it later. I have the cbr600rr battery on order which is also the 350 battery. more oomph but its a bit bigger so I have to shave some of the stuff out for it to fit. the spark plug deal still pisses me off.

im a taking a dremel tool to my gas tank plastic in like 20 min. and to fix the shitty battery problems im putting a kickstart on as soon as i get some extra money.