Little Sahara dyno pulls and tunes w/specs. DYNO CHARTS inside.

[Gunz]

I would have to say he's doing better then pretty good, considering he is only a 727, 70hp on a basic build is f'n awesome. Thats up against an Racers Edge stage 1 put'n down 69hp, and a KDS head put'n down 71hp.

[Gunz]

Alkire193's Dyno

Hot Rods +5mm Crank
105mm CP 13:1 piston
Dynatek Programmable Ignition
RJ Cam
+2 Ferrera Valves, Kibble Springs
CNC intake and exhaust
BARKER DUALS
FCI INTAKE
Power Commander 3
+3mm KDS Throttle Body

[NaturalRaptor]

My build specs:  Gunnie you can copy them and paste them under my graph.
Dyno Mike did a super job and I will have an autotune kit for sale shortly!
Also, Dyno Mike printed the wrong torque graph, My build was 69 hp and 58 torque but he printed the 52 torque.

Racerz Edge Stage 1 head, with Ferra +1 valves and springs
CP 10.75:1, 105mm piston
Stock Stroke
X4 cam
KDS +3 TB
PC5
FCI
Dynatek Programmable on #2

Pump Gas   

[Hefe]

here is mine

Bone stock

[Gunz]

We need Frog69 and Jessie K's dyno's.... anybody else, I can't remember.

[Troy]

Are we going to do race results on these dyno charts too?  Not to brag anyone's build up over another but it is interesting how big of a power spread you can have and still have competitive racing.

[Gunz]

Are we going to do race results on these dyno charts too?  Not to brag anyone's build up over another but it is interesting how big of a power spread you can have and still have competitive racing.

Sure you can, but that puts me out cause I didnt get to race. That leaves you and Roy. Next year I'll do what I can to have a legal track setup for us. Still need your specs Troy.

[Colorado700R]

MEOW!!!!

[Troy]

Come on Gunny, you are at least a top ten bike out of the eleven we raced 

[Jessie]

i found mine but its in pink ink lol i made 46.96 hp and 43.36 tq

[Peelz]

Come on Gunny, you are at least a top ten bike out of the eleven we raced 

nyuk nyuk nyuk

[Texas700]

Those are some good numbers. I hope i'm up there after my build. I'm waiting on the cam shootout to decide on what i am going with. Dyno Mike is awesome. He knows his stuff and is super cool. Do they still have the dyno in the trailer? Last time i did mine the wind was blowing 65 mph and so much sand blowing we had to leave the doors shut up and  he said that it would probably affect the dyno numbers but he could get close.

[Gunz]

i found mine but its in pink ink lol i made 46.96 hp and 43.36 tq

That'll work, post your engine mods.

[Gunz]

So right now we have a few big builds representing Racers Edge, Barker, KDS, and BO/NOS setup.


83hp    58tq RE3 bike troy
81.5hp 58tq Bark2 bike gunz
72.5hp 60tq KDS2 bike Alkire
70hp    58tq Bo bike w/NOS 108hp 73tq Tonto
69hp    58tq RE1 bike NaturalRaptor


I can promise the bark2, RE3, and NOS bike will continue to get tweaked on. I personally am hoping to get close to 90hp without changing bore, stroke, and compression. Once I get all I can out of it I really would like to throw a Barker3 or RE3 on her.

[Colorado700R]

14hp 7 TQ Briggs and stratton KDS bike