Extended stock swinger PICS!

[Shawnz]

any chance of re-locating or just adding the forward skid bolt bosses so that you can still use a skid plate?

[Out Back Welding]

any chance of re-locating or just adding the forward skid bolt bosses so that you can still use a skid plate?

I removed the old holes, welded them up, and buffed em down where u cant tell they were even there. Then i drilled and tapped 2 new holes. So yeah, its going to have the skid mounted back up after the shock is in place

[Firemann32]

Ok, so without reading through all 5 pages, is there someone on this site that is doing them, I have 2 spare swingarms, I'd like to get at least one if not both extended.

[Krandall]

When does mass production start?   Oh and where does the line start?   

+1

[SprinterX]

Ok, so without reading through all 5 pages, is there someone on this site that is doing them, I have 2 spare swingarms, I'd like to get at least one if not both extended.

King of Bling from the other two Raptor sites can hook you up with extending your stock swinger. There was a group buy last year on them. I had a +4 done for my sand set-up and the work is nice.

dpe_ele's work here looks excellent too.

[Shawnz]

didn't KoB quit doing them?

[Firemann32]

Ok, so without reading through all 5 pages, is there someone on this site that is doing them, I have 2 spare swingarms, I'd like to get at least one if not both extended.

King of Bling from the other two Raptor sites can hook you up with extending your stock swinger. There was a group buy last year on them. I had a +4 done for my sand set-up and the work is nice.

dpe_ele's work here looks excellent too.

Yea I saw that post so I went and logged on to Modded Raptor to look through it.

didn't KoB quit doing them?

Well that sucks if he did, I guess I'll just PM him and find out.........

If you guys think of anyone else let me know, Thanks!

[Out Back Welding]

  Thx for all the complements!

I got my spring and o-ring in today, should have everything togeather tomarrow

We would love to make more of these, should have made a jig.... :'(

We used all my dads tools to do this, complements of Out Back Aluminum Welding!

We were giving some thought as to how much to charge for something like this. This wouldnt be something that We could do in the summer, due to the fact that Out Back is booked with work during that time.

So what do u guys think something like this would be worth shipped back to your door? Top dollar? Would it be easier to just swap cores?

I see stock swingers for sale on ebay from $50-100.

[Firemann32]

Thx for all the complements!

I got my spring and o-ring in today, should have everything togeather tomarrow

We would love to make more of these, should have made a jig.... :'(

We used all my dads tools to do this, complements of Out Back Aluminum Welding!

We were giving some thought as to how much to charge for something like this. This wouldnt be something that We could do in the summer, due to the fact that Out Back is booked with work during that time.

So what do u guys think something like this would be worth shipped back to your door? Top dollar? Would it be easier to just swap cores?

I see stock swingers for sale on ebay from $50-100.

If you start making them, I'll be first in line and I'll send you two swingarms, one to do for me and one for you to keep as your "core".

Let me know when/if you start doing them.

[Firemann32]

Well crap I went back and started looking at the pictures and then it dawned on me your doing them for a 700 and I'm still really partial to my 660.  If you start making them for the 660's my offer stands.

[SprinterX]

didn't KoB quit doing them?

It wasn't actually KoB that was doing the work. I believe it was a buddy of his from Cycle Works. I'd be surprised if he wouldn't do any more.

[Colorado700R]

I sent KOB a PM on MR about a week ago and he was still intrested in doing them.

[Firemann32]

I sent KOB a PM on MR about a week ago and he was still intrested in doing them.

Told me the same.

I am and its $275 plus return shipping usually like to do it by check or cashiers check to keep from getting beat up on paypal fees. we can do 3 or 4 inch may try to do a 2 inch again not sure if it will work.about a 2-3 day turn around on them.

Thanks Robert

[Shawnz]

I smell a group buy - lol

[Out Back Welding]

I sent KOB a PM on MR about a week ago and he was still intrested in doing them.

Told me the same.

I am and its $275 plus return shipping usually like to do it by check or cashiers check to keep from getting beat up on paypal fees. we can do 3 or 4 inch may try to do a 2 inch again not sure if it will work.about a 2-3 day turn around on them.

Thanks Robert

wow! $275! thats cheap. I'ts alot of work to do this.