Mini-Winter Build

[Krandall]

MINNEAPOLIS, MN, US     05/04/2010     5:46 A.M.     OUT FOR DELIVERY

[Spartan]

SWEET! Gonna take the time off tomorrow?

[Krandall]

Yup. not sure ifI'm gonna take the whole day off or part of the day.

[preddy08]

If you even get your motor back together before I do I will fly up there and drop another bolt in your motor!

[Colorado700R]

Knowing Randy, He'll over-compensate for his previous error....




I forsee his gas cap getting Loctited on

[Krandall]

If you even get your motor back together before I do I will fly up there and drop another bolt in your motor!

[Krandall]

So.. rubbermaid.... duct taped.. check.



















entire motor duct taped.... also check...




sob roy

[Spartan]

Duct taped internal components...check check check check....

[Peelz]

So.. rubbermaid.... duct taped.. check.



















entire motor duct taped.... also check...




sob roy

you sure that's not a person? 

[Krandall]

questionable.. it could be a baby...

[Sand84]

Thats great 

[Krandall]

a few more pics.. (from the real camera this time)  
20mins of wrapping and 2 rolls of tape...  










Hey Bo,

This is what John was talking about... Looks weird. (way weird)

I don't think it's a crack in all honesty.. Is it possible for a bubble to be in the original casting?  

Think it's something to be worried about. worth taking to a shop and having filled or run it?
If you want big res pics let me know.

[phucker]

i didnt see bo to tell him to come here randi but i thought i would give you my thoughts on it. would need better pics to be  sure but it  looks like a stress crack that probably happened after it was ported, like a flaw in the metal in the casting. without seeing bigger pics i would say you might want to get it fixed, a crack like that when heat cycled will get bigger and bigger. i cant tell if it is a crack or just a bubble. if it is just a bubble and bo did see it i am sure it is just fine to run. i mean you could fix it for about 10 bucks, just stop at a welding shop and have them throa tack on it then tough it upwith a dremel or whatever tools you have. btw thats a pretty damn good looking port :thumb:

[VelociRaptor]

Ive seen that before and believe I seen it in your port now that I see the pic. Its the casting line. Like I told ya on the phone, a select few of the casting lines in the divider are pretty deep and seems to not even meet together.

[Krandall]

Here's the high res pics. just linking since they are fookin huge!

http://bob2bob.com/images/projectX/line1.JPG

http://bob2bob.com/images/projectX/line2.JPG

sweet. thanks you guys