Dynatek ignition launch limiter and shift light

[J-HILT]

I know it maybe a long shot but does anyone know enough about this dynatek to help me with the shift light and launch limiter.. I have read over the instructions but it seems that you may have to have software to do it

[Krandall]

Your best bet would be to contact SandDragon, I believe he played with the launch limiter.. I'm pretty sure it was him.

[J-HILT]

Krandall your them man..Thanks for the fast response

[Krandall]

I try.......... 

Once in a while 

[J-HILT]

Did you install yours yet

[Krandall]

naw, I'm waiting to get my dyno scheduled. Before I go I'll install it then

[SandDragon]

Don't quote me on the actual RPM... but if you hook up the purple wire, it should be @ around 4500 launch preset. You should not need the software to use this feature... you will however need the disc and the cable to change the RPM.  You only get 1 shot at the launch and then you have to turn the key off to reset the launch limit.  You should be able to test if it works by doing a WOT to see where it revs.  Since 9100ish is the limiter... 4500 is a noticable difference.  I will be trying to get some custom mapping done in the next few months (years  ).  I will share my findings.

[Krandall]

Don't quote me on the actual RPM... but if you hook up the purple wire, it should be @ around 4500 launch preset. You should not need the software to use this feature... you will however need the disc and the cable to change the RPM.  You only get 1 shot at the launch and then you have to turn the key off to reset the launch limit.  You should be able to test if it works by doing a WOT to see where it revs.  Since 9100ish is the limiter... 4500 is a noticable difference.  I will be trying to get some custom mapping done in the next few months (years  ).  I will share my findings.

The cable you can get from Dynatek. $40.

Software is available on my site.   pciii.bob2bob.com

click files on top and you're good to go.

[Sand84]

naw, I'm waiting to get my dyno scheduled. Before I go I'll install it then

Let me borrow it till sept