Piston installment ? About to install but ? HURRY

Started by MORAPTOR700, November 29, 2009, 01:28:36 PM

Previous topic - Next topic

MORAPTOR700

I have a CP 11:5.1 piston and about ready to install and does it matter what direction the piston goes. (front to back) It doesn't look to matter but just want to be sure. Directions don't say and it has no arrow for direction. Thanks Tony Please Hurry
2007 Raptor 700SE    Black/Orange

Colorado700R


Warren

i thought it did matter. i can't remember how to tell though. sorry. call kenny.
:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB

Kenny

The smaller valve reliefs face the front, toward the oil tank :thumbs:
KDS Racing
685 Hope Rd
Floyd VA 24091
NEW PHONE 540-818-9154
Paypal: kenny@swva.net

:satan:

MORAPTOR700

Thanks Kenny I was about to call you but I didn't want to bother you on a Sunday. I looked at the valve relief earlier and they looked to be the same but after you said that I went and looked again and sure as shit they are different. Thanks again Tony
2007 Raptor 700SE    Black/Orange

Kenny

Quote from: MORAPTOR700 on November 29, 2009, 01:43:49 PM
Thanks Kenny I was about to call you but I didn't want to bother you on a Sunday. I looked at the valve relief earlier and they looked to be the same but after you said that I went and looked again and sure as shit they are different. Thanks again Tony
You are very welcome!! I don't mind calls on Sunday. If I mind, or can't find my phone, I don't answer :lol: You need to call about that TB anyway :thumbs:
KDS Racing
685 Hope Rd
Floyd VA 24091
NEW PHONE 540-818-9154
Paypal: kenny@swva.net

:satan:

MORAPTOR700

#6
Made good progress today on the build. Got it tore down and got the new piston in. Tomorrow will send out my head to get ported. Should get a BIG package this week along with a new TB. When the head gets back the build will continue. Hopefully around the New Year will fire it up. :thumbs:



2007 Raptor 700SE    Black/Orange

MORAPTOR700


[/quote] You are very welcome!! I don't mind calls on Sunday. If I mind, or can't find my phone, I don't answer :lol: You need to call about that TB anyway :thumbs:
[/quote]

Kenny as bad as I don't want to I going to use the +3 for now, I've spent enough money for now, but I will keep the +4 in mind. :thumbs: Do you think one of those velocity stack or whatever you put in it will fit in a +3? I'll probably be calling you about one of those evac. valve's this week. Thanks Tony
2007 Raptor 700SE    Black/Orange

Kenny

The +3 will serve you well. I don't necessarily recommend that you change to the Velocity PRO version since you already have the +3...... There are other places to put your money that will see more power gain. We are building the velocity stack to fit all stock body TB's for use as an adapter to the big White Knuckle tube or my new thermoplastic piece. Again, there is plenty to do until then :thumbs:  
KDS Racing
685 Hope Rd
Floyd VA 24091
NEW PHONE 540-818-9154
Paypal: kenny@swva.net

:satan:

MORAPTOR700

Oh boy got some more go fast goodies tonight from the big brown truck!!! :clap: Got my used +3 KDS TB. Looks good and the butterfly in the TB looks to centered up good in the bore. I was told to check that. Got the 11:5.1 piston Sunday night. Got the cyl. head off Tuesday in the mail to get ported  :thumbs: :thumbs: and hopefully get it back mid week next week. Also waiting on my Big 3 package. Oh man setting here writing this thinking about all the go fast goodies I think im starting to get a woody!!!!!!!!!!!!!  :nod:
2007 Raptor 700SE    Black/Orange

NaturalRaptor

Saaawwweeet! Who is doing your porting? What stage port job? Bigger vales?  ???
It takes 43 muscle's to frown and 17 to smile, but only 3 for proper trigger pull.

MORAPTOR700

Quote from: NaturalRaptor on December 02, 2009, 08:05:08 PM
Saaawwweeet! Who is doing your porting? What stage port job? Bigger vales?  ???

TRF is doing the port work. They are doing the mild port job. Stock valves. He thought 4-5 HP gain in HP and would substain the HP longer. They next stage port job they call the extreme and it was more money than I wanted spend at this time and I don't know if it would have benefited me any more for what I'm doing. Momma has said that I have spent enough for this go around.  :nod:
2007 Raptor 700SE    Black/Orange

NaturalRaptor

It takes 43 muscle's to frown and 17 to smile, but only 3 for proper trigger pull.

MORAPTOR700

ERMAHGERD the big brown truck come by again today. :clap: Can you say BARKER Dual's. :nod: They are so pretty I hate to put them on!!
2007 Raptor 700SE    Black/Orange

jstev

So just one trip to the dunes with some fast quads and you are already tearing into that shiney thing??  so funny.