Power Commander Maps Here!

[1badazz_700r]

Go to the 700 discussion section on page 2. Under my post new rims and tires/drag struts. and look at my last post. These video's will clearly show the autotune works perfect. watch the videos from top to bottom. I had no computer or anything with me. to make the autotune work right you need to run it hard for afew daysand let it do its thing. then accept the trims which will write it to the map. then unhook and remove the sensor and thats it. this info is right from jamie at fuelmoto who also owns a dyno and tunes everything. and he said these things tune perfect

[Ranger]

*DISCLAIMER* RaptorSource.com or any other people assosciated with RaptorSource can be held liable for a person/s using a wrong map on their quad and soemthing happening.

Uh, might want to reword that!

[Krandall]

lol, nice catch Ranger!

[Ranger]

Yeah somehow I missed it the first 20 times like everyone else but when I opened it up again to check for a map it jumped out at me...

[PROXT]

Does anyone have a map for

barker big bore duals
trinity intake with no lid
dynojet pc111

[Warren]

Does anyone have a map for

barker big bore duals
trinity intake with no lid
dynojet pc111

send an email to techquadshop. i'm pretty sure i got my map for those mods from steve at TQS. 

[Krandall]

Otherwise one of these 2 should be REAL close for you

No QC - Trinity Intake - K&N Filter (robert.lisicki)

No QC - Trinity Intake - K&N Filter (Crafty Steve)

[PROXT]

Where do u get those maps from.

[Krandall]

check my sig or first post

[PROXT]

Well just got it all hooked up. The map thats in the pc111 that quadsquad put in dont seem right. After its warmed up and give it a bit of rev its putting sparks out the back of the exhaust. Must be running too lean. Dont know what to do now.

[Krandall]

posted in your thread.

[Peelz]

posted in your thread.

same here.

[Krandall]

Dont forget to send your maps to me when you get them!!!!

[gofast68]

So I do more lurking around here than anything else, but figured I'd try and see what's available.

I'm looking for a Map now that I've finally forked out some change for my '07.

Mods:
KDS CNC head +2 valves
RJ Cam
+3 Throttle Body
FCI intake
Stock bore/stroke
12.5 CP piston
Barker Duals
Dynatek Curve 2

I'd like to get something close and then have it fine tuned locally. Anyone wanna help out?

[Krandall]

Hmmm, I don't know if we have anything like that. Are you sure you don't want to add a stroker in that mix?