Power Commander Maps Here!

[MoRaptor06]

Well Krandall I took the head and cylinder to a drag racing engine builder, Im talking about cars here. I asked him to do a light-medium port and polish for hill climbing and just playing around nothing serious. When I got it back it looked like it had been hogged out. It looks like he did a hell of a good job just more of a port job then I was looking for I think. I should have taken pics of it but I just got it put back together today. I dont know if this helps any krandall. I just burnt up a 104mm piston in 20 min from running it too lean, so I need to get a map. Or should I just take it straight to get it dynoed?

[jumper]

i have a 2007 700 with the hmf full cometition exhaust proflow foam intake w/o airbox lid but i am running and outerwears lid was wondering what i should do to adjust for temperature differences any help would be greatly appreciated my e-mail is jw_srt-4@hotmail.com

[Krandall]

Well Krandall I took the head and cylinder to a drag racing engine builder, Im talking about cars here. I asked him to do a light-medium port and polish for hill climbing and just playing around nothing serious. When I got it back it looked like it had been hogged out. It looks like he did a hell of a good job just more of a port job then I was looking for I think. I should have taken pics of it but I just got it put back together today. I dont know if this helps any krandall. I just burnt up a 104mm piston in 20 min from running it too lean, so I need to get a map. Or should I just take it straight to get it dynoed?

I'm thinking due to it not being a "known" port job. Your best bet may be to bring it some where. The differences in peoples porting designs can really change/affect a fuel map.

[raptecj]

Hey Krandall how goes it? Breifly met u guys out at silver lk last yr tearin into your quad. Lookin for a map like everyone. 12.5-1 je piston, hotcam 3, no airbox w lg filter & gytr intk, , run w an outerware, full gytr system, & a self p&p job.  any close is great. thx Jeff

[Krandall]

Oh yea! Remember you

How goes it?

Dont really have to much w/ that specific combo. The closest thing on file I have is:

GYTR Full - GYTR Intake- 11:1 piston, HC stg2 (dl700)


But I believe there's a decent increase between the stg2 and stg3. Plus this map has no p&p.

[nikita]

hey man, need your help with a map for pc3usb...barkers, hc3, foam int. do u have anything close to it? send me please montybox@gmail.com

THX

[Krandall]

Note:

If anyone has maps that are not on:


http://pciii.raptorsource.com 



Please sent them to:   krandall_bob@hotmail.com

[Spartan]

Any plans to expand into a PC5 section?

[Krandall]

I certainly could.

[Spartan]

I've got quite a few PC5 maps stored on my drives I could contribute also...most have the build descriptions in it.

[Krandall]

Noice.

If you want to send them my way. I'll get a section put out there. I've been wanting to update the site anyways.

[Spartan]

I'll take a look, I got it stored on 3 drives so when I get a chance I'll zip em all up and email them.

[devious700rSE]

need a map for sparks big core and fuel intake please help

[briangooseman]

I have a password and it won't let me download maps?

Thanks,
Brian

[Krandall]

Username and Password for downloading the maps can be had here: http://www.raptorsource.com/forum/index.php?topic=2699.0